SarkariManzil
BPSC · TRE Teacher Recruitment

BPSC TRE Chemistry Set 8

By Archit Kumar · Published: 18 October 2026 · 40 questions · English + हिंदी
BPSC TRE marking rule: +1 for a correct answer, −1/3 for a wrong answer and −1/3 for a question left blank. In the online test, choose option E (Do not attempt) to skip a question safely at 0 marks — never leave a question blank.
▶ Play this set online — free, with timer, score & rank

Read all 40 questions below with answers and explanations, or play the set online in the SarkariManzil practice app. In the app, sets unlock in order — submit Set N to open Set N+1.

Q1.Biomolecules

The chemical name of vitamin C is:

विटामिन C का रासायनिक नाम है:

  1. A.Ascorbic acidऐस्कॉर्बिक अम्ल✓ Correct
  2. B.Citric acidसाइट्रिक अम्ल
  3. C.Lactic acidलैक्टिक अम्ल
  4. D.Oxalic acidऑक्सेलिक अम्ल
Answer: A — Ascorbic acid
Vitamin C is L-ascorbic acid, a water-soluble vitamin whose deficiency causes scurvy. Its chemical name 'ascorbic' literally comes from 'anti-scorbutic'.विटामिन C एल-ऐस्कॉर्बिक अम्ल है, एक जल-विलेय विटामिन जिसकी कमी से स्कर्वी रोग होता है। इसका रासायनिक नाम 'ऐस्कॉर्बिक' स्वयं 'स्कर्वी-रोधी' अर्थ से बना है।
Q2.Biomolecules

Lactose (milk sugar) is composed of the two monosaccharide units:

लैक्टोज़ (दूध की शर्करा) किन दो मोनोसैकेराइड इकाइयों से बनी होती है:

  1. A.Glucose and fructoseग्लूकोज़ और फ्रक्टोज़
  2. B.Glucose and galactoseग्लूकोज़ और गैलेक्टोज़✓ Correct
  3. C.Two glucose unitsदो ग्लूकोज़ इकाइयाँ
  4. D.Fructose and galactoseफ्रक्टोज़ और गैलेक्टोज़
Answer: B — Glucose and galactose
Lactose, the sugar of milk, is a disaccharide built from β-D-galactose and D-glucose joined by a glycosidic linkage. (Sucrose is glucose + fructose; maltose is glucose + glucose.)दूध की शर्करा लैक्टोज़ एक डाइसैकेराइड है, जो β-D-गैलेक्टोज़ और D-ग्लूकोज़ के ग्लाइकोसिडिक बंध से बनता है। (सुक्रोज़ = ग्लूकोज़ + फ्रक्टोज़; माल्टोज़ = ग्लूकोज़ + ग्लूकोज़।)
Q3.Polymers

The monomer of PVC is:

PVC का एकलक (monomer) है:

  1. A.Tetrafluoroethyleneटेट्राफ्लुओरोएथिलीन
  2. B.Styreneस्टाइरीन
  3. C.Vinyl chlorideविनाइल क्लोराइड✓ Correct
  4. D.Acrylonitrileएक्रिलोनाइट्राइल
Answer: C — Vinyl chloride
PVC is polyvinyl chloride, the addition polymer of vinyl chloride (CH2=CHCl). It is widely used for pipes, cable insulation and floor tiles.PVC पॉलीविनाइल क्लोराइड है, जो विनाइल क्लोराइड (CH2=CHCl) का योगात्मक बहुलक है। इसका उपयोग पाइप, केबल रोधन और फर्श की टाइलों में व्यापक रूप से होता है।
Q4.Polymers

Terylene (Dacron) is formed by the condensation of:

टेरिलीन (डेक्रॉन) किन पदार्थों के संघनन से बनता है:

  1. A.Adipic acid and hexamethylenediamineएडिपिक अम्ल और हेक्सामेथिलीनडाइएमीन
  2. B.Caprolactamकैप्रोलैक्टम
  3. C.Phenol and formaldehydeफीनॉल और फॉर्मेल्डिहाइड
  4. D.Ethylene glycol and terephthalic acidएथिलीन ग्लाइकॉल और टेरेफ्थेलिक अम्ल✓ Correct
Answer: D — Ethylene glycol and terephthalic acid
Terylene (Dacron) is a polyester formed by condensation of ethylene glycol with terephthalic acid, eliminating water. It is used for wrinkle-resistant fabrics and tyre cords.टेरिलीन (डेक्रॉन) एक पॉलीएस्टर है, जो एथिलीन ग्लाइकॉल और टेरेफ्थेलिक अम्ल के संघनन से जल निकलकर बनता है। इसका उपयोग सलवट-रोधी कपड़ों और टायर की डोरियों में होता है।
Q5.Chemistry in Everyday Life

The drug equanil is:

इक्वैनिल (Equanil) औषधि है:

  1. A.An antibioticएक प्रतिजैविक
  2. B.A tranquilizerएक प्रशांतक (tranquilizer)✓ Correct
  3. C.An analgesicएक पीड़ाहारी
  4. D.An antisepticएक पूतिरोधी (antiseptic)
Answer: B — A tranquilizer
Equanil (meprobamate) is a tranquilizer — a drug used to relieve anxiety, stress and mental tension. Aspirin is an analgesic, morphine a narcotic analgesic and penicillin an antibiotic.इक्वैनिल (मेप्रोबामेट) एक प्रशांतक (tranquilizer) है — चिंता, तनाव और मानसिक दबाव दूर करने वाली औषधि। एस्पिरिन पीड़ाहारी, मॉर्फीन स्वापक पीड़ाहारी और पेनिसिलिन प्रतिजैविक है।
Q6.Environmental Chemistry

Acid rain is rain water having a pH:

अम्ल वर्षा (acid rain) उस वर्षा-जल को कहते हैं जिसका pH होता है:

  1. A.Below 4.04.0 से नीचे
  2. B.Below 7.07.0 से नीचे
  3. C.Below 5.65.6 से नीचे✓ Correct
  4. D.Below 6.66.6 से नीचे
Answer: C — Below 5.6
Unpolluted rain water has pH about 5.6 because dissolved CO2 forms weak carbonic acid in it. Oxides of sulphur and nitrogen from burning fossil fuels lower the pH below 5.6, and such rain is called acid rain.अप्रदूषित वर्षा-जल का pH लगभग 5.6 होता है, क्योंकि घुली CO2 उसमें दुर्बल कार्बोनिक अम्ल बनाती है। जीवाश्म ईंधन जलने से बने सल्फर और नाइट्रोजन के ऑक्साइड pH को 5.6 से नीचे ले जाते हैं, और ऐसी वर्षा अम्ल वर्षा कहलाती है।
Q7.General Organic Chemistry

Keto–enol tautomerism is shown mainly by:

कीटो–ईनॉल चलावयवता (tautomerism) मुख्यतः किन यौगिकों द्वारा दर्शाई जाती है:

  1. A.Alkynesऐल्काइन
  2. B.Benzene derivativesबेंज़ीन व्युत्पन्न
  3. C.Alkyl halidesऐल्किल हैलाइड
  4. D.Carbonyl compounds having an α-hydrogenα-हाइड्रोजन युक्त कार्बोनिल यौगिक✓ Correct
Answer: D — Carbonyl compounds having an α-hydrogen
Tautomerism is a special kind of functional isomerism in which two forms (e.g. the keto and enol forms of acetoacetic ester) rapidly interconvert by the shift of a proton, and exist in dynamic equilibrium. A carbonyl carbon bearing an α-hydrogen is needed for keto–enol tautomerism.चलावयवता (tautomerism) क्रियात्मक समावयवता का विशेष प्रकार है, जिसमें दो रूप (जैसे एसीटोएसिटिक एस्टर के कीटो और ईनॉल रूप) प्रोटॉन के स्थानांतरण से तीव्रता से परस्पर बदलते हैं और गतिक साम्य में रहते हैं। कीटो–ईनॉल चलावयवता के लिए α-हाइड्रोजन वाला कार्बोनिल कार्बन आवश्यक है।
Q8.General Organic Chemistry

Ethanol and dimethyl ether (methoxymethane) are related to each other as:

एथेनॉल और डाइमेथिल ईथर (मेथॉक्सीमेथेन) परस्पर हैं:

  1. A.Functional group isomersक्रियात्मक समूह समावयवी✓ Correct
  2. B.Position isomersस्थिति समावयवी (position isomers)
  3. C.Chain isomersशृंखला समावयवी
  4. D.Not isomers at all — the same compoundमध्यावयवी (metamers) ही नहीं, दोनों एक ही यौगिक हैं
Answer: A — Functional group isomers
Ethanol (CH3CH2OH) and methoxymethane (CH3OCH3) share the molecular formula C2H6O but carry different functional groups (–OH versus –O–) and are therefore functional-group isomers.एथेनॉल (CH3CH2OH) और मेथॉक्सीमेथेन (CH3OCH3) दोनों का अणुसूत्र C2H6O है, परंतु उनके क्रियात्मक समूह (–OH बनाम –O–) भिन्न हैं, अतः वे क्रियात्मक-समूह समावयवी हैं।
Q9.States of Matter

On raising the temperature of a liquid, its surface tension:

किसी द्रव का तापमान बढ़ाने पर उसका पृष्ठ तनाव (surface tension):

  1. A.Increasesयह बढ़ता है
  2. B.Remains unchangedयह अपरिवर्तित रहता है
  3. C.Decreasesयह घटता है✓ Correct
  4. D.First increases, then decreasesपहले बढ़ता है, फिर घटता है
Answer: C — Decreases
Surface tension is caused by the net inward pull on surface molecules. Heating weakens intermolecular attractions, so surface tension falls steadily as temperature rises and vanishes at the critical temperature.पृष्ठ तनाव सतह के अणुओं पर लगने वाले कुल आंतरिक खिंचाव से होता है। गर्म करने से अंतराअणुक आकर्षण दुर्बल होता है, अतः तापमान बढ़ने के साथ पृष्ठ तनाव घटता जाता है और क्रांतिक तापमान पर लुप्त हो जाता है।
Q10.Atomic Structure

The charge-to-mass ratio (e/m) of cathode rays was first measured by:

कैथोड किरणों के आवेश-द्रव्यमान अनुपात (e/m) का मापन सबसे पहले किसने किया था:

  1. A.Roentgenरॉन्टजन
  2. B.Rutherfordरदरफोर्ड
  3. C.Millikanमिलिकन
  4. D.J. J. Thomsonजे. जे. थॉमसन✓ Correct
Answer: D — J. J. Thomson
J. J. Thomson measured the charge-to-mass ratio (e/m) of cathode rays in 1897 and showed that the rays consist of a universal particle — the electron. The actual charge on the electron was later measured by Millikan.जे. जे. थॉमसन ने 1897 में कैथोड किरणों का आवेश-द्रव्यमान अनुपात (e/m) मापा और दिखाया कि किरणें एक सार्वभौमिक कण — इलेक्ट्रॉन — से बनी हैं। इलेक्ट्रॉन का वास्तविक आवेश बाद में मिलिकन ने मापा।
Q11.Some Basic Concepts

The number of significant figures in 0.00450 is:

संख्या 0.00450 में सार्थक अंकों (significant figures) की संख्या है:

  1. A.Threeतीन✓ Correct
  2. B.Fiveपाँच
  3. C.Twoदो
  4. D.Fourचार
Answer: A — Three
In 0.00450 the leading zeros are not significant, but the trailing zero after the digit 5 is significant (it shows the precision of the measurement). Hence 4, 5 and the final 0 count — three significant figures.0.00450 में आगे के शून्य सार्थक नहीं हैं, परंतु अंक 5 के बाद का अंतिम शून्य सार्थक है (यह मापन की परिशुद्धता दर्शाता है)। अतः 4, 5 और अंतिम 0 — कुल तीन सार्थक अंक हैं।
Q12.Some Basic Concepts

The law of multiple proportions was proposed by:

गुणित अनुपात का नियम (law of multiple proportions) किसने प्रतिपादित किया था:

  1. A.Gay-Lussacगे-लुसाक
  2. B.Daltonडाल्टन✓ Correct
  3. C.Proustप्राउस्ट
  4. D.Avogadroएवोगाड्रो
Answer: B — Dalton
Dalton proposed the law of multiple proportions (1803): when two elements form more than one compound, the masses of one element combining with a fixed mass of the other stand in a ratio of small whole numbers — as in CO and CO2, where the oxygen masses are in the ratio 1 : 2.डाल्टन ने गुणित अनुपात का नियम (1803) दिया: जब दो तत्व एक से अधिक यौगिक बनाते हैं, तो एक तत्व के निश्चित द्रव्यमान से जुड़ने वाले दूसरे तत्व के द्रव्यमान छोटी पूर्ण संख्याओं के अनुपात में होते हैं — जैसे CO और CO2 में ऑक्सीजन के द्रव्यमानों का अनुपात 1 : 2 है।
Q13.Equilibrium

A buffer solution containing acetic acid (pKa = 4.74) and sodium acetate in equal molar amounts has a pH of:

एसिटिक अम्ल (pKa = 4.74) और सोडियम एसिटेट की बराबर मोलर मात्रा से बनी बफर विलयन का pH है:

  1. A.4.04.0
  2. B.3.743.74
  3. C.5.745.74
  4. D.4.744.74✓ Correct
Answer: D — 4.74
By the Henderson–Hasselbalch equation, pH = pKa + log([salt]/[acid]) = 4.74 + log(1) = 4.74, because the salt and acid are equimolar. Such a mixture is a buffer of maximum capacity.हेंडरसन–हैसलबैक समीकरण से pH = pKa + log([लवण]/[अम्ल]) = 4.74 + log(1) = 4.74, क्योंकि लवण और अम्ल सम-मोलर हैं। ऐसा मिश्रण अधिकतम क्षमता वाला बफर होता है।
Q14.Chemical Kinetics

A first-order reaction has a half-life of 693 s. Its rate constant k is:

किसी प्रथम कोटि अभिक्रिया का अर्ध-आयु काल 693 s है। इसका वेग स्थिरांक k है:

  1. A.1.0 × 10⁻³ s⁻¹1.0 × 10⁻³ s⁻¹✓ Correct
  2. B.1.0 s⁻¹1.0 s⁻¹
  3. C.9.3 × 10⁻² s⁻¹9.3 × 10⁻² s⁻¹
  4. D.1.0 × 10⁻⁴ s⁻¹1.0 × 10⁻⁴ s⁻¹
Answer: A — 1.0 × 10⁻³ s⁻¹
For a first-order reaction, k = 0.693/t1/2 = 0.693/693 s = 1.0 × 10⁻³ s⁻¹.प्रथम कोटि अभिक्रिया के लिए k = 0.693/t1/2 = 0.693/693 s = 1.0 × 10⁻³ s⁻¹।
Q15.Atomic Structure

Isobars are atoms which have:

समभारिक (isobars) वे परमाणु हैं जिनकी:

  1. A.Atomic numbers are equal but mass numbers differपरमाणु संख्या समान, द्रव्यमान संख्या भिन्न
  2. B.Mass numbers are equal but atomic numbers differद्रव्यमान संख्या समान, परमाणु संख्या भिन्न✓ Correct
  3. C.Neutron numbers are equalन्यूट्रॉन संख्या समान
  4. D.Only proton numbers are equalकेवल प्रोटॉन संख्या समान
Answer: B — Mass numbers are equal but atomic numbers differ
Isobars are nuclides of different elements having the same mass number (same total nucleons) but different atomic numbers, e.g. 40Ar and 40Ca. Isotopes share the atomic number; isotones share the neutron number.समभारिक (isobars) विभिन्न तत्वों के वे नाभिक हैं जिनकी द्रव्यमान संख्या (कुल न्यूक्लियॉनों की संख्या) समान परंतु परमाणु संख्या भिन्न होती है, जैसे 40Ar और 40Ca। समस्थानिकों की परमाणु संख्या और समन्यूट्रॉनिकों की न्यूट्रॉन संख्या समान होती है।
Q16.Atomic Structure

The number of electrons in a Na⁺ ion is:

Na⁺ आयन में इलेक्ट्रॉनों की संख्या है:

  1. A.1111
  2. B.1212
  3. C.1010✓ Correct
  4. D.2323
Answer: C — 10
In Na⁺ one electron is removed from the neutral sodium atom (11 electrons) while the nuclear charge stays at 11 protons. Hence Na⁺ has 10 electrons but still 11 protons.Na⁺ में उदासीन सोडियम परमाणु (11 इलेक्ट्रॉन) से एक इलेक्ट्रॉन निकलता है, जबकि नाभिकीय आवेश 11 प्रोटॉन ही रहता है। अतः Na⁺ में 10 इलेक्ट्रॉन परंतु 11 प्रोटॉन होते हैं।
Q17.Periodic Table

The electronegativity of fluorine on the Pauling scale is:

पॉलिंग पैमाने पर फ्लुओरीन की विद्युत-ऋणात्मकता का मान है:

  1. A.4.04.0✓ Correct
  2. B.3.53.5
  3. C.3.03.0
  4. D.5.05.0
Answer: A — 4.0
On the Pauling scale fluorine, the most electronegative element, is assigned the value 4.0; the values for other elements are measured relative to it (oxygen 3.5, chlorine 3.0, hydrogen 2.1 approximately).पॉलिंग पैमाने पर सबसे अधिक विद्युत-ऋणात्मक तत्व फ्लुओरीन को 4.0 मान दिया गया है; अन्य तत्वों के मान इसी के सापेक्ष मापे जाते हैं (ऑक्सीजन 3.5, क्लोरीन 3.0, हाइड्रोजन लगभग 2.1)।
Q18.Chemical Bonding

In general, the stronger bond is:

सामान्यतः अधिक प्रबल बंध है:

  1. A.A π bond than a σ bondπ बंध, σ बंध से
  2. B.Both are equally strongदोनों समान प्रबल हैं
  3. C.A σ bond than a π bondσ बंध, π बंध से✓ Correct
  4. D.It depends only on bond lengthयह बंधों की लंबाई पर निर्भर करता है
Answer: C — A σ bond than a π bond
A σ (sigma) bond is formed by head-on overlap of orbitals along the internuclear axis, which gives extensive overlap; a π bond is formed by weaker sidewise overlap. Hence a σ bond is stronger than a π bond, and a double bond (one σ + one π) is stronger than a single bond but less than twice as strong.σ (सिग्मा) बंध कक्षकों के अंतर्नाभिकीय अक्ष के साथ अग्र-अतिव्यापन से बनता है, जिसमें अतिव्यापन अधिक होता है; π बंध दुर्बल पार्श्व अतिव्यापन से बनता है। अतः σ बंध π बंध से प्रबल होता है, और द्वि-बंध (एक σ + एक π) एकल बंध से प्रबल परंतु उससे दोगुने से कम होता है।
Q19.Chemical Bonding

The H–N–H bond angle in the ammonia (NH3) molecule is approximately:

अमोनिया (NH3) अणु में H–N–H बंध कोण लगभग है:

  1. A.109.5°109.5°
  2. B.107°107°✓ Correct
  3. C.104.5°104.5°
  4. D.120°120°
Answer: B — 107°
In NH3 the nitrogen is sp3 hybridised with one lone pair; repulsion by the lone pair squeezes the H–N–H angle from the tetrahedral 109.5° down to about 107°. (In H2O, two lone pairs squeeze it further, to 104.5°.)NH3 में नाइट्रोजन sp3 संकरित है और एक एकाकी युग्म रखता है; एकाकी युग्म का प्रतिकर्षण H–N–H कोण को चतुष्फलकीय 109.5° से घटाकर लगभग 107° कर देता है। (H2O में दो एकाकी युग्म इसे और घटाकर 104.5° कर देते हैं।)
Q20.States of Matter

A real gas shows maximum deviation from ideal behaviour at:

एक वास्तविक गैस आदर्श व्यवहार से अधिकतम विचलन दर्शाती है:

  1. A.High temperature and low pressureउच्च तापमान और निम्न दाब पर
  2. B.Equally under all conditionsसभी दशाओं में समान रूप से
  3. C.Only at the critical pointकेवल क्रांतिक बिंदु पर
  4. D.Low temperature and high pressureनिम्न तापमान और उच्च दाब पर✓ Correct
Answer: D — Low temperature and high pressure
An ideal gas obeys the gas laws at all temperatures and pressures. A real gas shows maximum deviation from ideal behaviour at low temperature and high pressure, where molecular volume and intermolecular attractions can no longer be neglected.आदर्श गैस सभी तापमानों और दाबों पर गैस नियमों का पालन करती है। वास्तविक गैस निम्न तापमान और उच्च दाब पर आदर्श व्यवहार से अधिकतम विचलन दर्शाती है, जहाँ अणुओं का आयतन और अंतराअणुक आकर्षण उपेक्षित नहीं किए जा सकते।
Q21.Thermodynamics

Which of the following quantities is NOT a state function?

निम्नलिखित में से कौन-सी राशि अवस्था-फलन (state function) नहीं है:

  1. A.Enthalpyएन्थैल्पी
  2. B.Internal energyआंतरिक ऊर्जा
  3. C.Workकार्य✓ Correct
  4. D.Entropyएन्ट्रॉपी
Answer: C — Work
Work (w) and heat (q) depend on the path taken between two states, so they are path functions. Internal energy, enthalpy, entropy and pressure are state functions, fixed by the state of the system alone.कार्य (w) और ऊष्मा (q) दो अवस्थाओं के बीच लिए गए पथ पर निर्भर करते हैं, अतः वे पथ-फलन हैं। आंतरिक ऊर्जा, एन्थैल्पी, एन्ट्रॉपी और दाब अवस्था-फलन हैं, जो केवल तंत्र की अवस्था से निर्धारित होते हैं।
Q22.Thermodynamics

For an isothermal reversible expansion of an ideal gas, which of the following is correct?

आदर्श गैस के समतापी उत्क्रमणीय प्रसार के लिए निम्नलिखित में से कौन-सा सही है:

  1. A.ΔU = 0ΔU = 0✓ Correct
  2. B.q = 0q = 0
  3. C.w = 0w = 0
  4. D.ΔH is infiniteΔH अनंत है
Answer: A — ΔU = 0
In an isothermal process the temperature is constant, and for an ideal gas internal energy depends only on temperature, so ΔU = 0. Any work done by the gas is exactly balanced by heat absorbed.समतापी प्रक्रम में तापमान स्थिर रहता है, और आदर्श गैस की आंतरिक ऊर्जा केवल तापमान पर निर्भर करती है, अतः ΔU = 0। गैस द्वारा किया गया कार्य अवशोषित ऊष्मा से ठीक संतुलित होता है।
Q23.Equilibrium

An inert gas is added at constant pressure to a gaseous reaction mixture already at equilibrium. The effect is that:

पहले से साम्य में स्थित गैसीय अभिक्रिया मिश्रण में स्थिर दाब पर अक्रिय गैस मिलाने का प्रभाव होता है:

  1. A.The equilibrium shifts to the side with fewer moleculesसाम्य कम अणुओं वाले पक्ष की ओर विस्थापित होता है
  2. B.The equilibrium does not shift at allसाम्य बिल्कुल विस्थापित नहीं होता
  3. C.The equilibrium constant K doublesसाम्य स्थिरांक K दोगुना हो जाता है
  4. D.The equilibrium shifts to the side with more moleculesसाम्य अधिक अणुओं वाले पक्ष की ओर विस्थापित होता है✓ Correct
Answer: D — The equilibrium shifts to the side with more molecules
At constant pressure, adding an inert gas increases the volume, so the partial pressures of the reacting gases fall. The equilibrium then shifts toward the side with more gas molecules to restore the pressure. (It is addition at constant volume that leaves the equilibrium unshifted.)स्थिर दाब पर अक्रिय गैस मिलाने से आयतन बढ़ता है, अतः अभिक्रियाकारक गैसों के आंशिक दाब घटते हैं। तब साम्य दाब पुनः स्थापित करने के लिए अधिक गैस-अणुओं वाले पक्ष की ओर विस्थापित होता है। (स्थिर आयतन पर मिलाना ही साम्य को अविस्थापित छोड़ता है।)
Q24.Equilibrium

The value of the ionic product of water, Kw, at 25°C is:

25°C पर जल के आयनिक गुणनफल Kw का मान है:

  1. A.1.0 × 10⁻⁷1.0 × 10⁻⁷
  2. B.1.0 × 10⁻¹⁴1.0 × 10⁻¹⁴✓ Correct
  3. C.1.0 × 10⁻¹⁰1.0 × 10⁻¹⁰
  4. D.00
Answer: B — 1.0 × 10⁻¹⁴
Kw = [H⁺][OH⁻] = 1.0 × 10⁻¹⁴ at 25°C. Neutral water has [H⁺] = [OH⁻] = 10⁻⁷ mol L⁻¹ at this temperature, giving pH 7.25°C पर Kw = [H⁺][OH⁻] = 1.0 × 10⁻¹⁴ होता है। इस तापमान पर उदासीन जल में [H⁺] = [OH⁻] = 10⁻⁷ mol L⁻¹ होता है, जिससे pH 7 मिलता है।
Q25.Redox Reactions

The oxidation number of chromium in CrO5 is:

CrO5 में क्रोमियम की ऑक्सीकरण संख्या है:

  1. A.+10+10
  2. B.+6+6✓ Correct
  3. C.+5+5
  4. D.+4+4
Answer: B — +6
In CrO5 (blue chromium peroxide) four of the five oxygens are peroxide oxygens (−1 each) and one is a normal oxide oxygen (−2). So x + 4(−1) + (−2) = 0 gives x = +6 — chromium stays at its group oxidation state; the naive all-oxide calculation would wrongly give +10.CrO5 (नीला क्रोमियम परॉक्साइड) में पाँच ऑक्सीजनों में से चार परॉक्साइड ऑक्सीजन (−1 प्रत्येक) और एक सामान्य ऑक्साइड ऑक्सीजन (−2) है। अतः x + 4(−1) + (−2) = 0 से x = +6 मिलता है — क्रोमियम अपनी समूह ऑक्सीकरण अवस्था पर ही रहता है; सभी को ऑक्साइड मानने पर गलत +10 आता।
Q26.Redox Reactions

A disproportionation reaction is one in which there is:

विसमानुपातन (disproportionation) अभिक्रिया वह है जिसमें होता है:

  1. A.An exchange of two elementsदो तत्वों का स्थान परिवर्तन
  2. B.Only oxidation of one elementएक तत्व का केवल ऑक्सीकरण
  3. C.Sharing of electrons between elementsतत्वों के बीच इलेक्ट्रॉनों का साझाकरण
  4. D.Simultaneous oxidation and reduction of the same elementएक ही तत्व का एक साथ ऑक्सीकरण और अपचयन✓ Correct
Answer: D — Simultaneous oxidation and reduction of the same element
Disproportionation is a redox reaction in which the same element in one species is simultaneously oxidised and reduced — for example chlorine with cold dilute NaOH gives both chloride (Cl: 0 → −1) and hypochlorite (Cl: 0 → +1).विसमानुपातन (disproportionation) वह रेडॉक्स अभिक्रिया है जिसमें एक ही स्पीशीज़ का एक ही तत्व एक साथ ऑक्सीकृत और अपचित होता है — जैसे ठंडे तनु NaOH से क्लोरीन क्लोराइड (Cl: 0 → −1) और हाइपोक्लोराइट (Cl: 0 → +1) दोनों देती है।
Q27.Electrochemistry

The positive plate (cathode) of a lead storage battery is made of:

सीसा संचायक बैटरी (lead storage battery) की धनात्मक प्लेट (कैथोड) बनी होती है:

  1. A.PbPb
  2. B.PbSO4PbSO4
  3. C.PbO2PbO2✓ Correct
  4. D.PbOPbO
Answer: C — PbO2
In a lead storage battery the negative plate (anode) is spongy lead, the positive plate (cathode) is packed with lead dioxide (PbO2), and the electrolyte is about 38% sulphuric acid. During discharge both plates convert to lead sulphate.सीसा संचायक बैटरी में ऋणात्मक प्लेट (ऐनोड) स्पंजी सीसा और धनात्मक प्लेट (कैथोड) सीसा डाइऑक्साइड (PbO2) से भरी होती है, और विद्युत-अपघट्य लगभग 38% सल्फ्यूरिक अम्ल होता है। निर्वहन (discharge) में दोनों प्लेटें सीसा सल्फेट में बदल जाती हैं।
Q28.Electrochemistry

Kohlrausch's law is mainly used to calculate:

कोलराउश नियम (Kohlrausch's law) मुख्यतः किसकी गणना में प्रयुक्त होता है:

  1. A.The limiting molar conductivity (Λ°) of a weak electrolyteकिसी दुर्बल विद्युत-अपघट्य की सीमांत मोलर चालकता (Λ°)✓ Correct
  2. B.The strength of an electrolyteविद्युत-अपघट्य की सामर्थ्य
  3. C.The EMF of a cellसेल का EMF
  4. D.The mass deposited in electrolysisविद्युत-अपघटन में जमा द्रव्यमान
Answer: A — The limiting molar conductivity (Λ°) of a weak electrolyte
Kohlrausch's law of independent migration of ions lets us calculate the limiting molar conductivity of a weak electrolyte (like acetic acid) — which cannot be measured directly by extrapolation — from the Λ° values of strong electrolytes such as HCl, CH3COONa and NaCl.कोलराउश का आयनों के स्वतंत्र अभिगमन का नियम दुर्बल विद्युत-अपघट्य (जैसे एसिटिक अम्ल) की सीमांत मोलर चालकता ज्ञात करने देता है — जिसे बहिर्वेशन से सीधे नहीं मापा जा सकता — HCl, CH3COONa और NaCl जैसे प्रबल विद्युत-अपघट्यों के Λ° मानों से।
Q29.Chemical Kinetics

A reaction whose rate law is rate = k[A]²[B] has an overall order of:

जिस अभिक्रिया का वेग-नियम वेग = k[A]²[B] है, उसकी समग्र कोटि (overall order) है:

  1. A.22
  2. B.11
  3. C.55
  4. D.33✓ Correct
Answer: D — 3
The overall order is the sum of the powers of the concentration terms in the rate law: 2 (for A) + 1 (for B) = 3. Order is an experimental quantity and need not equal the stoichiometric coefficients of the balanced equation.समग्र कोटि वेग-नियम में सांद्रता पदों की घातों का योग होती है: 2 (A के लिए) + 1 (B के लिए) = 3। कोटि एक प्रायोगिक राशि है और संतुलित समीकरण के स्टॉइकियोमितीय गुणांकों के बराबर होना आवश्यक नहीं है।
Q30.Chemical Kinetics

The unit of the rate constant for a first-order reaction is:

प्रथम कोटि अभिक्रिया के वेग स्थिरांक की इकाई है:

  1. A.mol L⁻¹ s⁻¹mol L⁻¹ s⁻¹
  2. B.s⁻¹s⁻¹✓ Correct
  3. C.L mol⁻¹ s⁻¹L mol⁻¹ s⁻¹
  4. D.Dimensionlessमात्रकहीन
Answer: B — s⁻¹
From the Arrhenius relation k ∝ e^(−Ea/RT), the unit of k must match the unit of rate divided by concentration terms; for a first-order reaction rate/concentration = (mol L⁻¹ s⁻¹)/(mol L⁻¹) = s⁻¹. Only first-order rate constants are measured in s⁻¹.आरेनियस संबंध k ∝ e^(−Ea/RT) से, k की इकाई वेग को सांद्रता पदों से भाग देने से मिलती है; प्रथम कोटि अभिक्रिया के लिए वेग/सांद्रता = (mol L⁻¹ s⁻¹)/(mol L⁻¹) = s⁻¹। केवल प्रथम कोटि के वेग स्थिरांक s⁻¹ में मापे जाते हैं।
Q31.Chemical Kinetics

According to collision theory, a collision between molecules is effective (fruitful) only when:

संघट्ट सिद्धांत (collision theory) के अनुसार अणुओं के बीच प्रभावी संघट्ट तभी होता है जब:

  1. A.The molecules possess at least the activation energy and collide with proper orientationजब अणुओं के पास न्यूनतम सक्रियण ऊर्जा हो और अभिविन्यास सही हो✓ Correct
  2. B.The collision is perfectly elasticजब टक्कर पूर्णतः प्रत्यास्थ हो
  3. C.The collision takes place at slow speedजब टक्कर धीमी गति से हो
  4. D.The temperature is above the critical temperatureजब तापमान क्रांतिक तापमान से ऊपर हो
Answer: A — The molecules possess at least the activation energy and collide with proper orientation
On colliding, molecules react only if they possess energy at least equal to the activation energy AND approach in a suitable orientation. Most collisions fail on one of these two counts, which is why the actual rate is far below the raw collision rate.टकराने पर अणु तभी अभिक्रिया करते हैं जब उनके पास कम-से-कम सक्रियण ऊर्जा के बराबर ऊर्जा हो और वे उपयुक्त अभिविन्यास में आएँ। अधिकांश टक्करें इनमें से किसी एक शर्त पर असफल होती हैं, इसीलिए वास्तविक वेग कच्ची टक्कर-दर से बहुत कम होता है।
Q32.Solutions

An azeotrope is:

एज़ियोट्रोप (स्थिरक्वाथी मिश्रण) है:

  1. A.A mixture obtained by mixing two liquids in any ratioदो द्रवों को हर अनुपात में मिलाकर बना मिश्रण
  2. B.Only an ideal solutionकेवल आदर्श विलयन
  3. C.A mixture of definite composition that boils unchanged at a constant temperatureनिश्चित संघटन वाला वह मिश्रण जो स्थिर तापमान पर अपरिवर्तित उबलता है✓ Correct
  4. D.Only a maximum-boiling mixtureअधिकतम क्वथनांक वाला केवल वही मिश्रण
Answer: C — A mixture of definite composition that boils unchanged at a constant temperature
An azeotrope is a binary liquid mixture of definite composition which boils at a constant temperature and distils unchanged, exactly like a pure liquid — e.g. the 95.6% ethanol–water mixture. Ordinary fractional distillation cannot separate it further.एज़ियोट्रोप निश्चित संघटन वाला द्विअंगी द्रव मिश्रण है, जो स्थिर तापमान पर उबलता है और शुद्ध द्रव की भाँति अपरिवर्तित आसवित होता है — जैसे 95.6% एथेनॉल–जल मिश्रण। साधारण प्रभाजी आसवन से इसे आगे पृथक नहीं किया जा सकता।
Q33.Solutions

Reverse osmosis is chiefly used for:

प्रतिलोम परासरण (reverse osmosis) का प्रमुख उपयोग है:

  1. A.Obtaining pure water from sea water (desalination)समुद्री जल से शुद्ध जल प्राप्त करना (विलवणीकरण)✓ Correct
  2. B.Measuring the osmotic pressure of solutionsविलयनों का परासरण दाब मापना
  3. C.Separating blood cellsरक्त कोशिकाओं को अलग करना
  4. D.Storing rain waterवर्षा-जल को संग्रहीत करना
Answer: A — Obtaining pure water from sea water (desalination)
In reverse osmosis a pressure greater than the osmotic pressure is applied on the solution side of a semipermeable membrane, forcing pure solvent out of the solution. It is used on a large scale to desalinate sea water.प्रतिलोम परासरण में अर्धपारगम्य झिल्ली के विलयन-पक्ष पर परासरण दाब से अधिक दाब लगाया जाता है, जिससे शुद्ध विलायक विलयन से बाहर निकलता है। इसका बड़े पैमाने पर उपयोग समुद्री जल के विलवणीकरण में होता है।
Q34.Solid State

Amorphous solids are:

अक्रिस्टलीय (amorphous) ठोस होते हैं:

  1. A.Anisotropicविषमदैशिक (anisotropic)
  2. B.Completely transparentबिल्कुल पारदर्शी
  3. C.Strongly electrically conductingप्रबल विद्युत-चालक
  4. D.Isotropicसमदैशिक (isotropic)✓ Correct
Answer: D — Isotropic
Amorphous solids have only short-range order, so their properties (refractive index, thermal expansion) are the same in all directions — they are isotropic. Crystalline solids are anisotropic because their internal arrangement differs along different directions.अक्रिस्टलीय ठोसों में केवल लघु-परासी व्यवस्था होती है, अतः उनके गुण (अपवर्तनांक, तापीय प्रसार) सभी दिशाओं में समान होते हैं — वे समदैशिक हैं। क्रिस्टलीय ठोस विषमदैशिक होते हैं क्योंकि उनकी आंतरिक व्यवस्था विभिन्न दिशाओं में भिन्न होती है।
Q35.Solid State

The coordination number of each Na⁺ ion in the NaCl crystal (rock-salt structure) is:

NaCl क्रिस्टल (सेंधा नमक संरचना) में प्रत्येक Na⁺ आयन की उपसहसंयोजन संख्या (coordination number) है:

  1. A.44
  2. B.66✓ Correct
  3. C.88
  4. D.1212
Answer: B — 6
Rock salt has a face-centred cubic arrangement in which each Na⁺ is surrounded octahedrally by 6 Cl⁻ ions, and each Cl⁻ likewise by 6 Na⁺ ions — so the coordination number is 6 for both ions.सेंधा नमक में फलक-केन्द्रित घनीय व्यवस्था होती है, जिसमें प्रत्येक Na⁺ अष्टफलकीय रूप से 6 Cl⁻ आयनों से और प्रत्येक Cl⁻ भी 6 Na⁺ आयनों से घिरा होता है — अतः दोनों आयनों की उपसहसंयोजन संख्या 6 है।
Q36.Surface Chemistry

The process used to purify a colloidal solution of soluble crystalloid impurities (like ions and sugar) is called:

कोलॉइडी विलयन को विलेय क्रिस्टलॉइड अशुद्धियों (जैसे आयन और चीनी) से शुद्ध करने की प्रक्रिया कहलाती है:

  1. A.Centrifugationअपकेन्द्रण (centrifugation)
  2. B.Electrophoresisविद्युतकण संचलन (electrophoresis)
  3. C.Dialysisअपोहन (dialysis)✓ Correct
  4. D.Coagulationस्कंदन (coagulation)
Answer: C — Dialysis
Colloidal (impure) solutions are purified by dialysis: the colloidal particles cannot pass through a parchment membrane, whereas the dissolved ions and small molecules diffuse out into the surrounding pure water.कोलॉइडी (अशुद्ध) विलयनों का शुद्धिकरण अपोहन (dialysis) द्वारा होता है: कोलॉइडी कण चर्म-पत्र झिल्ली से पार नहीं हो पाते, जबकि घुले आयन और छोटे अणु बाहर के शुद्ध जल में विसरित हो जाते हैं।
Q37.Metallurgy

The refining method used to separate a low-melting metal like tin from its higher-melting impurities is:

कम गलनांक वाली धातु जैसे टिन को अधिक गलनांक वाली अशुद्धियों से अलग करने के लिए प्रयुक्त शोधन विधि है:

  1. A.Zone refiningक्षेत्र शोधन (zone refining)
  2. B.van Arkel methodवैन आर्केल विधि
  3. C.Liquationद्रवगलन (liquation)✓ Correct
  4. D.Electrolytic refiningविद्युत-अपघटनी शोधन
Answer: C — Liquation
In liquation, the ore is heated on a sloping hearth; the low-melting metal (e.g. tin) melts and flows down, leaving behind the higher-melting impurities. It works only for metals with a low melting point.द्रवगलन (liquation) में अयस्क को ढलानदार चूल्हे पर गर्म करते हैं; कम गलनांक वाली धातु (जैसे टिन) पिघलकर नीचे बह जाती है और अधिक गलनांक वाली अशुद्धियाँ पीछे रह जाती हैं। यह केवल कम गलनांक वाली धातुओं के लिए काम करता है।
Q38.Metallurgy

The refining technique used to obtain ultra-pure, semiconductor-grade silicon and germanium is:

अर्धचालक-श्रेणी की अतिशुद्ध सिलिकॉन और जर्मेनियम प्राप्त करने के लिए प्रयुक्त शोधन विधि है:

  1. A.Mond processमॉन्ड प्रक्रम
  2. B.Zone refiningक्षेत्र शोधन (zone refining)✓ Correct
  3. C.Magnetic separationचुंबकीय पृथक्करण
  4. D.Froth flotationझाग प्लवन विधि
Answer: B — Zone refining
Zone refining is based on the fact that impurities are more soluble in the molten zone than in the solid metal, so a repeatedly moving molten zone carries the impurities to one end. It gives the ultra-pure silicon and germanium needed for semiconductors.क्षेत्र शोधन (zone refining) इस तथ्य पर आधारित है कि अशुद्धियाँ ठोस धातु की अपेक्षा गलित क्षेत्र में अधिक विलेय होती हैं, अतः बार-बार गतिमान गलित क्षेत्र अशुद्धियों को एक सिरे पर ले जाता है। इससे अर्धचालकों के लिए आवश्यक अतिशुद्ध सिलिकॉन और जर्मेनियम मिलता है।
Q39.s-Block Elements

The chemical formula of Epsom salt is:

एप्सम लवण (Epsom salt) का रासायनिक सूत्र है:

  1. A.MgSO4·H2OMgSO4·H2O
  2. B.CaSO4·7H2OCaSO4·7H2O
  3. C.MgCl2·6H2OMgCl2·6H2O
  4. D.MgSO4·7H2OMgSO4·7H2O✓ Correct
Answer: D — MgSO4·7H2O
Epsom salt is magnesium sulphate heptahydrate, MgSO4·7H2O, used as a mild laxative and in bath salts. Gypsum is the corresponding calcium salt, CaSO4·2H2O.एप्सम लवण मैग्नीशियम सल्फेट हेप्टाहाइड्रेट, MgSO4·7H2O, है, जिसका उपयोग हलके विरेचक और स्नान-लवण के रूप में होता है। जिप्सम इसका संगत कैल्सियम लवण, CaSO4·2H2O, है।
Q40.s-Block Elements

The products obtained on electrolysing brine in the chlor-alkali process are:

क्लोर-क्षार (chlor-alkali) प्रक्रम में लवण-जल (brine) के विद्युत-अपघटन से प्राप्त उत्पाद हैं:

  1. A.NaOH, Cl2 and H2NaOH, Cl2 और H2✓ Correct
  2. B.Na, Cl2 and NaClONa, Cl2 और NaClO
  3. C.Na2CO3, Cl2 and H2Na2CO3, Cl2 और H2
  4. D.Only NaOH and Cl2केवल NaOH और Cl2
Answer: A — NaOH, Cl2 and H2
In the chlor-alkali process, electrolysis of concentrated brine simultaneously yields three valuable products: sodium hydroxide, chlorine (at the anode) and hydrogen (at the cathode).क्लोर-क्षार प्रक्रम में सांद्र लवण-जल (brine) के विद्युत-अपघटन से एक साथ तीन मूल्यवान उत्पाद मिलते हैं: सोडियम हाइड्रॉक्साइड, क्लोरीन (ऐनोड पर) और हाइड्रोजन (कैथोड पर)।
▶ Play this set online — free, with timer, score & rank
← Set 7All BPSC TRE practice setsSet 9 →BPSC TRE exam guide →

Get daily exam updates on Telegram

Join the SarkariManzil channel — new jobs, results, admit cards and daily current affairs, first on Telegram. Free.

Join SarkariManzil on Telegram ↗