SarkariManzil
BPSC · TRE Teacher Recruitment

BPSC TRE Physics (11–12) — Set 2

By Archit Kumar · Published: 18 October 2026 · 40 questions · English + हिंदी
BPSC TRE marking rule: +1 for a correct answer, −1/3 for a wrong answer and −1/3 for a question left blank. In the online test, choose option E (Do not attempt) to skip a question safely at 0 marks — never leave a question blank.
▶ Play this set online — free, with timer, score & rank

Read all 40 questions below with answers and explanations, or play the set online in the SarkariManzil practice app. In the app, sets unlock in order — submit Set N to open Set N+1.

Q1.Units and Dimensions

The dimensional formula of Planck's constant h (from E = hν) is:

प्लांक नियतांक h (E = hν से) की विमीय सूत्र है:

  1. A.[ML²T⁻¹][ML²T⁻¹]✓ Correct
  2. B.[ML²T⁻²][ML²T⁻²]
  3. C.[MLT⁻¹][MLT⁻¹]
  4. D.[ML³T⁻¹][ML³T⁻¹]
Answer: A — [ML²T⁻¹]
E = hν ⇒ h = E/ν. Dimensions of E are [ML²T⁻²] and of ν are [T⁻¹], so [h] = [ML²T⁻¹] — the same as angular momentum.E = hν ⇒ h = E/ν। E की विमा [ML²T⁻²] और ν की [T⁻¹] है, अतः [h] = [ML²T⁻¹] — यही कोणीय संवेग की विमा है।
Q2.Mechanics

A projectile is launched at 20 m/s at 30° to the horizontal (g = 10 m/s²). Its maximum height is:

किसी प्रक्षेप्य को क्षैतिज से 30° कोण पर 20 m/s चाल से प्रक्षेपित किया गया (g = 10 m/s²)। इसकी अधिकतम ऊँचाई है:

  1. A.5 m5 m✓ Correct
  2. B.10 m10 m
  3. C.15 m15 m
  4. D.20 m20 m
Answer: A — 5 m
H = u²sin²θ/2g = (20² × sin²30°)/(2×10) = 5 m.H = u²sin²θ/2g = (20² × sin²30°)/(2×10) = 5 m।
Q3.Mechanics

A car moving at 10 m/s accelerates uniformly at 2 m/s² for 5 s. The distance covered is:

10 m/s चाल वाली कार 2 m/s² के एकसमान त्वरण से 5 s तक चलती है। तय की गई दूरी है:

  1. A.60 m60 m
  2. B.75 m75 m✓ Correct
  3. C.100 m100 m
  4. D.125 m125 m
Answer: B — 75 m
s = ut + ½at² = 50 + 25 = 75 m.s = ut + ½at² = 50 + 25 = 75 m।
Q4.Mechanics

A block just begins to slide on a rough inclined plane when the angle of inclination is 30°. The coefficient of static friction is:

कोई गुटका खुरदरे नत तल पर ठीक तभी फिसलना शुरू करता है जब झुकाव कोण 30° हो। स्थैतिक घर्षण गुणांक है:

  1. A.1/√31/√3✓ Correct
  2. B.√3√3
  3. C.1/21/2
  4. D.11
Answer: A — 1/√3
At the angle of repose, tanθ = μ; tan30° = 1/√3.विश्राम कोण पर tanθ = μ होता है। tan30° = 1/√3।
Q5.Work, Energy and Power

A variable force F = 3x² N acts on a particle from x = 0 to x = 2 m. The work done is:

किसी कण पर x = 0 से x = 2 m तक परिवर्ती बल F = 3x² N कार्य करता है। किया गया कार्य है:

  1. A.6 J6 J
  2. B.8 J8 J✓ Correct
  3. C.12 J12 J
  4. D.16 J16 J
Answer: B — 8 J
W = ∫₀² 3x² dx = [x³]₀² = 8 J — the area under the F–x curve.W = ∫₀² 3x² dx = [x³]₀² = 8 J — यह F–x वक्र के नीचे का क्षेत्रफल है।
Q6.Rotational Motion

The moment of inertia of a thin ring of mass M and radius R about its diameter is:

द्रव्यमान M और त्रिज्या R वाली पतली वलय का उसके व्यास के परितः जड़त्व आघूर्ण है:

  1. A.MR²MR²
  2. B.MR²/2MR²/2✓ Correct
  3. C.2MR²/32MR²/3
  4. D.3MR²/23MR²/2
Answer: B — MR²/2
About the perpendicular central axis I = MR²; by the perpendicular-axis theorem, I_diameter = MR²/2.लंबवत केंद्रीय अक्ष के परितः I = MR²; लंब अक्ष प्रमेय से, I_व्यास = MR²/2।
Q7.Gravitation

Which statement about the escape velocity v_e of Earth is correct?

पृथ्वी के पलायन वेग v_e के बारे में कौन-सा कथन सत्य है?

  1. A.It depends on the mass of the projected bodyयह प्रक्षेपित पिंड के द्रव्यमान पर निर्भर करता है
  2. B.v_e = √(gR)v_e = √(gR)
  3. C.v_e = √(2gR) and is independent of the mass of the projected bodyv_e = √(2gR) और प्रक्षेपित पिंड के द्रव्यमान से स्वतंत्र है✓ Correct
  4. D.It is infinite for heavy bodiesभारी पिंडों के लिए यह अनंत होता है
Answer: C — v_e = √(2gR) and is independent of the mass of the projected body
From (1/2)mv_e² = GMm/R the mass cancels: v_e = √(2gR) ≈ 11.2 km/s, independent of the body's mass.(1/2)mv_e² = GMm/R से द्रव्यमान m कट जाता है: v_e = √(2gR) ≈ 11.2 km/s, जो पिंड के द्रव्यमान से स्वतंत्र है।
Q8.Elasticity

A steel wire (length 2 m, cross-section 1.0 mm², Y = 2.0×10¹¹ Pa) is stretched by a 100 N force. The elongation is:

एक स्टील तार (लंबाई 2 m, अनुप्रस्थ काट 1.0 mm², Y = 2.0×10¹¹ Pa) को 100 N बल से खींचा गया। वृद्धि है:

  1. A.0.5 mm0.5 mm
  2. B.1.0 mm1.0 mm✓ Correct
  3. C.2.0 mm2.0 mm
  4. D.4.0 mm4.0 mm
Answer: B — 1.0 mm
ΔL = FL/AY = 100×2/(10⁻⁶×2×10¹¹) = 10⁻³ m = 1.0 mm.ΔL = FL/AY = 100×2/(10⁻⁶×2×10¹¹) = 10⁻³ m = 1.0 mm।
Q9.Fluids

Water stands 5 m deep in a tank. The speed of efflux through a small hole at the bottom (g = 10 m/s²) is:

एक टंकी में पानी 5 m गहरा है। तली के छोटे छिद्र से निकास वेग (g = 10 m/s²) है:

  1. A.5 m/s5 m/s
  2. B.10 m/s10 m/s✓ Correct
  3. C.15 m/s15 m/s
  4. D.20 m/s20 m/s
Answer: B — 10 m/s
Torricelli's law: v = √(2gh) = 10 m/s — the same speed as free fall from height h.टॉरिसेली का नियम: v = √(2gh) = 10 m/s — यह ऊँचाई h से मुक्त पतन की चाल के बराबर है।
Q10.Oscillations

If the length of a simple pendulum is made 4 times, its time period:

यदि सरल लोलक की लंबाई 4 गुना कर दी जाए, तो इसका आवर्तकाल:

  1. A.becomes doubleदोगुना हो जाता है✓ Correct
  2. B.becomes halfआधा हो जाता है
  3. C.becomes four timesचार गुना हो जाता है
  4. D.remains unchangedअपरिवर्तित रहता है
Answer: A — becomes double
T = 2π√(l/g), so T ∝ √l; length ×4 ⇒ T ×2.T = 2π√(l/g), अतः T ∝ √l। लंबाई ×4 ⇒ T ×2।
Q11.Oscillations

A particle of mass m executes SHM with amplitude A and angular frequency ω. Its total mechanical energy is:

द्रव्यमान m का कण आयाम A और कोणीय आवृत्ति ω से सरल आवर्त गति करता है। इसकी कुल यांत्रिक ऊर्जा है:

  1. A.(1/2)mωA²(1/2)mωA²
  2. B.(1/2)mω²A²(1/2)mω²A²✓ Correct
  3. C.mω²A²mω²A²
  4. D.(1/4)mω²A²(1/4)mω²A²
Answer: B — (1/2)mω²A²
Total energy = maximum kinetic energy = (1/2)m(ωA)² = (1/2)mω²A², conserved throughout.कुल ऊर्जा = अधिकतम गतिज ऊर्जा = (1/2)mω²A², जो गति भर संरक्षित रहती है।
Q12.Waves

A sound source moves towards a stationary observer. The apparent frequency heard:

कोई ध्वनि स्रोत स्थिर प्रेक्षक की ओर बढ़ता है। सुनाई देने वाली आभासी आवृत्ति:

  1. A.decreasesघट जाती है
  2. B.increasesबढ़ जाती है✓ Correct
  3. C.remains the sameवही रहती है
  4. D.becomes zeroशून्य हो जाती है
Answer: B — increases
Doppler effect: f' = f·v/(v − v_s) > f because wavefronts crowd together.डॉप्लर प्रभाव: f' = f·v/(v − v_s) > f, क्योंकि तरंगाग्र पास-पास आ जाते हैं।
Q13.Kinetic Theory

The rms speed of oxygen molecules at 300 K is approximately:

300 K पर ऑक्सीजन अणुओं की वर्ग-माध्य-मूल चाल लगभग है:

  1. A.484 m/s484 m/s✓ Correct
  2. B.340 m/s340 m/s
  3. C.1240 m/s1240 m/s
  4. D.1660 m/s1660 m/s
Answer: A — 484 m/s
v_rms = √(3RT/M) = √(3×8.31×300/0.032) ≈ 484 m/s.v_rms = √(3RT/M) ≈ 484 m/s।
Q14.Thermodynamics

A Carnot engine works between 500 K and 300 K. Its efficiency is:

एक कार्नो इंजन 500 K और 300 K के बीच कार्य करता है। इसकी दक्षता है:

  1. A.30%30%
  2. B.40%40%✓ Correct
  3. C.60%60%
  4. D.67%67%
Answer: B — 40%
η = 1 − T₂/T₁ = 1 − 300/500 = 40% — the maximum possible between these temperatures.η = 1 − T₂/T₁ = 40% — इन तापों के बीच अधिकतम संभव दक्षता।
Q15.Thermodynamics

In the first law of thermodynamics, if ΔQ is the heat supplied to the system and ΔW the work done BY the system, then:

ऊष्मागतिकी के प्रथम नियम में, यदि ΔQ निकाय को दी गई ऊष्मा है और ΔW निकाय द्वारा किया गया कार्य है, तो:

  1. A.ΔQ = ΔU − ΔWΔQ = ΔU − ΔW
  2. B.ΔQ = ΔU + ΔWΔQ = ΔU + ΔW✓ Correct
  3. C.ΔU = ΔQ + ΔWΔU = ΔQ + ΔW
  4. D.ΔW = ΔU + ΔQΔW = ΔU + ΔQ
Answer: B — ΔQ = ΔU + ΔW
Energy conservation: heat supplied = increase in internal energy + work done by the system.ऊर्जा संरक्षण: दी गई ऊष्मा = आंतरिक ऊर्जा में वृद्धि + निकाय द्वारा किया कार्य।
Q16.Electrostatics

The distance between two point charges is tripled. The electrostatic force between them becomes:

दो बिंदु आवेशों के बीच की दूरी 3 गुना कर दी गई। उनके बीच स्थिरवैद्युत बल हो जाता है:

  1. A.3 times3 गुना
  2. B.1/3 times1/3 गुना
  3. C.1/9 times1/9 गुना✓ Correct
  4. D.9 times9 गुना
Answer: C — 1/9 times
Coulomb's law: F ∝ 1/r²; distance ×3 ⇒ F ×1/9.कूलॉम नियम: F ∝ 1/r²। दूरी ×3 ⇒ F ×1/9।
Q17.Electrostatics

A 10 μF capacitor is charged to 12 V. The energy stored in it is:

एक 10 μF संधारित्र को 12 V तक आवेशित किया गया। इसमें संचित ऊर्जा है:

  1. A.360 μJ360 μJ
  2. B.720 μJ720 μJ✓ Correct
  3. C.1440 μJ1440 μJ
  4. D.120 μJ120 μJ
Answer: B — 720 μJ
U = ½CV² = ½×10×10⁻⁶×144 = 720 μJ.U = ½CV² = 720 μJ।
Q18.Electrostatics

Two 6 μF capacitors are connected in series. The equivalent capacitance is:

दो 6 μF संधारित्र श्रेणीक्रम में जोड़े गए। तुल्य धारिता है:

  1. A.12 μF12 μF
  2. B.6 μF6 μF
  3. C.3 μF3 μF✓ Correct
  4. D.2 μF2 μF
Answer: C — 3 μF
1/C = 1/6 + 1/6 = 1/3 ⇒ C = 3 μF.1/C = 1/6 + 1/6 = 1/3 ⇒ C = 3 μF।
Q19.Electrostatics

The electric field at an axial point of a short electric dipole (dipole moment p, distance r) is:

लघु विद्युत द्विध्रुव (द्विध्रुव आघूर्ण p, दूरी r) के अक्षीय बिंदु पर विद्युत क्षेत्र है:

  1. A.kp/r²kp/r²
  2. B.2kp/r³2kp/r³✓ Correct
  3. C.kp/r³kp/r³
  4. D.2kp/r²2kp/r²
Answer: B — 2kp/r³
On the axis, E = 2kp/r³ along the dipole moment; it falls as 1/r³.अक्ष पर E = 2kp/r³, द्विध्रुव आघूर्ण की दिशा में; 1/r³ से घटता है।
Q20.Current Electricity

A Wheatstone bridge is balanced when:

व्हीटस्टोन सेतु संतुलित होता है जब:

  1. A.P + Q = R + SP + Q = R + S
  2. B.P/Q = R/SP/Q = R/S✓ Correct
  3. C.PQ = RSPQ = RS
  4. D.P/Q = S/RP/Q = S/R
Answer: B — P/Q = R/S
Null deflection occurs when the resistance ratios of the two arms are equal.गैल्वेनोमीटर में शून्य विक्षेप तब होता है जब दोनों भुजाओं के प्रतिरोधों का अनुपात बराबर हो।
Q21.Current Electricity

A potentiometer measures the emf of a cell accurately because:

विभवमापी से सेल का विद्युत वाहक बल सटीकता से मापा जाता है क्योंकि:

  1. A.it has a very long wireइसका तार बहुत लंबा होता है
  2. B.at the null point no current is drawn from the cellशून्य बिंदु पर सेल से कोई धारा नहीं ली जाती✓ Correct
  3. C.it uses a standard cellयह मानक सेल का उपयोग करता है
  4. D.its resistance is very highइसका प्रतिरोध बहुत अधिक होता है
Answer: B — at the null point no current is drawn from the cell
At balance no current flows through the cell — the true emf, not terminal voltage, is measured.संतुलन पर सेल से कोई धारा नहीं बहती — वास्तविक वि.वा.ब. मापा जाता है।
Q22.Magnetism

The magnetic field at the centre of a circular loop of radius R carrying current I is:

त्रिज्या R के वृत्तीय पाश (धारा I) के केंद्र पर चुंबकीय क्षेत्र है:

  1. A.μ₀I/2Rμ₀I/2R✓ Correct
  2. B.μ₀I/Rμ₀I/R
  3. C.μ₀I/4Rμ₀I/4R
  4. D.2μ₀I/R2μ₀I/R
Answer: A — μ₀I/2R
From Biot–Savart law: B = μ₀I/2R, along the axis by the right-hand rule.बायो-सावर्ट नियम से: B = μ₀I/2R, दिशा दाएँ-हाथ नियम से अक्ष के अनुदिश।
Q23.Magnetism

In a cyclotron, the frequency of revolution of a non-relativistic charged particle is:

साइक्लोट्रॉन में अनापेक्षिकीय आवेशित कण की परिक्रमण आवृत्ति है:

  1. A.qB/2πmqB/2πm✓ Correct
  2. B.qB/mqB/m
  3. C.2πm/qB2πm/qB
  4. D.mv/qBmv/qB
Answer: A — qB/2πm
qvB = mv²/r gives f = qB/2πm — independent of speed and radius (resonance condition).qvB = mv²/r से f = qB/2πm — चाल और त्रिज्या से स्वतंत्र (अनुनाद शर्त)।
Q24.Electromagnetic Induction

The flux through a 100-turn coil changes from 0.5 Wb to 0.1 Wb in 0.2 s. The magnitude of the induced emf is:

100 फेरों वाली कुंडली से बद्ध फ्लक्स 0.2 s में 0.5 Wb से 0.1 Wb हो जाता है। प्रेरित वि.वा.ब. का परिमाण है:

  1. A.40 V40 V
  2. B.100 V100 V
  3. C.200 V200 V✓ Correct
  4. D.400 V400 V
Answer: C — 200 V
|ε| = N|ΔΦ/Δt| = 100×0.4/0.2 = 200 V (Faraday's law).|ε| = N|ΔΦ/Δt| = 200 V (फैराडे का नियम)।
Q25.Electromagnetic Induction

Lenz's law states that the direction of the induced current is such that it:

लेंज का नियम कहता है कि प्रेरित धारा की दिशा ऐसी होती है कि वह:

  1. A.aids the change in magnetic fluxफ्लक्स परिवर्तन में सहायता करती है
  2. B.opposes the change in magnetic fluxफ्लक्स परिवर्तन का विरोध करती है✓ Correct
  3. C.is always clockwiseहमेशा दक्षिणावर्त होती है
  4. D.is independent of the flux changeफ्लक्स परिवर्तन से स्वतंत्र होती है
Answer: B — opposes the change in magnetic flux
The induced current's field opposes the flux change producing it — energy conservation.प्रेरित धारा का क्षेत्र उसे उत्पन्न करने वाले फ्लक्स परिवर्तन का विरोध करता है — ऊर्जा संरक्षण।
Q26.Alternating Current

In a series LCR circuit at resonance, the power factor is:

श्रेणी LCR परिपथ में अनुनाद की स्थिति में शक्ति गुणांक है:

  1. A.00
  2. B.0.50.5
  3. C.11✓ Correct
  4. D.infiniteअनंत
Answer: C — 1
At resonance X_L = X_C, impedance is purely resistive and V and I are in phase: cosφ = 1.अनुनाद पर X_L = X_C, प्रतिबाधा शुद्ध प्रतिरोधी और V–I समकला में: cosφ = 1।
Q27.Ray Optics

An object is placed 30 cm in front of a convex lens of focal length 20 cm. The image is formed at:

20 cm फोकस दूरी वाले उत्तल लेंस के सामने 30 cm पर वस्तु रखी है। प्रतिबिंब बनता है:

  1. A.60 cm, real and inverted60 cm, वास्तविक और उल्टा✓ Correct
  2. B.12 cm, virtual and erect12 cm, आभासी और सीधा
  3. C.60 cm, virtual and erect60 cm, आभासी और सीधा
  4. D.30 cm, real and inverted30 cm, वास्तविक और उल्टा
Answer: A — 60 cm, real and inverted
1/v = 1/20 − 1/30 = 1/60 ⇒ v = 60 cm — real, inverted, magnified.1/v = 1/20 − 1/30 = 1/60 ⇒ v = 60 cm — वास्तविक, उल्टा, आवर्धित।
Q28.Ray Optics

The critical angle for glass of refractive index 1.5 is approximately:

अपवर्तनांक 1.5 वाले काँच का क्रांतिक कोण लगभग है:

  1. A.30°30°
  2. B.42°42°✓ Correct
  3. C.49°49°
  4. D.60°60°
Answer: B — 42°
sin c = 1/n = 0.667 ⇒ c ≈ 41.8° ≈ 42°.sin c = 1/n = 0.667 ⇒ c ≈ 41.8° ≈ 42°।
Q29.Wave Optics

In Young's double-slit experiment, if the distance between the slits and the screen is doubled, the fringe width:

यंग के द्विझिरी प्रयोग में यदि झिरियों और पर्दे के बीच की दूरी दोगुनी कर दी जाए, तो फ्रिंज चौड़ाई:

  1. A.is halvedआधी हो जाती है
  2. B.is doubledदोगुनी हो जाती है✓ Correct
  3. C.becomes four timesचार गुनी हो जाती है
  4. D.remains unchangedअपरिवर्तित रहती है
Answer: B — is doubled
Fringe width β = λD/d, so β ∝ D.फ्रिंज चौड़ाई β = λD/d, अतः β ∝ D।
Q30.Dual Nature

The work function of a metal is 2.0 eV. Its threshold wavelength is approximately (hc = 1240 eV·nm):

किसी धातु का कार्य फलन 2.0 eV है। इसकी देहली तरंगदैर्घ्य लगभग है (hc = 1240 eV·nm):

  1. A.310 nm310 nm
  2. B.620 nm620 nm✓ Correct
  3. C.1240 nm1240 nm
  4. D.2480 nm2480 nm
Answer: B — 620 nm
λ₀ = hc/φ = 1240/2.0 = 620 nm; longer wavelengths cannot eject electrons.λ₀ = hc/φ = 620 nm। इससे लंबी तरंगदैर्घ्य का प्रकाश इलेक्ट्रॉन नहीं निकाल सकता।
Q31.Dual Nature

An electron is accelerated through 100 V. Its de Broglie wavelength is approximately:

एक इलेक्ट्रॉन को 100 V से त्वरित किया गया। इसकी द-ब्रॉग्ली तरंगदैर्घ्य लगभग है:

  1. A.0.12 nm0.12 nm✓ Correct
  2. B.1.2 nm1.2 nm
  3. C.0.012 nm0.012 nm
  4. D.12 nm12 nm
Answer: A — 0.12 nm
λ = 1.227/√V nm = 1.227/10 ≈ 0.12 nm.λ = 1.227/√V nm ≈ 0.12 nm।
Q32.Atoms

The energy of the electron in the n = 2 orbit of a hydrogen atom is:

हाइड्रोजन परमाणु की n = 2 कक्षा में इलेक्ट्रॉन की ऊर्जा है:

  1. A.−13.6 eV−13.6 eV
  2. B.−3.4 eV−3.4 eV✓ Correct
  3. C.−1.51 eV−1.51 eV
  4. D.−0.85 eV−0.85 eV
Answer: B — −3.4 eV
E_n = −13.6/n² eV, so E₂ = −3.4 eV.E_n = −13.6/n² eV, अतः E₂ = −3.4 eV।
Q33.Nuclei

The half-life of a radioactive sample is 4 h. The fraction remaining after 12 h is:

किसी रेडियोधर्मी नमूने की अर्ध-आयु 4 h है। 12 h बाद शेष भाग है:

  1. A.1/21/2
  2. B.1/41/4
  3. C.1/81/8✓ Correct
  4. D.1/161/16
Answer: C — 1/8
12 h = 3 half-lives ⇒ (1/2)³ = 1/8.12 h = 3 अर्ध-आयु ⇒ (1/2)³ = 1/8।
Q34.Nuclei

The binding energy per nucleon is maximum for nuclei with mass number around:

प्रति न्यूक्लिऑन बंधन ऊर्जा अधिकतम होती है उन नाभिकों के लिए जिनकी द्रव्यमान संख्या लगभग है:

  1. A.4 (He-4)4 (He-4)
  2. B.56 (Fe-56)56 (Fe-56)✓ Correct
  3. C.12 (C-12)12 (C-12)
  4. D.235 (U-235)235 (U-235)
Answer: B — 56 (Fe-56)
The curve peaks near A ≈ 56 (iron region) — why both fusion and fission release energy.वक्र A ≈ 56 (लौह क्षेत्र) के पास शिखर पर है — इसीलिए संलयन और विखंडन दोनों से ऊर्जा निकलती है।
Q35.Semiconductors

When a p-n junction is forward biased:

जब p-n संधि पर अग्र अभिनति लगाई जाती है:

  1. A.the depletion width increases and no current flowsअवक्षय चौड़ाई बढ़ती है और कोई धारा नहीं बहती
  2. B.the depletion width decreases and a large current flowsअवक्षय चौड़ाई घटती है और बड़ी धारा बहती है✓ Correct
  3. C.the barrier potential increasesविभव प्राचीर बढ़ता है
  4. D.the junction breaks down immediatelyसंधि तुरंत भंजित हो जाती है
Answer: B — the depletion width decreases and a large current flows
Forward bias pushes majority carriers across, shrinking the depletion region and lowering the barrier.अग्र अभिनति बहुसंख्यक वाहकों को संधि के पार धकेलती है, अवक्षय क्षेत्र सिकुड़ता है और प्राचीर घटता है।
Q36.Semiconductors

In a NAND gate, if both inputs are 1, the output is:

NAND गेट में यदि दोनों निवेश 1 हों, तो निर्गत है:

  1. A.11
  2. B.00✓ Correct
  3. C.undefinedअपरिभाषित
  4. D.same as inputनिवेश के समान
Answer: B — 0
NAND = NOT(AND); AND(1,1) = 1, complement is 0 — the only input combination giving 0.NAND = NOT(AND)। (1,1) का AND 1 है और उसका पूरक 0 — यही एकमात्र ऐसा निवेश संयोजन है।
Q37.Semiconductors

A Zener diode is mainly used as a:

ज़ेनर डायोड का मुख्य उपयोग है:

  1. A.rectifierदिष्टकारी
  2. B.voltage regulatorवोल्टेज नियामक✓ Correct
  3. C.amplifierप्रवर्धक
  4. D.oscillatorदोलित्र
Answer: B — voltage regulator
In reverse breakdown it holds a nearly constant voltage, regulating the load voltage.पश्च भंजन में यह लगभग नियत वोल्टेज रखता है, जिससे लोड वोल्टेज नियमित रहता है।
Q38.Current Electricity

Kirchhoff's voltage law is a consequence of:

किरचॉफ का वोल्टेज नियम किसका परिणाम है:

  1. A.conservation of chargeआवेश संरक्षण
  2. B.conservation of energyऊर्जा संरक्षण✓ Correct
  3. C.conservation of momentumसंवेग संरक्षण
  4. D.conservation of massद्रव्यमान संरक्षण
Answer: B — conservation of energy
ΣV = 0 around a loop — a charge gains as much energy as it loses; KCL is charge conservation.पाश में ΣV = 0 — आवेश उतनी ही ऊर्जा पाता है जितनी खोता है; KCL आवेश संरक्षण है।
Q39.Alternating Current

The core of a transformer is laminated in order to:

ट्रांसफार्मर का क्रोड पटलित बनाया जाता है ताकि:

  1. A.increase the magnetic fluxचुंबकीय फ्लक्स बढ़ाया जा सके
  2. B.reduce eddy current lossesभंवर धारा हानियाँ घटाई जा सकें✓ Correct
  3. C.increase the output voltageनिर्गत वोल्टेज बढ़ाया जा सके
  4. D.reduce copper lossesताम्र हानियाँ घटाई जा सकें
Answer: B — reduce eddy current losses
Laminations break up eddy-current paths, greatly reducing I²R heating loss.पटलें भंवर धाराओं के पथ तोड़ देती हैं, जिससे I²R ऊष्मा हानि बहुत घट जाती है।
Q40.Current Electricity

In a copper wire carrying a current of 1 A, the drift velocity of electrons is of the order of:

1 A धारा वाले ताँबे के तार में इलेक्ट्रॉनों का अनुगमन वेग किस कोटि का है:

  1. A.10⁻⁴ m/s10⁻⁴ m/s✓ Correct
  2. B.10⁻¹ m/s10⁻¹ m/s
  3. C.10⁶ m/s10⁶ m/s
  4. D.3×10⁸ m/s3×10⁸ m/s
Answer: A — 10⁻⁴ m/s
v_d = I/neA ≈ 10⁻⁴ m/s — the signal travels near light speed, but electrons drift very slowly.v_d = I/neA ≈ 10⁻⁴ m/s — विद्युत संकेत लगभग प्रकाश चाल से जाता है, पर इलेक्ट्रॉन बहुत धीरे अनुगमन करते हैं।
▶ Play this set online — free, with timer, score & rank
← Set 1All BPSC TRE practice setsSet 3 →BPSC TRE exam guide →

Get daily exam updates on Telegram

Join the SarkariManzil channel — new jobs, results, admit cards and daily current affairs, first on Telegram. Free.

Join SarkariManzil on Telegram ↗