By Archit Kumar · Published: 18 October 2026 · 40 questions · English + हिंदी
BPSC TRE marking rule: +1 for a correct answer, −1/3 for a wrong answer and −1/3 for a question left blank. In the online test, choose option E (Do not attempt) to skip a question safely at 0 marks — never leave a question blank.
Read all 40 questions below with answers and explanations, or play the set online in the SarkariManzil practice app. In the app, sets unlock in order — submit Set N to open Set N+1.
Q1.Some Basic Concepts
A compound contains 40.0% carbon, 6.7% hydrogen and 53.3% oxygen by mass. Its empirical formula is:
एक यौगिक में द्रव्यमान के अनुसार 40.0% कार्बन, 6.7% हाइड्रोजन और 53.3% ऑक्सीजन है। इसका मूलानुपाती (empirical) सूत्र है:
A.CH2OCH2O✓ Correct
B.CHOCHO
C.C2H4O2C2H4O2
D.CH4OCH4O
Answer: A — CH2O Moles per 100 g: C = 40/12 = 3.33, H = 6.7/1 = 6.7, O = 53.3/16 = 3.33. The ratio C : H : O = 1 : 2 : 1, so the empirical formula is CH2O.100 g में मोल: C = 40/12 = 3.33, H = 6.7/1 = 6.7, O = 53.3/16 = 3.33। अनुपात C : H : O = 1 : 2 : 1 है, अतः मूलानुपाती सूत्र CH2O है।
Q2.Atomic Structure
Isotones are atoms of different elements which have the same number of:
समन्यूट्रॉनिक (isotones) विभिन्न तत्वों के वे परमाणु हैं जिनमें समान संख्या होती है:
A.Protonsप्रोटॉनों की
B.Neutronsन्यूट्रॉनों की✓ Correct
C.Electronsइलेक्ट्रॉनों की
D.Nucleonsन्यूक्लियॉनों की
Answer: B — Neutrons Isotones have the same number of neutrons but different numbers of protons, e.g. 14C and 15N each have 8 neutrons. Isotopes share protons; isobars share nucleons (mass number).समन्यूट्रॉनिकों में न्यूट्रॉनों की संख्या समान होती है, परंतु प्रोटॉन भिन्न होते हैं — जैसे 14C और 15N दोनों में 8 न्यूट्रॉन हैं। समस्थानिकों में प्रोटॉन समान होते हैं; समभारिकों में न्यूक्लियॉन (द्रव्यमान संख्या) समान होते हैं।
Q3.Atomic Structure
The number of neutrons present in a nucleus of uranium-235 (atomic number 92) is:
यूरेनियम-235 (परमाणु संख्या 92) के नाभिक में न्यूट्रॉनों की संख्या है:
A.235235
B.9292
C.143143✓ Correct
D.327327
Answer: C — 143 Number of neutrons = mass number − atomic number = 235 − 92 = 143.न्यूट्रॉनों की संख्या = द्रव्यमान संख्या − परमाणु संख्या = 235 − 92 = 143।
Q4.Atomic Structure
The element whose atom has the ground-state electronic configuration [Ar] 3d10 4s1 is:
जिस तत्व के परमाणु का मूल अवस्था इलेक्ट्रॉनिक विन्यास [Ar] 3d10 4s1 है, वह है:
A.Zincजस्ता (Zinc)
B.Nickelनिकेल (Nickel)
C.Ironलोहा (Iron)
D.Copperताँबा (Copper)✓ Correct
Answer: D — Copper The configuration holds 18 + 10 + 1 = 29 electrons, which is copper (Z = 29). Copper is an exception to the expected 3d9 4s2 arrangement because a completely filled d-subshell is especially stable.इस विन्यास में 18 + 10 + 1 = 29 इलेक्ट्रॉन हैं, जो ताँबा (Z = 29) है। ताँबा अपेक्षित 3d9 4s2 विन्यास का अपवाद है क्योंकि पूर्ण भरा d-उपकोश विशेष रूप से स्थायी होता है।
Q5.Periodic Table
Among the following elements, the one with the largest atomic radius is:
निम्नलिखित तत्वों में से सबसे बड़ी परमाणु त्रिज्या वाला तत्व है:
A.Aluminiumएल्युमिनियम
B.Sodiumसोडियम✓ Correct
C.Magnesiumमैग्नीशियम
D.Siliconसिलिकॉन
Answer: B — Sodium Na, Mg, Al and Si lie in the same period (period 3). Atomic radius decreases across a period as the effective nuclear charge rises, so sodium, the leftmost of the four, has the largest atomic radius.Na, Mg, Al और Si एक ही आवर्त (आवर्त 3) में हैं। आवर्त में बाएँ से दाएँ प्रभावी नाभिकीय आवेश बढ़ने से परमाणु त्रिज्या घटती है, अतः सबसे बाएँ स्थित सोडियम की परमाणु त्रिज्या सबसे बड़ी है।
Q6.Chemical Bonding
The shape of the water (H2O) molecule is:
जल (H2O) अणु की आकृति है:
A.Linearरैखिक
B.Trigonal planarत्रिकोणीय समतलीय
C.Bent (angular)मुड़ी हुई (कोणीय)✓ Correct
D.Tetrahedralचतुष्फलकीय
Answer: C — Bent (angular) Oxygen in water is sp3 hybridised with two bond pairs and two lone pairs. The electron-pair geometry is tetrahedral, but the molecular shape, fixed by the atoms alone, is bent (angular) with a bond angle of about 104.5°.जल में ऑक्सीजन sp3 संकरित है, जिसमें दो बंध-युग्म और दो एकाकी युग्म हैं। इलेक्ट्रॉन-युग्म ज्यामिति चतुष्फलकीय है, परंतु केवल परमाणुओं से तय अणु-आकृति मुड़ी हुई (कोणीय) है, जिसका बंध कोण लगभग 104.5° है।
Q7.States of Matter
A mixture of gases contains nitrogen at a partial pressure of 0.76 atm and oxygen at 0.24 atm. By Dalton's law, the total pressure of the mixture is:
गैसों के एक मिश्रण में नाइट्रोजन का आंशिक दाब 0.76 atm और ऑक्सीजन का 0.24 atm है। डाल्टन के नियम से मिश्रण का कुल दाब है:
A.0.52 atm0.52 atm
B.0.18 atm0.18 atm
C.3.17 atm3.17 atm
D.1.00 atm1.00 atm✓ Correct
Answer: D — 1.00 atm By Dalton's law of partial pressures, the total pressure is the sum of the partial pressures: 0.76 + 0.24 = 1.00 atm.डाल्टन के आंशिक दाब नियम के अनुसार कुल दाब आंशिक दाबों का योग होता है: 0.76 + 0.24 = 1.00 atm।
Q8.Thermodynamics
For an adiabatic process, which of the following is true?
रुद्धोष्म (adiabatic) प्रक्रम के लिए निम्नलिखित में से कौन-सा सत्य है?
A.q = 0q = 0✓ Correct
B.ΔT = 0ΔT = 0
C.ΔU = 0ΔU = 0
D.w = 0w = 0
Answer: A — q = 0 An adiabatic process is one in which no heat is exchanged with the surroundings, so q = 0 and any work done changes the internal energy (ΔU = w). ΔT = 0 describes an isothermal process instead.रुद्धोष्म प्रक्रम में परिवेश से ऊष्मा का आदान-प्रदान नहीं होता, अतः q = 0 होता है और किया गया कार्य आंतरिक ऊर्जा बदलता है (ΔU = w)। ΔT = 0 समतापी प्रक्रम को दर्शाता है।
Q9.Thermodynamics
For a reaction, ΔH = −100 kJ mol⁻¹ and ΔS = −200 J K⁻¹ mol⁻¹. The value of ΔG at 300 K is:
किसी अभिक्रिया के लिए ΔH = −100 kJ mol⁻¹ और ΔS = −200 J K⁻¹ mol⁻¹ है। 300 K पर ΔG का मान है:
A.−160 kJ mol⁻¹−160 kJ mol⁻¹
B.+40 kJ mol⁻¹+40 kJ mol⁻¹
C.−40 kJ mol⁻¹−40 kJ mol⁻¹✓ Correct
D.−100 kJ mol⁻¹−100 kJ mol⁻¹
Answer: C — −40 kJ mol⁻¹ ΔG = ΔH − TΔS = −100 − 300 × (−0.200) = −100 + 60 = −40 kJ mol⁻¹. The negative sign shows the reaction is spontaneous at 300 K.ΔG = ΔH − TΔS = −100 − 300 × (−0.200) = −100 + 60 = −40 kJ mol⁻¹। ऋणात्मक चिह्न दर्शाता है कि 300 K पर अभिक्रिया स्वतःप्रवर्ती है।
Q10.Equilibrium
Which of the following changes will NOT shift the position of a gaseous equilibrium already established in a closed vessel?
निम्नलिखित में से कौन-सा परिवर्तन बंद पात्र में पहले से स्थापित गैसीय साम्य की स्थिति को विस्थापित नहीं करेगा?
A.Changing the temperatureतापमान बदलना
B.Removing a product as it formsउत्पाद बनते ही उसे हटाते रहना
C.Changing the pressure by changing the volumeआयतन बदलकर दाब बदलना
D.Adding a catalystउत्प्रेरक मिलाना✓ Correct
Answer: D — Adding a catalyst A catalyst speeds up the forward and backward reactions equally, so equilibrium is reached faster but its position — and the value of K — does not change. Temperature, pressure (volume) changes and removing a product all shift the equilibrium position.उत्प्रेरक अग्र और पश्च दोनों अभिक्रियाओं को समान रूप से तेज़ करता है, इसलिए साम्य जल्दी स्थापित होता है, परंतु उसकी स्थिति — और K का मान — नहीं बदलती। तापमान, दाब (आयतन) में परिवर्तन और उत्पाद हटाना साम्य स्थिति को विस्थापित करते हैं।
Q11.Equilibrium
The solubility product expression for barium sulphate, BaSO4(s) ⇌ Ba²⁺(aq) + SO4²⁻(aq), is:
बेरियम सल्फेट, BaSO4(s) ⇌ Ba²⁺(aq) + SO4²⁻(aq), के लिए विलेयता गुणनफल का व्यंजक है:
Answer: A — Ksp = [Ba²⁺] [SO4²⁻] For a 1 : 1 salt dissolving into one cation and one anion, Ksp is the product of the two ion concentrations, each raised to the power 1: Ksp = [Ba²⁺][SO4²⁻]. The solid itself does not appear in the expression.एक धनायन और एक ऋणायन देने वाले 1 : 1 लवण के लिए Ksp दोनों आयनों की सांद्रताओं का गुणनफल होता है, प्रत्येक की घात 1: Ksp = [Ba²⁺][SO4²⁻]। ठोस स्वयं व्यंजक में नहीं आता।
Q12.Redox Reactions
The oxidation number of carbon in methane (CH4) is:
मीथेन (CH4) में कार्बन की ऑक्सीकरण संख्या है:
A.+4+4
B.−4−4✓ Correct
C.00
D.−2−2
Answer: B — −4 Hydrogen has oxidation number +1. For the neutral molecule CH4: x + 4(+1) = 0, so x = −4. Carbon is assigned a negative value here because it is more electronegative than hydrogen.हाइड्रोजन की ऑक्सीकरण संख्या +1 होती है। उदासीन अणु CH4 के लिए: x + 4(+1) = 0, अतः x = −4। यहाँ कार्बन को ऋणात्मक मान मिलता है क्योंकि वह हाइड्रोजन से अधिक विद्युत-ऋणात्मक है।
Q13.Redox Reactions
In the reaction Zn(s) + CuSO4(aq) → ZnSO4(aq) + Cu(s), the reducing agent is:
Answer: D — Zn Zinc is oxidised (Zn → Zn²⁺ + 2e⁻) and so reduces Cu²⁺ to Cu. The species that itself gets oxidised is the reducing agent — here, zinc. CuSO4 is the oxidising agent.जस्ता ऑक्सीकृत होता है (Zn → Zn²⁺ + 2e⁻) और इस प्रकार Cu²⁺ को Cu में अपचित करता है। जो स्पीशीज़ स्वयं ऑक्सीकृत होती है वही अपचायक होती है — यहाँ जस्ता। CuSO4 ऑक्सीकारक है।
Q14.Electrochemistry
Given E°(Mg²⁺/Mg) = −2.37 V and E°(Ag⁺/Ag) = +0.80 V, the standard EMF of the cell Mg | Mg²⁺ || Ag⁺ | Ag is:
E°(Mg²⁺/Mg) = −2.37 V और E°(Ag⁺/Ag) = +0.80 V दिया गया है। सेल Mg | Mg²⁺ || Ag⁺ | Ag का मानक विद्युत वाहक बल (EMF) है:
A.3.17 V3.17 V✓ Correct
B.1.57 V1.57 V
C.−3.17 V−3.17 V
D.−1.57 V−1.57 V
Answer: A — 3.17 V E°cell = E°cathode − E°anode = 0.80 − (−2.37) = 3.17 V. Silver ions are reduced at the cathode and magnesium is oxidised at the anode, giving a positive, feasible EMF.E°cell = E°कैथोड − E°ऐनोड = 0.80 − (−2.37) = 3.17 V। कैथोड पर सिल्वर आयन अपचित होते हैं और ऐनोड पर मैग्नीशियम ऑक्सीकृत होता है, जिससे धनात्मक, संभव EMF मिलता है।
Q15.Electrochemistry
During the electrolysis of molten (fused) sodium chloride, the product obtained at the cathode is:
पिघले हुए (गलित) सोडियम क्लोराइड के विद्युत-अपघटन में कैथोड पर प्राप्त उत्पाद है:
A.Hydrogen gasहाइड्रोजन गैस
B.Sodium metalसोडियम धातु✓ Correct
C.Chlorine gasक्लोरीन गैस
D.Sodium hydroxideसोडियम हाइड्रॉक्साइड
Answer: B — Sodium metal In molten NaCl the only cation present is Na⁺, which is reduced at the cathode to sodium metal. Chlorine is liberated at the anode. (In aqueous NaCl, water is reduced instead, giving hydrogen at the cathode.)गलित NaCl में एकमात्र धनायन Na⁺ होता है, जो कैथोड पर अपचित होकर सोडियम धातु देता है। ऐनोड पर क्लोरीन मुक्त होती है। (जलीय NaCl में जल अपचित होता है, इसलिए कैथोड पर हाइड्रोजन मिलती है।)
Q16.Chemical Kinetics
The SI unit of the rate of a chemical reaction is:
रासायनिक अभिक्रिया के वेग (rate) की SI इकाई है:
A.s⁻¹s⁻¹
B.L mol⁻¹ s⁻¹L mol⁻¹ s⁻¹
C.mol L⁻¹ s⁻¹mol L⁻¹ s⁻¹✓ Correct
D.mol s⁻¹ onlyकेवल mol s⁻¹
Answer: C — mol L⁻¹ s⁻¹ Rate is the change of concentration per unit time, so its unit is concentration ÷ time = mol L⁻¹ s⁻¹ (equivalently mol dm⁻³ s⁻¹). The units s⁻¹ and L mol⁻¹ s⁻¹ belong to rate constants of first- and second-order reactions.वेग प्रति इकाई समय में सांद्रता का परिवर्तन है, अतः इसकी इकाई सांद्रता ÷ समय = mol L⁻¹ s⁻¹ है। s⁻¹ और L mol⁻¹ s⁻¹ क्रमशः प्रथम और द्वितीय कोटि के वेग स्थिरांकों की इकाइयाँ हैं।
Q17.Chemical Kinetics
The half-life period of a zero-order reaction depends on:
शून्य कोटि अभिक्रिया का अर्ध-आयु काल निर्भर करता है:
A.The initial concentration of the reactantअभिकारक की प्रारंभिक सांद्रता पर✓ Correct
B.Nothing — it is constant for all concentrationsकिसी पर नहीं — वह सभी सांद्रताओं के लिए स्थिर होता है
C.Only the temperatureकेवल तापमान पर
D.Only the catalyst usedकेवल प्रयुक्त उत्प्रेरक पर
Answer: A — The initial concentration of the reactant For a zero-order reaction, t1/2 = [R]0 / 2k, so the half-life is directly proportional to the initial concentration. It is the first-order half-life that is independent of the initial concentration.शून्य कोटि अभिक्रिया के लिए t1/2 = [R]0 / 2k होता है, अतः अर्ध-आयु प्रारंभिक सांद्रता के अनुक्रमानुपाती होती है। प्रथम कोटि की अर्ध-आयु ही प्रारंभिक सांद्रता से स्वतंत्र होती है।
Q18.Solutions
The unit of the molal elevation constant (Kb) is:
मोलल उन्नयन स्थिरांक (Kb) की इकाई है:
A.K mol⁻¹K mol⁻¹
B.K kg⁻¹K kg⁻¹
C.K kg mol⁻¹K kg mol⁻¹✓ Correct
D.It is unitlessयह इकाई-रहित है
Answer: C — K kg mol⁻¹ From ΔTb = Kb × m, Kb = ΔTb / m; with ΔTb in kelvin and molality in mol kg⁻¹, the unit of Kb is K kg mol⁻¹.ΔTb = Kb × m से Kb = ΔTb / m; ΔTb केल्विन में और मोललता mol kg⁻¹ में होने पर Kb की इकाई K kg mol⁻¹ होती है।
Q19.Solutions
Two solutions having the same osmotic pressure at a given temperature are called:
किसी दिए गए तापमान पर समान परासरण दाब वाले दो विलयन कहलाते हैं:
Answer: B — Isotonic solutions Solutions with equal osmotic pressure are isotonic: no net flow of solvent occurs across a semipermeable membrane placed between them. A solution of higher osmotic pressure is hypertonic; of lower, hypotonic.समान परासरण दाब वाले विलयन समपरासारी होते हैं: उनके बीच अर्धपारगम्य झिल्ली रखने पर विलायक का कोई शुद्ध प्रवाह नहीं होता। अधिक परासरण दाब वाला अतिपरासारी और कम वाला अल्पपरासारी कहलाता है।
Q20.Solid State
The Frenkel defect is commonly shown by crystals of:
फ्रेंकल दोष सामान्यतः किन क्रिस्टलों द्वारा दर्शाया जाता है:
A.NaClNaCl
B.CsClCsCl
C.KClKCl
D.AgClAgCl✓ Correct
Answer: D — AgCl The Frenkel defect occurs when a small cation leaves its site and occupies an interstitial position; it is favoured where the cation is much smaller than the anion and the coordination number is low — as in AgCl, AgBr and ZnS. NaCl and KCl show the Schottky defect instead.फ्रेंकल दोष तब होता है जब छोटा धनायन अपना स्थान छोड़कर अंतराकाशी स्थान ग्रहण कर लेता है; यह वहाँ संभव है जहाँ धनायन ऋणायन से बहुत छोटा हो और उपसहसंयोजन संख्या कम हो — जैसे AgCl, AgBr और ZnS में। NaCl और KCl इसके बजाय शॉटकी दोष दर्शाते हैं।
Q21.Solid State
The packing efficiency of a body-centred cubic (bcc) lattice is:
अंतःकेन्द्रित घनीय (bcc) जालक की संकुलन क्षमता (packing efficiency) है:
A.74%74%
B.52.4%52.4%
C.68%68%✓ Correct
D.60%60%
Answer: C — 68% For close packing of equal spheres, the packing efficiency is 74% for ccp/hcp, 68% for bcc and 52.4% for a simple cubic lattice. The 68% figure belongs to the bcc arrangement.समान गोलों के निविड संकुलन में संकुलन क्षमता ccp/hcp के लिए 74%, bcc के लिए 68% और सरल घनीय जालक के लिए 52.4% होती है। 68% का मान bcc व्यवस्था का है।
Q22.Surface Chemistry
A characteristic feature of chemisorption (chemical adsorption) is that it:
रसायन-अधिशोषण (chemisorption) की एक विशिष्ट विशेषता है:
A.It is highly specific and usually irreversibleयह अत्यधिक विशिष्ट और प्रायः अनुत्क्रमणीय होता है✓ Correct
B.It is multilayeredयह बहु-परतीय होता है
C.It arises from weak van der Waals forcesयह दुर्बल van der Waals बलों से होता है
D.It increases markedly at low temperatureयह प्रायः कम तापमान पर बढ़ता है
Answer: A — It is highly specific and usually irreversible Chemisorption involves the formation of chemical bonds with the surface, is highly specific, largely irreversible and usually forms only a monolayer. Physical adsorption is a weak van der Waals, multilayer and readily reversible process.रसायन-अधिशोषण में सतह से रासायनिक बंध बनते हैं; यह अत्यधिक विशिष्ट, प्रायः अनुत्क्रमणीय होता है और प्रायः केवल एकाणुक परत बनाता है। भौतिक अधिशोषण दुर्बल van der Waals बलों वाला, बहु-परतीय और आसानी से उत्क्रमणीय प्रक्रम है।
Q23.Metallurgy
The chemical composition of the ore bauxite is:
अयस्क बॉक्साइट का रासायनिक संघटन है:
A.Fe2O3·xH2OFe2O3·xH2O
B.CuFeS2CuFeS2
C.ZnCO3ZnCO3
D.Al2O3·2H2OAl2O3·2H2O✓ Correct
Answer: D — Al2O3·2H2O Bauxite is the chief ore of aluminium, with the composition Al2O3·2H2O (a hydrated alumina). It is purified by Baeyer's / Hall's process before electrolysis of alumina.बॉक्साइट एल्युमिनियम का मुख्य अयस्क है, जिसका संघटन Al2O3·2H2O (जलयोजित एल्युमिना) है। एल्युमिना के विद्युत-अपघटन से पहले इसे बेयर / हॉल विधि से शुद्ध किया जाता है।
Q24.s-Block Elements
The chemical formula of washing soda is:
धावन सोडे (washing soda) का रासायनिक सूत्र है:
A.NaHCO3NaHCO3
B.Na2CO3·10H2ONa2CO3·10H2O✓ Correct
C.Na2CO3·H2ONa2CO3·H2O
D.Na2CO3Na2CO3
Answer: B — Na2CO3·10H2O Washing soda is the decahydrate of sodium carbonate, Na2CO3·10H2O. Baking soda is NaHCO3, while caustic soda is NaOH.धावन सोडा सोडियम कार्बोनेट का डेका-हाइड्रेट है, Na2CO3·10H2O। बेकिंग सोडा NaHCO3 है, जबकि कास्टिक सोडा NaOH है।
Q25.s-Block Elements
'Milk of magnesia', a common antacid, is chemically:
'मिल्क ऑफ मैग्नेशिया', जो एक सामान्य प्रतिअम्ल है, रासायनिक रूप से है:
A.A saturated solution of MgSO4MgSO4 की संतृप्त विलयन
B.An aqueous suspension of Mg(OH)2Mg(OH)2 का जलीय निलंबन✓ Correct
C.A dilute solution of MgCl2MgCl2 का तनु विलयन
D.A paste of MgO in waterMgO का जल में मिश्रण
Answer: B — An aqueous suspension of Mg(OH)2 Milk of magnesia is an aqueous suspension of magnesium hydroxide, Mg(OH)2, used as an antacid and mild laxative. It is only sparingly soluble, which is why it is sold as a milky suspension.मिल्क ऑफ मैग्नेशिया मैग्नीशियम हाइड्रॉक्साइड, Mg(OH)2, का जलीय निलंबन है, जिसका उपयोग प्रतिअम्ल (antacid) और हलके विरेचक के रूप में होता है। यह बहुत कम विलेय है, इसलिए दूधिया निलंबन के रूप में मिलता है।
Q26.p-Block Elements
The chemical formula of borax is:
बोरेक्स का रासायनिक सूत्र है:
A.NaBO2·4H2ONaBO2·4H2O
B.H3BO3H3BO3
C.Na2B4O7·4H2ONa2B4O7·4H2O
D.Na2B4O7·10H2ONa2B4O7·10H2O✓ Correct
Answer: D — Na2B4O7·10H2O Borax (tincal) is sodium tetraborate decahydrate, Na2B4O7·10H2O. On heating it loses water and then gives the transparent borax bead used in the borax-bead test.बोरेक्स (टिंकल) सोडियम टेट्राबोरेट डेकाहाइड्रेट है, Na2B4O7·10H2O। गर्म करने पर यह जल खोता है और फिर पारदर्शी बोरेक्स मनका देता है, जो बोरेक्स-मनका परीक्षण में प्रयुक्त होता है।
Q27.p-Block Elements
The gas commonly filled in the glowing discharge tubes used for advertising signs is:
विज्ञापन बोर्डों की चमकती नलिकाओं (discharge tubes) में सामान्यतः भरी जाने वाली गैस है:
A.Argonआर्गन
B.Kryptonक्रिप्टॉन
C.Neonनियॉन✓ Correct
D.Xenonज़ेनॉन
Answer: C — Neon Neon gas glows a brilliant orange-red when an electric discharge passes through it at low pressure, which is why neon is filled in advertising sign tubes. Argon and other gases give different colours.कम दाब पर विद्युत विसर्जन गुज़रने पर नियॉन गैस चमकीली नारंगी-लाल रंग से चमकती है, इसलिए विज्ञापन बोर्ड की नलिकाओं में नियॉन भरी जाती है। आर्गन आदि गैसें अन्य रंग देती हैं।
Q28.p-Block Elements
Which of the following is the strongest oxoacid of chlorine?
निम्नलिखित में से क्लोरीन का सबसे प्रबल ऑक्सो-अम्ल है:
A.HClO4HClO4✓ Correct
B.HClOHClO
C.HClO2HClO2
D.HClO3HClO3
Answer: A — HClO4 The oxidising strength of chlorine's oxoacids increases with the oxidation state of chlorine (+1 in HClO, +3 in HClO2, +5 in HClO3, +7 in HClO4) because the conjugate base becomes progressively more stable. Perchloric acid is therefore the strongest.क्लोरीन के ऑक्सो-अम्लों की ऑक्सीकरण क्षमता क्लोरीन की ऑक्सीकरण अवस्था (+1 HClO, +3 HClO2, +5 HClO3, +7 HClO4) बढ़ने के साथ बढ़ती है, क्योंकि संयुग्मी क्षार उत्तरोत्तर अधिक स्थिर होता जाता है। अतः परक्लोरिक अम्ल सबसे प्रबल है।
Q29.d- and f-Block Elements
In acidic medium, potassium permanganate (KMnO4) acts as an oxidising agent and is itself reduced to:
अम्लीय माध्यम में पोटैशियम परमैंगनेट (KMnO4) ऑक्सीकारक के रूप में कार्य करके स्वयं अपचित होकर देता है:
A.MnO2MnO2
B.MnO4²⁻MnO4²⁻
C.Mn³⁺Mn³⁺
D.Mn²⁺Mn²⁺✓ Correct
Answer: D — Mn²⁺ In acid solution permanganate is a powerful oxidising agent and is itself reduced from Mn(VII) to the nearly colourless Mn²⁺ ion — which is why the purple colour disappears at the end-point of a titration.अम्लीय विलयन में परमैंगनेट प्रबल ऑक्सीकारक है और स्वयं Mn(VII) से अपचित होकर लगभग रंगहीन Mn²⁺ आयन देता है — इसीलिए अनुमापन के अंतिम बिंदु पर बैंगनी रंग गायब हो जाता है।
Q30.d- and f-Block Elements
Stainless steel is an alloy of iron mainly with:
स्टेनलेस स्टील में लोहे के साथ मुख्य रूप से मिश्रित धातुएँ हैं:
A.Copper and zincताँबा और जस्ता
B.Chromium and nickelक्रोमियम और निकेल✓ Correct
C.Lead and tinसीसा और टिन
D.Manganese and siliconमैंगनीज़ और सिलिकॉन
Answer: B — Chromium and nickel Stainless steel typically contains about 18% chromium and 8% nickel alloyed with iron and a little carbon. The chromium forms an invisible protective oxide layer that prevents rusting.स्टेनलेस स्टील में सामान्यतः लोहे के साथ लगभग 18% क्रोमियम और 8% निकेल तथा थोड़ा कार्बन मिश्रित होता है। क्रोमियम एक अदृश्य सुरक्षात्मक ऑक्साइड परत बनाता है, जो जंग लगने से रोकती है।
Q31.Coordination Compounds
The metal present at the centre of the haemoglobin molecule is:
हीमोग्लोबिन अणु के केन्द्र में उपस्थित धातु है:
A.Ironआयरन✓ Correct
B.Magnesiumमैग्नीशियम
C.Cobaltकोबाल्ट
D.Copperकॉपर
Answer: A — Iron Haemoglobin, the oxygen-carrying protein of blood, has an iron(II) centre in its heme group that binds O2 reversibly. (Magnesium sits at the centre of chlorophyll, and cobalt in vitamin B12.)रक्त का ऑक्सीजन-वाही प्रोटीन हीमोग्लोबिन अपने हीम समूह के केन्द्र में iron(II) रखता है, जो O2 को उत्क्रमणीय रूप से बाँधता है। (मैग्नीशियम क्लोरोफिल के केन्द्र में और कोबाल्ट विटामिन B12 में होता है।)
Q32.Coordination Compounds
Which of the following complexes shows geometrical (cis–trans) isomerism?
निम्नलिखित में से कौन-सा संकुल ज्यामितीय (cis–trans) समावयवता दर्शाता है?
A.[Co(NH3)6]³⁺[Co(NH3)6]³⁺
B.[Co(NH3)5Cl]²⁺[Co(NH3)5Cl]²⁺
C.[Co(NH3)4Cl2]⁺[Co(NH3)4Cl2]⁺✓ Correct
D.[Ni(H2O)6]²⁺[Ni(H2O)6]²⁺
Answer: C — [Co(NH3)4Cl2]⁺ [Co(NH3)4Cl2]⁺ is an MA4B2 octahedral complex: the two Cl ligands can sit adjacent (cis, 90° apart) or opposite (trans, 180° apart), giving geometrical isomers. Complexes of type MA5B or MA6 cannot show this isomerism.[Co(NH3)4Cl2]⁺ एक MA4B2 अष्टफलकीय संकुल है: दो Cl लिगन्ड पास-पास (सिस, 90°) या आमने-सामने (ट्रांस, 180°) स्थित हो सकते हैं, जिससे ज्यामितीय समावयवी मिलते हैं। MA5B या MA6 प्रकार के संकुल यह समावयवता नहीं दर्शाते।
Q33.Haloalkanes
The most reactive alkyl halide in nucleophilic substitution reactions is:
न्यूक्लियोफिलिक प्रतिस्थापन अभिक्रियाओं में सबसे अधिक क्रियाशील ऐल्किल हैलाइड है:
A.R–IR–I✓ Correct
B.R–FR–F
C.R–ClR–Cl
D.R–BrR–Br
Answer: A — R–I Leaving-group ability in nucleophilic substitution follows I⁻ > Br⁻ > Cl⁻ > F⁻: iodide is the weakest base and the most polarisable, so a C–I bond breaks most readily. Alkyl iodides are thus the most reactive haloalkanes in both SN1 and SN2 reactions.न्यूक्लियोफिलिक प्रतिस्थापन में त्यागी-समूह क्षमता का क्रम I⁻ > Br⁻ > Cl⁻ > F⁻ है: आयोडाइड सबसे दुर्बल क्षार और सबसे अधिक ध्रुवणीय है, अतः C–I बंध सबसे आसानी से टूटता है। इसलिए ऐल्किल आयोडाइड SN1 और SN2 दोनों में सबसे अधिक क्रियाशील होते हैं।
Q34.Alcohols and Phenols
Denatured alcohol is prepared from industrial ethanol by making it unfit for drinking through:
विकृत ऐल्कोहॉल (denatured alcohol) औद्योगिक एथेनॉल को इस प्रकार पीने के अयोग्य बनाकर तैयार किया जाता है:
A.Distilling it to 78°Cइसे 78°C तक आसवित करके
B.Adding benzene to itइसमें बेंज़ीन मिलाकर
C.Making it absolute alcoholइसे निरपेक्ष (absolute) बनाकर
D.Adding poisonous methanol to itइसमें विषैला मेथेनॉल मिलाकर✓ Correct
Answer: D — Adding poisonous methanol to it Ethanol meant for industrial use is made unfit for drinking by adding poisonous methanol (and often pyridine and a dye); such spirit is called denatured alcohol or methylated spirit.औद्योगिक उपयोग के एथेनॉल को विषैला मेथेनॉल (और प्रायः पिरिडीन तथा रंजक) मिलाकर पीने के अयोग्य बनाया जाता है; ऐसी स्पिरिट को विकृत ऐल्कोहॉल (denatured alcohol) या मेथिलेटेड स्पिरिट कहते हैं।
Answer: B — 2,4,6-Trinitrophenol Picric acid is the common name of 2,4,6-trinitrophenol. The three strongly electron-withdrawing –NO2 groups make its –OH proton so easy to lose that, despite being a phenol, it behaves as a fairly strong acid and was also used as an explosive.पिक्रिक अम्ल 2,4,6-ट्राइनाइट्रोफीनॉल का सामान्य नाम है। तीन प्रबल इलेक्ट्रॉन-आकर्षी –NO2 समूह इसके –OH प्रोटॉन को इतना सुगम बना देते हैं कि फीनॉल होते हुए भी यह काफी प्रबल अम्ल की तरह व्यवहार करता है और विस्फोटक के रूप में भी प्रयुक्त हुआ था।
Q36.Aldehydes and Ketones
The Rosenmund reduction is:
रोज़ेनमुंड अपचयन (Rosenmund reduction) है:
A.Conversion of an acyl chloride to an alkane with Zn(Hg)/HClएसिल क्लोराइड का ऐल्केन में परिवर्तन, Zn(Hg)/HCl द्वारा
B.Conversion of a carboxylic acid to an alcohol with LiAlH4कार्बोक्सिलिक अम्ल का ऐल्कोहॉल में परिवर्तन, LiAlH4 द्वारा
C.Conversion of an acyl chloride to an aldehyde with H2/Pd-BaSO4एसिल क्लोराइड का ऐल्डिहाइड में परिवर्तन, H2/Pd-BaSO4 द्वारा✓ Correct
D.Conversion of an alkene to an alkane with H2/Niऐल्कीन का ऐल्केन में परिवर्तन, H2/Ni द्वारा
Answer: C — Conversion of an acyl chloride to an aldehyde with H2/Pd-BaSO4 In the Rosenmund reduction an acyl chloride is hydrogenated over a palladium catalyst poisoned with barium sulphate (Pd/BaSO4), which stops the reduction at the aldehyde stage instead of going on to the alcohol.रोज़ेनमुंड अपचयन में एसिल क्लोराइड का हाइड्रोजनीकरण बेरियम सल्फेट से विषाक्त पैलेडियम उत्प्रेरक (Pd/BaSO4) पर किया जाता है, जो अपचयन को ऐल्डिहाइड अवस्था पर रोक देता है, ऐल्कोहॉल तक नहीं जाने देता।
Q37.Aldehydes and Ketones
Tollens' reagent is:
टॉलेन्स अभिकर्मक (Tollens' reagent) है:
A.CuSO4 in dilute sulphuric acidतनु सल्फ्यूरिक अम्ल में CuSO4
Answer: C — Ammoniacal silver nitrate solution Tollens' reagent is freshly prepared ammoniacal silver nitrate solution, [Ag(NH3)2]⁺OH⁻. Aldehydes reduce it to metallic silver, which deposits as a bright mirror on the test-tube wall.टॉलेन्स अभिकर्मक ताज़ा बना अमोनियामय सिल्वर नाइट्रेट विलयन, [Ag(NH3)2]⁺OH⁻, है। ऐल्डिहाइड इसे धात्विक सिल्वर में अपचित करते हैं, जो परखनली की दीवार पर चमकीले दर्पण के रूप में जमा होता है।
Q38.Carboxylic Acids
Common table vinegar is a dilute aqueous solution of:
सामान्य खाने वाला सिरका (vinegar) किसका तनु जलीय विलयन है:
A.Citric acidसाइट्रिक अम्ल
B.Acetic acidएसिटिक अम्ल✓ Correct
C.Formic acidफॉर्मिक अम्ल
D.Lactic acidलैक्टिक अम्ल
Answer: B — Acetic acid Ordinary table vinegar is a dilute (about 5–8%) aqueous solution of acetic (ethanoic) acid, prepared by the fermentation of ethanol. It is this acetic acid that gives vinegar its sour taste and preservative action.सामान्य सिरका एसिटिक (एथेनॉइक) अम्ल का तनु (लगभग 5–8%) जलीय विलयन है, जो एथेनॉल के किण्वन से बनता है। यही एसिटिक अम्ल सिरके को खट्टा स्वाद और संरक्षक गुण देता है।
Q39.Amines
The reaction of aniline with NaNO2 and dilute HCl at 273–278 K, forming benzene diazonium chloride, is called:
273–278 K पर ऐनिलीन की NaNO2 और तनु HCl से अभिक्रिया, जिससे बेंज़ीन डायज़ोनियम क्लोराइड बनता है, कहलाती है:
Answer: D — Diazotisation Treating aniline with nitrous acid (NaNO2 + dilute HCl) at 273–278 K is called diazotisation; it gives benzene diazonium chloride, the starting point for azo dyes and the Sandmeyer reactions.273–278 K पर ऐनिलीन की नाइट्रस अम्ल (NaNO2 + तनु HCl) से क्रिया डायज़ोटीकरण कहलाती है; इससे बेंज़ीन डायज़ोनियम क्लोराइड बनता है, जो एज़ो रंजकों और सैंडमेयर अभिक्रियाओं का प्रारंभिक पदार्थ है।
Q40.Amines
Hinsberg's reagent, used to distinguish between amines, is:
हिन्सबर्ग अभिकर्मक (Hinsberg's reagent), जो एमीनों में अंतर करने के लिए प्रयुक्त होता है, है:
Answer: A — Benzene sulphonyl chloride Hinsberg's reagent is benzene sulphonyl chloride (C6H5SO2Cl). It is used to distinguish primary, secondary and tertiary amines, because the sulphonamides they form differ in their solubility in alkali.हिन्सबर्ग अभिकर्मक बेंज़ीन सल्फोनिल क्लोराइड (C6H5SO2Cl) है। इसका उपयोग प्राथमिक, द्वितीयक और तृतीयक एमीनों में अंतर करने के लिए होता है, क्योंकि उनसे बने सल्फोनामाइड क्षार में विलेयता में भिन्न होते हैं।