SarkariManzil
BPSC · TRE Teacher Recruitment

BPSC TRE Chemistry Set 9

By Archit Kumar · Published: 27 October 2026 · 40 questions · English + हिंदी
BPSC TRE marking rule: +1 for a correct answer, −1/3 for a wrong answer and −1/3 for a question left blank. In the online test, choose option E (Do not attempt) to skip a question safely at 0 marks — never leave a question blank.
▶ Play this set online — free, with timer, score & rank

Read all 40 questions below with answers and explanations, or play the set online in the SarkariManzil practice app. In the app, sets unlock in order — submit Set N to open Set N+1.

Q1.Coordination Chemistry

Which of the following is Zeise's salt?

निम्नलिखित में से ज़ाइस लवण कौन-सा है?

  1. A.K[PtCl3(C2H4)]·H2OK[PtCl3(C2H4)]·H2O✓ Correct
  2. B.K[PtCl3(NH3)]K[PtCl3(NH3)]
  3. C.[Pt(NH3)2Cl2][Pt(NH3)2Cl2]
  4. D.K2[PtCl6]K2[PtCl6]
Answer: A — K[PtCl3(C2H4)]·H2O
Zeise's salt is potassium trichloro(ethylene)platinate(II) monohydrate; platinum is in the +2 oxidation state and ethene binds side-on through its pi bond.ज़ाइस लवण पोटैशियम ट्राइक्लोरो(एथिलीन)प्लैटिनेट(II) मोनोहाइड्रेट है; इसमें प्लैटिनम की ऑक्सीकरण अवस्था +2 है और एथीन अपने पाई बंध से पार्श्व रूप में जुड़ती है।
Q2.Coordination Chemistry

Wilkinson's catalyst is used for which transformation?

विल्किंसन उत्प्रेरक का उपयोग किस रूपांतरण के लिए किया जाता है?

  1. A.Oxidation of alcohols to acidsऐल्कोहॉल का अम्लों में ऑक्सीकरण
  2. B.Hydrolysis of estersएस्टर का जल-अपघटन
  3. C.Hydrogenation of alkenesऐल्कीन का हाइड्रोजनीकरण✓ Correct
  4. D.Polymerisation of etheneएथीन का बहुलकीकरण
Answer: C — Hydrogenation of alkenes
Wilkinson's catalyst, RhCl(PPh3)3, is a homogeneous catalyst for the hydrogenation of carbon-carbon double bonds under mild conditions.विल्किंसन उत्प्रेरक, RhCl(PPh3)3, एक समांगी उत्प्रेरक है जो मंद परिस्थितियों में कार्बन-कार्बन द्विबंध के हाइड्रोजनीकरण के लिए प्रयुक्त होता है।
Q3.Organometallic Chemistry

In ferrocene, each cyclopentadienyl ring binds to iron through how many carbon atoms?

फेरोसीन में प्रत्येक साइक्लोपेंटाडाइनिल वलय आयरन से कितने कार्बन परमाणुओं द्वारा जुड़ती है?

  1. A.One carbon atom (η1)एक कार्बन परमाणु (η1)
  2. B.Five carbon atoms (η5)पाँच कार्बन परमाणु (η5)✓ Correct
  3. C.Three carbon atoms (η3)तीन कार्बन परमाणु (η3)
  4. D.Six carbon atoms (η6)छह कार्बन परमाणु (η6)
Answer: B — Five carbon atoms (η5)
Ferrocene, Fe(C5H5)2, is a sandwich compound in which the iron atom lies between two cyclopentadienyl rings, each bonded through all five carbons (η5).फेरोसीन, Fe(C5H5)2, एक सैंडविच यौगिक है जिसमें आयरन परमाणु दो साइक्लोपेंटाडाइनिल वलयों के बीच स्थित होता है और प्रत्येक वलय सभी पाँच कार्बनों से (η5) जुड़ी होती है।
Q4.Coordination Chemistry

The oxidation number of iron in the complex K4[Fe(CN)6] is:

संकुल K4[Fe(CN)6] में आयरन की ऑक्सीकरण संख्या है:

  1. A.+3+3
  2. B.00
  3. C.+4+4
  4. D.+2+2✓ Correct
Answer: D — +2
K4[Fe(CN)6]: 4(+1) + x + 6(−1) = 0, so x = +2. The complex is potassium hexacyanoferrate(II).K4[Fe(CN)6]: 4(+1) + x + 6(−1) = 0, अतः x = +2। यह संकुल पोटैशियम हेक्सासायनोफेरेट(II) है।
Q5.Bioinorganic Chemistry

In haemoglobin, the iron centre that reversibly binds oxygen is in which oxidation state?

हीमोग्लोबिन में ऑक्सीजन से उत्क्रमणीय रूप से जुड़ने वाला आयरन केंद्र किस ऑक्सीकरण अवस्था में होता है?

  1. A.Fe(III)Fe(III)
  2. B.Fe(II)Fe(II)✓ Correct
  3. C.Fe(IV)Fe(IV)
  4. D.Fe(0)Fe(0)
Answer: B — Fe(II)
Haemoglobin contains Fe(II) in its haem groups; O2 binds reversibly to Fe(II) without oxidising it. Oxidation to Fe(III) gives methaemoglobin, which cannot carry oxygen.हीमोग्लोबिन के हीम समूहों में Fe(II) होता है; O2, Fe(II) को ऑक्सीकृत किए बिना उससे उत्क्रमणीय रूप से जुड़ती है। Fe(III) में ऑक्सीकरण से मेटहीमोग्लोबिन बनता है जो ऑक्सीजन नहीं ढो सकता।
Q6.Bioinorganic Chemistry

Which metal is present at the centre of vitamin B12 (cobalamin)?

विटामिन B12 (कोबालऐमीन) के केंद्र में कौन-सी धातु होती है?

  1. A.Cobaltकोबाल्ट✓ Correct
  2. B.Nickelनिकेल
  3. C.Zincज़िंक
  4. D.Ironआयरन
Answer: A — Cobalt
Vitamin B12 is a cobalt-containing corrin complex; the cobalt ion is bound to four nitrogen atoms of the corrin ring.विटामिन B12 एक कोबाल्ट युक्त कॉरिन संकुल है; कोबाल्ट आयन कॉरिन वलय के चार नाइट्रोजन परमाणुओं से जुड़ा होता है।
Q7.Bioinorganic Chemistry

Which metal ion is at the centre of the chlorophyll molecule?

क्लोरोफिल अणु के केंद्र में कौन-सा धातु आयन होता है?

  1. A.Fe2+Fe2+
  2. B.Cu2+Cu2+
  3. C.Zn2+Zn2+
  4. D.Mg2+Mg2+✓ Correct
Answer: D — Mg2+
Chlorophyll is a magnesium complex of a chlorin (porphyrin-type) ring; Mg2+ sits at the centre and the molecule harvests light for photosynthesis.क्लोरोफिल क्लोरिन (पॉरफिरिन-प्रकार) वलय का मैग्नीशियम संकुल है; Mg2+ केंद्र में स्थित होता है और यह अणु प्रकाश-संश्लेषण के लिए प्रकाश ग्रहण करता है।
Q8.Coordination Chemistry

Cisplatin, an anticancer drug, has which formula?

कैंसररोधी औषधि सिसप्लैटिन का सूत्र कौन-सा है?

  1. A.trans-[Pt(NH3)2Cl2]trans-[Pt(NH3)2Cl2]
  2. B.[Pt(NH3)4]Cl2[Pt(NH3)4]Cl2
  3. C.cis-[Pt(NH3)2Cl2]cis-[Pt(NH3)2Cl2]✓ Correct
  4. D.K2[PtCl4]K2[PtCl4]
Answer: C — cis-[Pt(NH3)2Cl2]
Cisplatin is cis-diamminedichloroplatinum(II); only the cis isomer is active against cancer because its geometry lets it bind DNA in a way that blocks replication. The trans isomer is inactive.सिसप्लैटिन सिस-डाइऐमीनडाइक्लोरोप्लैटिनम(II) है; केवल सिस समावयव ही कैंसर के विरुद्ध सक्रिय है क्योंकि उसकी ज्यामिति उसे DNA से इस प्रकार जुड़ने देती है कि प्रतिकृति रुक जाती है। ट्रांस समावयव निष्क्रिय है।
Q9.Coordination Chemistry

The pair [Co(NH3)5NO2]2+ and [Co(NH3)5ONO]2+ illustrates which type of isomerism?

युग्म [Co(NH3)5NO2]2+ और [Co(NH3)5ONO]2+ किस प्रकार की समावयवता दर्शाता है?

  1. A.Geometrical isomerismज्यामितीय समावयवता
  2. B.Optical isomerismप्रकाशिक समावयवता
  3. C.Coordination isomerismउपसहसंयोजन समावयवता
  4. D.Linkage isomerismबंधन समावयवता✓ Correct
Answer: D — Linkage isomerism
The nitrite ligand is ambidentate: it can bind through nitrogen (nitro, –NO2) or through oxygen (nitrito, –ONO). The two forms are linkage isomers.नाइट्राइट लिगैंड उभयदंती है: यह नाइट्रोजन से (नाइट्रो, –NO2) या ऑक्सीजन से (नाइट्राइटो, –ONO) जुड़ सकता है। ये दोनों रूप बंधन समावयव हैं।
Q10.Coordination Chemistry

Which of the following complex ions shows optical isomerism?

निम्नलिखित में से कौन-सा संकुल आयन प्रकाशिक समावयवता दर्शाता है?

  1. A.[Co(en)3]3+[Co(en)3]3+✓ Correct
  2. B.[Co(NH3)6]3+[Co(NH3)6]3+
  3. C.trans-[Co(NH3)4Cl2]+trans-[Co(NH3)4Cl2]+
  4. D.[Pt(NH3)2Cl2] (square planar)[Pt(NH3)2Cl2] (वर्ग समतलीय)
Answer: A — [Co(en)3]3+
[Co(en)3]3+ is chiral: its three chelate rings form a propeller shape with no plane of symmetry, so it exists as non-superimposable mirror images (Δ and Λ forms).[Co(en)3]3+ किरैल है: इसकी तीन कीलेट वलयें प्रोपेलर जैसी आकृति बनाती हैं जिसमें सममिति तल नहीं होता, इसलिए यह अनअध्यारोपणीय दर्पण प्रतिबिंबों (Δ और Λ रूपों) के रूप में पाया जाता है।
Q11.Coordination Chemistry

The complex ion [Fe(CN)6]4- is diamagnetic. What does this show about its d-electrons?

संकुल आयन [Fe(CN)6]4- प्रतिचुंबकीय है। यह इसके d-इलेक्ट्रॉनों के बारे में क्या दर्शाता है?

  1. A.Four unpaired electrons, high-spinचार अयुग्मित इलेक्ट्रॉन, उच्च-चक्रण
  2. B.Two unpaired electrons, high-spinदो अयुग्मित इलेक्ट्रॉन, उच्च-चक्रण
  3. C.No unpaired electrons, low-spin d6कोई अयुग्मित इलेक्ट्रॉन नहीं, निम्न-चक्रण d6✓ Correct
  4. D.Six unpaired electronsछह अयुग्मित इलेक्ट्रॉन
Answer: C — No unpaired electrons, low-spin d6
CN- is a strong-field ligand, so Fe(II) (d6) pairs all six electrons in the lower t2g set: t2g6 eg0, zero unpaired electrons, hence diamagnetic.CN- एक प्रबल-क्षेत्र लिगैंड है, इसलिए Fe(II) (d6) के सभी छह इलेक्ट्रॉन निचले t2g समुच्चय में युग्मित हो जाते हैं: t2g6 eg0, शून्य अयुग्मित इलेक्ट्रॉन, अतः प्रतिचुंबकीय।
Q12.Coordination Chemistry

Which of the following ligands is a pi-acceptor (π-acid) ligand that forms synergic bonds with a metal?

निम्नलिखित में से कौन-सा लिगैंड पाई-ग्राही (π-अम्ल) लिगैंड है जो धातु के साथ सहक्रियात्मक (सिनर्जिक) बंध बनाता है?

  1. A.F−F−
  2. B.COCO✓ Correct
  3. C.NH3NH3
  4. D.H2OH2O
Answer: B — CO
CO is a pi-acid ligand: it donates its lone pair to the metal and accepts metal d-electron density into its empty pi-star orbitals (synergic bonding), as in metal carbonyls such as Ni(CO)4.CO एक पाई-अम्ल लिगैंड है: यह धातु को अपना एकाकी युग्म देता है और धातु के d-इलेक्ट्रॉन घनत्व को अपने रिक्त pi-स्टार कक्षकों में ग्रहण करता है (सहक्रियात्मक बंधन), जैसे Ni(CO)4 जैसे धातु कार्बोनिलों में।
Q13.f-Block Elements

The oxidation state most commonly shown by the lanthanide elements is:

लैंथेनाइड तत्वों द्वारा सबसे सामान्यतः दर्शाई जाने वाली ऑक्सीकरण अवस्था है:

  1. A.+3+3✓ Correct
  2. B.+2+2
  3. C.+4+4
  4. D.+1+1
Answer: A — +3
Most lanthanides show the +3 oxidation state, formed by loss of the two 6s electrons and one 5d/4f electron; it is the characteristic and most stable state across the series.अधिकांश लैंथेनाइड +3 ऑक्सीकरण अवस्था दर्शाते हैं, जो दो 6s इलेक्ट्रॉनों और एक 5d/4f इलेक्ट्रॉन के निकलने से बनती है; यह श्रेणी भर में अभिलाक्षणिक और सबसे स्थायी अवस्था है।
Q14.f-Block Elements

Misch metal, used in lighter flints, is an alloy of which group of elements?

लाइटर की चकमक में प्रयुक्त मिश्र धातु (मिश मेटल) किस तत्व-समूह की मिश्रधातु है?

  1. A.Actinoids onlyकेवल ऐक्टिनॉयड
  2. B.Iron and carbonआयरन और कार्बन
  3. C.Alkali metalsक्षार धातुएँ
  4. D.Lanthanoids with iron and traces of other elementsलैंथेनॉयड तथा आयरन एवं अन्य तत्वों के अंश✓ Correct
Answer: D — Lanthanoids with iron and traces of other elements
Misch metal contains about 95% lanthanoid metals, about 5% iron and traces of sulphur, carbon, calcium and aluminium; it is pyrophoric and used in lighter flints.मिश्र धातु में लगभग 95% लैंथेनॉयड धातुएँ, लगभग 5% आयरन तथा सल्फर, कार्बन, कैल्सियम और ऐलुमिनियम के अंश होते हैं; यह ज्वलनशील (पायरोफोरिक) है और लाइटर की चकमक में प्रयुक्त होती है।
Q15.Amines

In the Hoffmann bromamide degradation, an amide R-CONH2 gives an amine with how many carbon atoms, relative to the amide?

हॉफमान ब्रोमऐमाइड निम्नीकरण में ऐमाइड R-CONH2 से प्राप्त ऐमीन में ऐमाइड की तुलना में कितने कार्बन परमाणु होते हैं?

  1. A.One carbon moreएक कार्बन अधिक
  2. B.Same number of carbonsकार्बनों की संख्या समान
  3. C.One carbon fewerएक कार्बन कम✓ Correct
  4. D.Two carbons fewerदो कार्बन कम
Answer: C — One carbon fewer
R-CONH2 + Br2 + 4NaOH → R-NH2 + Na2CO3 + 2NaBr + 2H2O. The carbonyl carbon is lost as carbonate, so the amine has one carbon fewer than the amide.R-CONH2 + Br2 + 4NaOH → R-NH2 + Na2CO3 + 2NaBr + 2H2O। कार्बोनिल कार्बन कार्बोनेट के रूप में निकल जाता है, इसलिए ऐमीन में ऐमाइड से एक कार्बन कम होता है।
Q16.Amines

A primary aromatic amine, after diazotisation with NaNO2 and HCl at 0-5 °C, is coupled with alkaline beta-naphthol. The product is:

एक प्राथमिक ऐरोमैटिक ऐमीन को 0-5 °C पर NaNO2 और HCl से डाइऐज़ोटीकृत करने के बाद क्षारीय बीटा-नैफ्थॉल के साथ युग्मित किया जाता है। उत्पाद है:

  1. A.A white precipitateएक श्वेत अवक्षेप
  2. B.A bright orange-red azo dyeएक चमकीला नारंगी-लाल ऐज़ो रंजक✓ Correct
  3. C.A yellow oily liquidएक पीला तैलीय द्रव
  4. D.No reaction takes placeकोई अभिक्रिया नहीं होती
Answer: B — A bright orange-red azo dye
This is the azo dye test for primary aromatic amines: the diazonium salt couples with beta-naphthol to give a bright orange-red azo dye.यह प्राथमिक ऐरोमैटिक ऐमीनों का ऐज़ो रंजक परीक्षण है: डाइऐज़ोनियम लवण बीटा-नैफ्थॉल से युग्मित होकर चमकीला नारंगी-लाल ऐज़ो रंजक देता है।
Q17.Amines

With Hinsberg's reagent (benzenesulfonyl chloride), a tertiary amine gives what result?

हिंसबर्ग अभिकर्मक (बेंज़ीनसल्फोनिल क्लोराइड) के साथ तृतीयक ऐमीन क्या परिणाम देती है?

  1. A.No reaction, because it has no hydrogen on nitrogenकोई अभिक्रिया नहीं, क्योंकि नाइट्रोजन पर हाइड्रोजन नहीं है✓ Correct
  2. B.A sulfonamide soluble in alkaliक्षार में विलेय सल्फोनऐमाइड
  3. C.A sulfonamide insoluble in alkaliक्षार में अविलेय सल्फोनऐमाइड
  4. D.A foul-smelling isocyanideदुर्गंधित आइसोसायनाइड
Answer: A — No reaction, because it has no hydrogen on nitrogen
Hinsberg's reagent reacts with the N–H hydrogen of primary and secondary amines. A tertiary amine has no N–H hydrogen, so it does not react.हिंसबर्ग अभिकर्मक प्राथमिक और द्वितीयक ऐमीनों के N–H हाइड्रोजन से अभिक्रिया करता है। तृतीयक ऐमीन में N–H हाइड्रोजन नहीं होता, इसलिए वह अभिक्रिया नहीं करती।
Q18.Diazonium Salts

Coupling of a diazonium salt with phenol is best carried out in which medium?

डाइऐज़ोनियम लवण का फीनॉल के साथ युग्मन किस माध्यम में सर्वोत्तम रूप से किया जाता है?

  1. A.Strongly acidic mediumप्रबल अम्लीय माध्यम
  2. B.Concentrated sulfuric acidसांद्र सल्फ्यूरिक अम्ल
  3. C.Neutral water onlyकेवल उदासीन जल
  4. D.Mildly alkaline mediumमंद क्षारीय माध्यम✓ Correct
Answer: D — Mildly alkaline medium
Phenol couples in mildly alkaline solution, where it exists as phenoxide ion, a much stronger nucleophile for electrophilic attack by the diazonium ion at the para position.फीनॉल मंद क्षारीय विलयन में युग्मन करता है, जहाँ वह फीनॉक्साइड आयन के रूप में होता है — डाइऐज़ोनियम आयन के इलेक्ट्रॉनस्नेही आक्रमण के लिए यह कहीं अधिक प्रबल नाभिकस्नेही है, और आक्रमण पैरा स्थिति पर होता है।
Q19.Amines

Direct nitration of aniline with concentrated HNO3 and H2SO4 gives, as the major product (about 47%), which compound?

ऐनिलीन का सांद्र HNO3 और H2SO4 से सीधा नाइट्रीकरण करने पर मुख्य उत्पाद (लगभग 47%) कौन-सा यौगिक प्राप्त होता है?

  1. A.p-Nitroanilinep-नाइट्रोऐनिलीन
  2. B.m-Nitroanilinem-नाइट्रोऐनिलीन✓ Correct
  3. C.o-Nitroanilineo-नाइट्रोऐनिलीन
  4. D.2,4,6-Trinitroaniline2,4,6-ट्राइनाइट्रोऐनिलीन
Answer: B — m-Nitroaniline
In strongly acidic medium aniline is protonated to the anilinium ion, which is meta-directing; so direct nitration gives m-nitroaniline as the major product (about 47%), along with p- (35%) and o- (2%) isomers.प्रबल अम्लीय माध्यम में ऐनिलीन प्रोटॉनित होकर ऐनिलिनियम आयन बनाती है, जो मेटा-निर्देशी होता है; इसलिए सीधे नाइट्रीकरण से m-नाइट्रोऐनिलीन मुख्य उत्पाद (लगभग 47%) के रूप में मिलती है, साथ में p- (35%) और o- (2%) समावयव भी बनते हैं।
Q20.Carboxylic Acids

In Kolbe's electrolytic reaction, electrolysis of an aqueous solution of sodium acetate gives which gas at the anode?

कोल्बे विद्युत-अपघटनी अभिक्रिया में सोडियम ऐसीटेट के जलीय विलयन के विद्युत-अपघटन से ऐनोड पर कौन-सी गैस प्राप्त होती है?

  1. A.Methaneमेथेन
  2. B.Hydrogenहाइड्रोजन
  3. C.Ethaneएथेन✓ Correct
  4. D.Carbon monoxideकार्बन मोनोऑक्साइड
Answer: C — Ethane
At the anode, two acetate ions lose electrons and decarboxylate: 2CH3COO- gives C2H6 + 2CO2 + 2e-, so ethane (with carbon dioxide) is formed at the anode; hydrogen is evolved at the cathode.ऐनोड पर दो ऐसीटेट आयन इलेक्ट्रॉन त्यागकर विकार्बोक्सिलीकृत होते हैं: 2CH3COO- से C2H6 + 2CO2 + 2e- प्राप्त होते हैं, इसलिए ऐनोड पर एथेन (कार्बन डाइऑक्साइड सहित) बनती है; कैथोड पर हाइड्रोजन निकलती है।
Q21.Aldehydes and Ketones

In the Etard reaction, toluene is oxidised with chromyl chloride (CrO2Cl2) and the chromium complex so formed is hydrolysed. The final product is:

एटार्ड अभिक्रिया में टॉलूईन का क्रोमिल क्लोराइड (CrO2Cl2) से ऑक्सीकरण किया जाता है और बना क्रोमियम संकुल जल-अपघटित किया जाता है। अंतिम उत्पाद है:

  1. A.Benzyl alcoholबेंज़िल ऐल्कोहॉल
  2. B.Acetophenoneऐसीटोफीनोन
  3. C.Benzoic acidबेंज़ोइक अम्ल
  4. D.Benzaldehydeबेंज़ैल्डिहाइड✓ Correct
Answer: D — Benzaldehyde
Etard oxidation converts the methyl group of toluene only up to the aldehyde stage: the chromium complex formed with CrO2Cl2 hydrolyses to give benzaldehyde.एटार्ड ऑक्सीकरण टॉलूईन के मेथिल समूह को केवल ऐल्डिहाइड अवस्था तक ऑक्सीकृत करता है: CrO2Cl2 से बना क्रोमियम संकुल जल-अपघटन पर बेंज़ैल्डिहाइड देता है।
Q22.Aldehydes and Ketones

Stephen reduction converts a nitrile into which product?

स्टीफन अपचयन नाइट्राइल को किस उत्पाद में बदलता है?

  1. A.An aldehydeएक ऐल्डिहाइड✓ Correct
  2. B.A ketoneएक कीटोन
  3. C.A primary amineएक प्राथमिक ऐमीन
  4. D.A carboxylic acidएक कार्बोक्सिलिक अम्ल
Answer: A — An aldehyde
In Stephen reduction, a nitrile is reduced with SnCl2 and HCl to an imine intermediate (aldimine stannichloride), which hydrolyses to the aldehyde.स्टीफन अपचयन में नाइट्राइल का SnCl2 और HCl द्वारा अपचयन एक इमीन मध्यवर्ती (ऐल्डिमीन स्टैनिक क्लोराइड) तक होता है, जो जल-अपघटन पर ऐल्डिहाइड देता है।
Q23.Aldehydes and Ketones

Wolff-Kishner reduction uses which reagent combination to convert a carbonyl group into a methylene group?

वोल्फ-किश्नर अपचयन कार्बोनिल समूह को मेथिलीन समूह में बदलने के लिए किस अभिकर्मक-संयोजन का उपयोग करता है?

  1. A.Zn-Hg and concentrated HClZn-Hg और सांद्र HCl
  2. B.LiAlH4 in etherईथर में LiAlH4
  3. C.Hydrazine and strong base with heatहाइड्राज़ीन और प्रबल क्षार, ऊष्मा सहित✓ Correct
  4. D.NaBH4 in methanolमेथेनॉल में NaBH4
Answer: C — Hydrazine and strong base with heat
Wolff-Kishner reduction heats the hydrazone of the carbonyl compound with a strong base (KOH in ethylene glycol), eliminating nitrogen and leaving CH2. Unlike Clemmensen reduction, it works under basic conditions.वोल्फ-किश्नर अपचयन में कार्बोनिल यौगिक के हाइड्राज़ोन को प्रबल क्षार (एथिलीन ग्लाइकॉल में KOH) के साथ गरम किया जाता है, जिससे नाइट्रोजन निकल जाती है और CH2 बचता है। क्लेमेंसन अपचयन के विपरीत, यह क्षारीय परिस्थितियों में होता है।
Q24.Aldehydes and Ketones

The benzoin condensation of benzaldehyde is catalysed by which reagent?

बेंज़ैल्डिहाइड का बेंज़ोइन संघनन किस अभिकर्मक द्वारा उत्प्रेरित होता है?

  1. A.Dilute NaOHतनु NaOH
  2. B.Ethanolic potassium cyanide (KCN)एथेनॉलिक पोटैशियम सायनाइड (KCN)✓ Correct
  3. C.Concentrated H2SO4सांद्र H2SO4
  4. D.Anhydrous AlCl3निर्जल AlCl3
Answer: B — Ethanolic potassium cyanide (KCN)
Two molecules of benzaldehyde condense in ethanolic KCN to give benzoin (an alpha-hydroxy ketone); the cyanide ion acts as a catalyst by temporarily reversing the polarity of the carbonyl carbon.बेंज़ैल्डिहाइड के दो अणु एथेनॉलिक KCN में संघनित होकर बेंज़ोइन (एक ऐल्फा-हाइड्रॉक्सी कीटोन) देते हैं; सायनाइड आयन कार्बोनिल कार्बन की ध्रुवता को अस्थायी रूप से उलटकर उत्प्रेरक का कार्य करता है।
Q25.Aldehydes and Ketones

Formalin, used to preserve biological specimens, is an aqueous solution of which compound?

जैविक नमूनों के संरक्षण में प्रयुक्त फॉर्मेलिन किस यौगिक का जलीय विलयन है?

  1. A.Formaldehydeफॉर्मैल्डिहाइड✓ Correct
  2. B.Formic acidफॉर्मिक अम्ल
  3. C.Acetaldehydeऐसीटैल्डिहाइड
  4. D.Methanolमेथेनॉल
Answer: A — Formaldehyde
Formalin is a 37-40% aqueous solution of formaldehyde (methanal); it hardens and preserves tissues, which is why it is used for storing biological specimens.फॉर्मेलिन फॉर्मैल्डिहाइड (मेथेनैल) का 37-40% जलीय विलयन है; यह ऊतकों को कठोर करके संरक्षित करता है, इसलिए जैविक नमूनों को रखने में प्रयुक्त होता है।
Q26.Electrochemistry

For the cell Zn | Zn2+ (0.01 M) || Cu2+ (0.1 M) | Cu at 298 K, with E°cell = 1.10 V, what is the cell potential Ecell?

298 K पर सेल Zn | Zn2+ (0.01 M) || Cu2+ (0.1 M) | Cu के लिए, E°cell = 1.10 V होने पर सेल विभव Ecell कितना होगा?

  1. A.1.07 V1.07 V
  2. B.1.10 V1.10 V
  3. C.1.04 V1.04 V
  4. D.1.13 V1.13 V✓ Correct
Answer: D — 1.13 V
Ecell = E°cell − (0.059/2) log([Zn2+]/[Cu2+]) = 1.10 − 0.0295 × log(0.01/0.1) = 1.10 − 0.0295 × (−1) = 1.13 V.Ecell = E°cell − (0.059/2) log([Zn2+]/[Cu2+]) = 1.10 − 0.0295 × log(0.01/0.1) = 1.10 − 0.0295 × (−1) = 1.13 V।
Q27.Electrochemistry

According to Kohlrausch's law, the molar conductivity of a strong electrolyte at infinite dilution is given by which relation?

कोलराउश नियम के अनुसार प्रबल विद्युत-अपघट्य की अनंत तनुता पर मोलर चालकता किस संबंध से दी जाती है?

  1. A.Λ°m = Λm − A√cΛ°m = Λm − A√c
  2. B.Λ°m = λ°+ + λ°− (sum of ionic contributions)Λ°m = λ°+ + λ°− (आयनिक योगदानों का योग)✓ Correct
  3. C.Λ°m = κ / c onlyकेवल Λ°m = κ / c
  4. D.Λ°m = κ × 1000 / MΛ°m = κ × 1000 / M
Answer: B — Λ°m = λ°+ + λ°− (sum of ionic contributions)
Kohlrausch's law of independent migration of ions states that the limiting molar conductivity of an electrolyte is the sum of the limiting ionic conductivities of its cation and anion.आयनों के स्वतंत्र अभिगमन का कोलराउश नियम कहता है कि किसी विद्युत-अपघट्य की सीमांत मोलर चालकता उसके धनायन और ऋणायन की सीमांत आयनिक चालकताओं का योग होती है।
Q28.Electrochemistry

In a lead storage battery, the electrolyte used is:

लेड संचायक बैटरी में प्रयुक्त विद्युत-अपघट्य है:

  1. A.Dilute nitric acidतनु नाइट्रिक अम्ल
  2. B.Potassium hydroxide solutionपोटैशियम हाइड्रॉक्साइड विलयन
  3. C.Sulphuric acid of about 38% concentrationलगभग 38% सांद्रता का सल्फ्यूरिक अम्ल✓ Correct
  4. D.Acetic acidऐसीटिक अम्ल
Answer: C — Sulphuric acid of about 38% concentration
A lead storage battery uses about 38% sulphuric acid as electrolyte; during discharge both electrodes form PbSO4 and the density of the acid falls, which is how its state of charge is checked.लेड संचायक बैटरी में लगभग 38% सल्फ्यूरिक अम्ल विद्युत-अपघट्य के रूप में प्रयुक्त होता है; निरावेशन के दौरान दोनों इलेक्ट्रोडों पर PbSO4 बनता है और अम्ल का घनत्व घटता है, जिससे उसकी आवेश स्थिति जाँची जाती है।
Q29.Electrochemistry

In cathodic protection of an iron pipeline, which metal is commonly attached as a sacrificial anode?

आयरन पाइपलाइन के कैथोडिक संरक्षण में बलिदानी ऐनोड के रूप में सामान्यतः कौन-सी धातु लगाई जाती है?

  1. A.Copperताँबा
  2. B.Magnesium (or zinc)मैग्नीशियम (या ज़िंक)✓ Correct
  3. C.Silverचाँदी
  4. D.Platinumप्लैटिनम
Answer: B — Magnesium (or zinc)
A more reactive metal such as magnesium or zinc is attached to iron; it oxidises preferentially (is sacrificed) while iron remains the cathode and is protected from corrosion.आयरन के साथ मैग्नीशियम या ज़िंक जैसी अधिक क्रियाशील धातु लगाई जाती है; वह प्राथमिकता से ऑक्सीकृत होती है (बलिदान होती है) जबकि आयरन कैथोड बना रहता है और संक्षारण से सुरक्षित रहता है।
Q30.Polymers

Which of the following is a biodegradable polymer?

निम्नलिखित में से कौन-सा जैव-निम्नीकरणीय बहुलक है?

  1. A.PVCPVC
  2. B.Polystyreneपॉलिस्टाइरीन
  3. C.Nylon-6,6नायलॉन-6,6
  4. D.PHBV (polyhydroxybutyrate-co-hydroxyvalerate)PHBV (पॉलिहाइड्रॉक्सीब्यूटिरेट-को-हाइड्रॉक्सीवैलेरेट)✓ Correct
Answer: D — PHBV (polyhydroxybutyrate-co-hydroxyvalerate)
PHBV is a biodegradable polyester produced by microorganisms; unlike PVC, polystyrene and nylon-6,6, it is broken down by bacteria in the environment.PHBV सूक्ष्मजीवों द्वारा उत्पादित एक जैव-निम्नीकरणीय पॉलिएस्टर है; PVC, पॉलिस्टाइरीन और नायलॉन-6,6 के विपरीत, यह पर्यावरण में जीवाणुओं द्वारा विघटित हो जाता है।
Q31.Polymers

Nylon-6,6 is obtained by condensation polymerisation of which pair?

नायलॉन-6,6 किन दो यौगिकों के संघनन बहुलकीकरण से प्राप्त होता है?

  1. A.Adipic acid and hexamethylenediamineऐडिपिक अम्ल और हेक्सामेथिलीनडाइऐमीन✓ Correct
  2. B.Caprolactam onlyकेवल कैप्रोलैक्टम
  3. C.Terephthalic acid and ethylene glycolटेरेफ्थैलिक अम्ल और एथिलीन ग्लाइकॉल
  4. D.Phenol and formaldehydeफीनॉल और फॉर्मैल्डिहाइड
Answer: A — Adipic acid and hexamethylenediamine
Nylon-6,6 is a polyamide from hexamethylenediamine (6 carbons) and adipic acid (6 carbons), joined by amide links with loss of water.नायलॉन-6,6 हेक्सामेथिलीनडाइऐमीन (6 कार्बन) और ऐडिपिक अम्ल (6 कार्बन) से बना पॉलिऐमाइड है, जो जल के निष्कासन के साथ ऐमाइड बंधों से जुड़ते हैं।
Q32.Polymers

Neoprene, a synthetic rubber, is a polymer of which monomer?

संश्लेषित रबर निओप्रीन किस एकलक का बहुलक है?

  1. A.Isopreneआइसोप्रीन
  2. B.Styreneस्टाइरीन
  3. C.Chloroprene (2-chlorobuta-1,3-diene)क्लोरोप्रीन (2-क्लोरोब्यूटा-1,3-डाइन)✓ Correct
  4. D.Acrylonitrileऐक्रिलोनाइट्राइल
Answer: C — Chloroprene (2-chlorobuta-1,3-diene)
Neoprene is polychloroprene, formed by free-radical polymerisation of chloroprene; it resists oil and weathering better than natural rubber.निओप्रीन पॉलिक्लोरोप्रीन है, जो क्लोरोप्रीन के मुक्त-मूलक बहुलकीकरण से बनता है; यह प्राकृतिक रबर की तुलना में तेल और मौसम का बेहतर प्रतिरोध करता है।
Q33.Polymers

In the vulcanisation of natural rubber, rubber is heated with which element to form cross-links between its polymer chains?

प्राकृतिक रबर के वल्कनीकरण में उसकी बहुलक शृंखलाओं के बीच क्रॉस-बंध बनाने के लिए रबर को किस तत्व के साथ गरम किया जाता है?

  1. A.Carbonकार्बन
  2. B.Zincज़िंक
  3. C.Chlorineक्लोरीन
  4. D.Sulphurसल्फर✓ Correct
Answer: D — Sulphur
Vulcanisation heats raw rubber with sulphur (with accelerators); sulphur forms cross-links between polyisoprene chains, making rubber harder, stronger and elastic over a wider temperature range.वल्कनीकरण में कच्ची रबर को सल्फर (त्वरकों सहित) के साथ गरम किया जाता है; सल्फर पॉलिआइसोप्रीन शृंखलाओं के बीच क्रॉस-बंध बनाता है, जिससे रबर अधिक कठोर, मज़बूत और व्यापक ताप-परास में प्रत्यास्थ बनती है।
Q34.Chemistry in Everyday Life

Which of the following medicines is an antibiotic?

निम्नलिखित में से कौन-सी औषधि एक प्रतिजैविक (एंटीबायोटिक) है?

  1. A.Aspirinऐस्पिरिन
  2. B.Penicillinपेनिसिलिन✓ Correct
  3. C.Paracetamolपैरासिटामॉल
  4. D.Ranitidineरैनिटिडीन
Answer: B — Penicillin
Penicillin, obtained from the fungus Penicillium, kills bacteria or stops their growth, so it is an antibiotic. Aspirin and paracetamol are analgesic-antipyretics, and ranitidine is an antacid.पेनिसिलिन, जो पेनिसिलियम कवक से प्राप्त होती है, जीवाणुओं को मारती है या उनकी वृद्धि रोकती है, इसलिए यह एक प्रतिजैविक है। ऐस्पिरिन और पैरासिटामॉल पीड़ाहारी-ज्वरनाशक हैं और रैनिटिडीन एक प्रति-अम्ल है।
Q35.Chemistry in Everyday Life

Why do synthetic detergents clean effectively in hard water while soaps do not?

संश्लेषित अपमार्जक कठोर जल में प्रभावी सफाई क्यों करते हैं जबकि साबुन नहीं करते?

  1. A.Detergents are acidic, soaps are basicअपमार्जक अम्लीय होते हैं, साबुन क्षारीय होते हैं
  2. B.Detergents contain bleaching agentsअपमार्जकों में विरंजक होते हैं
  3. C.Detergent salts of calcium and magnesium remain soluble, unlike soap scumअपमार्जकों के कैल्सियम और मैग्नीशियम लवण विलेय रहते हैं, साबुन के मैल के विपरीत✓ Correct
  4. D.Detergents do not form micellesअपमार्जक मिसेल नहीं बनाते
Answer: C — Detergent salts of calcium and magnesium remain soluble, unlike soap scum
Soaps form insoluble calcium and magnesium salts (scum) in hard water. Synthetic detergents are usually sulfonate salts whose calcium and magnesium salts stay soluble, so cleansing continues.साबुन कठोर जल में कैल्सियम और मैग्नीशियम के अविलेय लवण (मैल) बनाते हैं। संश्लेषित अपमार्जक सामान्यतः सल्फोनेट लवण होते हैं जिनके कैल्सियम और मैग्नीशियम लवण विलेय रहते हैं, इसलिए सफाई जारी रहती है।
Q36.Environmental Chemistry

Which of the following is a secondary pollutant, formed in the atmosphere by reactions between primary pollutants?

निम्नलिखित में से कौन-सा द्वितीयक प्रदूषक है, जो वायुमंडल में प्राथमिक प्रदूषकों के बीच अभिक्रियाओं से बनता है?

  1. A.Peroxyacetyl nitrate (PAN)पेरॉक्सीऐसीटिल नाइट्रेट (PAN)✓ Correct
  2. B.Carbon monoxideकार्बन मोनोऑक्साइड
  3. C.Sulphur dioxideसल्फर डाइऑक्साइड
  4. D.Carbon dioxideकार्बन डाइऑक्साइड
Answer: A — Peroxyacetyl nitrate (PAN)
PAN is not emitted directly; it forms in sunlight when nitrogen oxides react with hydrocarbons, and is a key irritant component of photochemical smog. CO, SO2 and CO2 are primary pollutants emitted from sources.PAN सीधे उत्सर्जित नहीं होता; यह सूर्य के प्रकाश में नाइट्रोजन ऑक्साइडों की हाइड्रोकार्बनों से अभिक्रिया से बनता है और प्रकाश-रासायनिक धूम-कुहेरे का प्रमुख उत्तेजक घटक है। CO, SO2 और CO2 स्रोतों से उत्सर्जित प्राथमिक प्रदूषक हैं।
Q37.Environmental Chemistry

The slow corrosion ('marble cancer') of marble monuments such as the Taj Mahal is caused when acid rain converts marble mainly into which substance?

ताजमहल जैसे संगमरमर स्मारकों का धीमा संक्षारण ('मार्बल कैंसर') तब होता है जब अम्लीय वर्षा संगमरमर को मुख्यतः किस पदार्थ में बदल देती है?

  1. A.Calcium carbonateकैल्सियम कार्बोनेट
  2. B.Calcium chlorideकैल्सियम क्लोराइड
  3. C.Calcium nitrateकैल्सियम नाइट्रेट
  4. D.Calcium sulphateकैल्सियम सल्फेट✓ Correct
Answer: D — Calcium sulphate
Marble is CaCO3; sulphuric acid in acid rain (formed from SO2 emissions) reacts with it to form calcium sulphate: CaCO3 + H2SO4 gives CaSO4 + H2O + CO2, which flakes off and disfigures the surface.संगमरमर CaCO3 है; अम्लीय वर्षा में उपस्थित सल्फ्यूरिक अम्ल (SO2 उत्सर्जन से बना) इससे अभिक्रिया करके कैल्सियम सल्फेट बनाता है: CaCO3 + H2SO4 से CaSO4 + H2O + CO2 प्राप्त होते हैं, जो झड़कर सतह को विकृत कर देता है।
Q38.Chemical Kinetics

In a multi-step (complex) reaction, the overall rate of the reaction is controlled by which step?

बहु-चरणीय (जटिल) अभिक्रिया में अभिक्रिया की समग्र दर किस चरण द्वारा नियंत्रित होती है?

  1. A.The fastest stepसबसे तेज़ चरण
  2. B.The slowest step (the rate-determining step)सबसे धीमा चरण (दर-निर्धारक चरण)✓ Correct
  3. C.Always the first stepसदैव पहला चरण
  4. D.Always the last stepसदैव अंतिम चरण
Answer: B — The slowest step (the rate-determining step)
The slowest step of a complex reaction acts as a bottleneck and determines the overall rate; it is called the rate-determining step, and the rate law is written from it.जटिल अभिक्रिया का सबसे धीमा चरण अवरोध (बॉटलनेक) का कार्य करता है और समग्र दर निर्धारित करता है; इसे दर-निर्धारक चरण कहते हैं और दर नियम उसी से लिखा जाता है।
Q39.Chemical Kinetics

For a second-order reaction, the half-life period is:

द्वितीय कोटि की अभिक्रिया के लिए अर्ध-आयु काल होता है:

  1. A.Inversely proportional to the initial concentrationप्रारंभिक सांद्रता के व्युत्क्रमानुपाती✓ Correct
  2. B.Independent of the initial concentrationप्रारंभिक सांद्रता से स्वतंत्र
  3. C.Directly proportional to the initial concentrationप्रारंभिक सांद्रता के अनुक्रमानुपाती
  4. D.Proportional to the square of the initial concentrationप्रारंभिक सांद्रता के वर्ग के समानुपाती
Answer: A — Inversely proportional to the initial concentration
For a second-order reaction, t1/2 = 1/(k[A]0), so the half-life falls as the initial concentration rises - unlike the first-order case, where it is constant.द्वितीय कोटि की अभिक्रिया के लिए t1/2 = 1/(k[A]0) होता है, इसलिए प्रारंभिक सांद्रता बढ़ने पर अर्ध-आयु घटती है - प्रथम कोटि के विपरीत, जहाँ यह स्थिर रहती है।
Q40.Equilibrium

Which buffer system mainly maintains the pH of human blood near 7.4?

मानव रक्त का pH लगभग 7.4 बनाए रखने में मुख्यतः कौन-सा बफर तंत्र कार्य करता है?

  1. A.Acetic acid / acetateऐसीटिक अम्ल / ऐसीटेट
  2. B.Ammonia / ammoniumअमोनिया / अमोनियम
  3. C.Carbonic acid / hydrogencarbonateकार्बोनिक अम्ल / हाइड्रोजनकार्बोनेट✓ Correct
  4. D.Phosphoric acid / dihydrogenphosphate onlyकेवल फॉस्फोरिक अम्ल / डाइहाइड्रोजनफॉस्फेट
Answer: C — Carbonic acid / hydrogencarbonate
Blood pH is maintained mainly by the H2CO3/HCO3− buffer system, with haemoglobin and plasma proteins playing supporting roles.रक्त का pH मुख्यतः H2CO3/HCO3− बफर तंत्र द्वारा बनाए रखा जाता है, जिसमें हीमोग्लोबिन और प्लाज़्मा प्रोटीन सहायक भूमिका निभाते हैं।
▶ Play this set online — free, with timer, score & rank
← Set 8All BPSC TRE practice setsBPSC TRE exam guide →

Get daily exam updates on Telegram

Join the SarkariManzil channel — new jobs, results, admit cards and daily current affairs, first on Telegram. Free.

Join SarkariManzil on Telegram ↗