SarkariManzil
BPSC · TRE Teacher Recruitment

BPSC TRE Chemistry Set 5

By Archit Kumar · Published: 18 October 2026 · 40 questions · English + हिंदी
BPSC TRE marking rule: +1 for a correct answer, −1/3 for a wrong answer and −1/3 for a question left blank. In the online test, choose option E (Do not attempt) to skip a question safely at 0 marks — never leave a question blank.
▶ Play this set online — free, with timer, score & rank

Read all 40 questions below with answers and explanations, or play the set online in the SarkariManzil practice app. In the app, sets unlock in order — submit Set N to open Set N+1.

Q1.Atomic Structure

For an electron in a 3d orbital, the value of the azimuthal quantum number (l) is:

3d कक्षक में किसी इलेक्ट्रॉन के लिए दिगंशीय क्वांटम संख्या (l) का मान है:

  1. A.00
  2. B.22✓ Correct
  3. C.11
  4. D.33
Answer: B — 2
For any orbital, l = 0 for s, 1 for p, 2 for d and 3 for f, whatever the shell. A 3d electron therefore has l = 2.किसी भी कक्षक के लिए l का मान s के लिए 0, p के लिए 1, d के लिए 2 और f के लिए 3 होता है, कोश कोई भी हो। अतः 3d इलेक्ट्रॉन के लिए l = 2 है।
Q2.Some Basic Concepts

How many moles of solute are present in 500 mL of a 0.2 M solution?

0.2 M विलयन के 500 mL में विलेय के कितने मोल उपस्थित हैं?

  1. A.0.2 mol0.2 मोल
  2. B.0.1 mol0.1 मोल✓ Correct
  3. C.0.4 mol0.4 मोल
  4. D.1.0 mol1.0 मोल
Answer: B — 0.1 mol
Moles = molarity × volume in litres = 0.2 × 0.5 = 0.1 mol.मोल = मोलरता × आयतन (लीटर में) = 0.2 × 0.5 = 0.1 मोल।
Q3.Atomic Structure

Which series of lines in the hydrogen spectrum lies in the visible region?

हाइड्रोजन स्पेक्ट्रम की कौन-सी श्रेणी दृश्य क्षेत्र में आती है?

  1. A.Balmer seriesबामर श्रेणी✓ Correct
  2. B.Lyman seriesलाइमन श्रेणी
  3. C.Paschen seriesपाश्चन श्रेणी
  4. D.Pfund seriesफुंड श्रेणी
Answer: A — Balmer series
The Balmer series (transitions to n = 2) falls in the visible region; Lyman is in the ultraviolet and Paschen/Pfund are in the infrared.बामर श्रेणी (n = 2 पर संक्रमण) दृश्य क्षेत्र में आती है; लाइमन पराबैंगनी में और पाश्चन/फुंड अवरक्त क्षेत्र में आती हैं।
Q4.Atomic Structure

According to Heisenberg's uncertainty principle, it is impossible to determine simultaneously the exact position and the exact ___ of an electron.

हाइज़ेनबर्ग के अनिश्चितता सिद्धांत के अनुसार, इलेक्ट्रॉन की यथार्थ स्थिति और यथार्थ ___ का एक साथ निर्धारण असंभव है।

  1. A.Energyऊर्जा
  2. B.Chargeआवेश
  3. C.Momentumसंवेग✓ Correct
  4. D.Spinचक्रण
Answer: C — Momentum
Heisenberg's principle concerns position and momentum: the more exactly one is known, the less exactly the other can be known.हाइज़ेनबर्ग का सिद्धांत स्थिति और संवेग से जुड़ा है: एक को जितनी यथार्थता से जाना जाएगा, दूसरे को उतनी ही कम यथार्थता से जाना जा सकेगा।
Q5.Periodic Table

Which of the following elements has the highest first ionisation enthalpy?

निम्नलिखित में से किस तत्व की प्रथम आयनन एन्थैल्पी सबसे अधिक है?

  1. A.Fluorineफ्लुओरीन
  2. B.Heliumहीलियम✓ Correct
  3. C.Neonनिऑन
  4. D.Oxygenऑक्सीजन
Answer: B — Helium
Helium has the highest first ionisation enthalpy of all elements — its two electrons are in the small 1s shell, held very close to the nucleus with no shielding.हीलियम की प्रथम आयनन एन्थैल्पी सभी तत्वों में सबसे अधिक है — इसके दोनों इलेक्ट्रॉन छोटे 1s कोश में नाभिक के बहुत निकट होते हैं और कोई परिरक्षण नहीं होता।
Q6.Periodic Table

Which of the following elements is a metalloid?

निम्नलिखित में से कौन-सा तत्व उपधातु है?

  1. A.Sodiumसोडियम
  2. B.Siliconसिलिकॉन✓ Correct
  3. C.Sulphurसल्फर
  4. D.Aluminiumऐलुमिनियम
Answer: B — Silicon
Silicon shows properties intermediate between metals and non-metals, so it is a metalloid (semimetal). Sodium and aluminium are metals; sulphur is a non-metal.सिलिकॉन धातुओं और अधातुओं के बीच के गुण दर्शाता है, अतः यह उपधातु है। सोडियम और ऐलुमिनियम धातुएँ हैं; सल्फर अधातु है।
Q7.Chemical Bonding

The shape of the SF₄ molecule is:

SF₄ अणु की आकृति है:

  1. A.Tetrahedralचतुष्फलकीय
  2. B.Square planarवर्ग समतलीय
  3. C.Trigonal planarत्रिकोणीय समतलीय
  4. D.See-sawझूला-आकृति (सी-सॉ)✓ Correct
Answer: D — See-saw
SF₄ has 5 electron pairs (4 bonding + 1 lone pair) around sulphur in a trigonal-bipyramidal arrangement; the lone pair occupies an equatorial position, giving a see-saw shape.SF₄ में सल्फर के चारों ओर 5 इलेक्ट्रॉन-युग्म (4 आबंधी + 1 एकाकी) त्रिकोणीय द्विपिरामिडी व्यवस्था में होते हैं; एकाकी युग्म विषुवतीय स्थान लेता है, जिससे झूला-आकृति बनती है।
Q8.Chemical Bonding

The hybridisation of the boron atom in BF₃ is:

BF₃ में बोरॉन परमाणु का संकरण है:

  1. A.spsp
  2. B.sp³sp³
  3. C.sp²sp²✓ Correct
  4. D.sp³dsp³d
Answer: C — sp²
Boron in BF₃ forms three sigma bonds with no lone pair, so it is sp² hybridised and the molecule is trigonal planar.BF₃ में बोरॉन तीन सिग्मा आबंध बनाता है और उस पर कोई एकाकी युग्म नहीं होता, अतः वह sp² संकरित है और अणु त्रिकोणीय समतलीय है।
Q9.Thermodynamics

The standard enthalpy of neutralisation of a strong acid by a strong base is approximately:

किसी प्रबल अम्ल की प्रबल क्षार द्वारा उदासीनीकरण एन्थैल्पी लगभग होती है:

  1. A.−13.7 kJ/mol−13.7 kJ/mol
  2. B.−25.5 kJ/mol−25.5 kJ/mol
  3. C.−98.5 kJ/mol−98.5 kJ/mol
  4. D.−57.1 kJ/mol−57.1 kJ/mol✓ Correct
Answer: D — −57.1 kJ/mol
For any strong acid–strong base pair the reaction is essentially H⁺ + OH⁻ → H₂O, so the enthalpy of neutralisation is constant at about −57.1 kJ/mol.किसी भी प्रबल अम्ल–प्रबल क्षार युग्म के लिए अभिक्रिया मूलतः H⁺ + OH⁻ → H₂O होती है, अतः उदासीनीकरण एन्थैल्पी लगभग −57.1 kJ/mol स्थिर रहती है।
Q10.Thermodynamics

For the change H₂O(l) → H₂O(g) at 100°C and 1 atm pressure, the Gibbs free energy change (ΔG) is:

100°C और 1 atm दाब पर H₂O(l) → H₂O(g) परिवर्तन के लिए गिब्स मुक्त ऊर्जा परिवर्तन (ΔG) है:

  1. A.Positiveधनात्मक
  2. B.Negativeऋणात्मक
  3. C.Equal to ΔHΔH के बराबर
  4. D.Zeroशून्य✓ Correct
Answer: D — Zero
At 100°C and 1 atm, liquid water and steam are in equilibrium, and for any change at equilibrium ΔG = 0.100°C और 1 atm पर द्रव जल और भाप साम्यावस्था में होते हैं, और साम्यावस्था पर किसी भी परिवर्तन के लिए ΔG = 0 होता है।
Q11.Equilibrium

An inert gas is introduced, at constant volume, into a vessel containing a gaseous reaction mixture already at equilibrium. The effect on the position of equilibrium is:

स्थिर आयतन पर, साम्यावस्था में पहले से मौजूद गैसीय अभिक्रिया मिश्रण वाले पात्र में एक अक्रिय गैस मिलाई जाती है। साम्यावस्था की स्थिति पर इसका प्रभाव होता है:

  1. A.It shifts towards the side with more molesयह अधिक मोलों वाली दिशा में विस्थापित होती है
  2. B.No shift in either directionकिसी भी दिशा में कोई विस्थापन नहीं✓ Correct
  3. C.It shifts towards the side with fewer molesयह कम मोलों वाली दिशा में विस्थापित होती है
  4. D.The equilibrium constant increasesसाम्य स्थिरांक बढ़ जाता है
Answer: B — No shift in either direction
At constant volume, adding an inert gas does not change the partial pressures (concentrations) of the reacting gases, so the reaction quotient is unchanged and the equilibrium does not shift.स्थिर आयतन पर अक्रिय गैस मिलाने से अभिकारी गैसों के आंशिक दाब (सांद्रताएँ) नहीं बदलते, अतः अभिक्रिया भागफल अपरिवर्तित रहता है और साम्यावस्था विस्थापित नहीं होती।
Q12.Equilibrium

The pH of a 0.01 M NaOH solution at 25°C is:

25°C पर 0.01 M NaOH विलयन का pH है:

  1. A.22
  2. B.1010
  3. C.1212✓ Correct
  4. D.1313
Answer: C — 12
[OH⁻] = 0.01 = 10⁻², so pOH = 2 and pH = 14 − 2 = 12.[OH⁻] = 0.01 = 10⁻², अतः pOH = 2 और pH = 14 − 2 = 12।
Q13.Equilibrium

An aqueous solution of ammonium chloride (NH₄Cl) is:

अमोनियम क्लोराइड (NH₄Cl) का जलीय विलयन होता है:

  1. A.Acidicअम्लीय✓ Correct
  2. B.Neutralउदासीन
  3. C.Basicक्षारीय
  4. D.Amphotericउभयधर्मी
Answer: A — Acidic
NH₄Cl is a salt of a strong acid (HCl) and a weak base (NH₄OH); its hydrolysis produces an acidic solution.NH₄Cl प्रबल अम्ल (HCl) और दुर्बल क्षार (NH₄OH) का लवण है; इसके जल-अपघटन से अम्लीय विलयन बनता है।
Q14.Equilibrium

The solubility of AgCl (Ksp = 1.8 × 10⁻¹⁰) in pure water at 25°C is approximately:

25°C पर शुद्ध जल में AgCl (Ksp = 1.8 × 10⁻¹⁰) की विलेयता लगभग है:

  1. A.1.34 × 10⁻⁵ mol/L1.34 × 10⁻⁵ mol/L✓ Correct
  2. B.1.8 × 10⁻¹⁰ mol/L1.8 × 10⁻¹⁰ mol/L
  3. C.9.0 × 10⁻¹¹ mol/L9.0 × 10⁻¹¹ mol/L
  4. D.3.6 × 10⁻⁵ mol/L3.6 × 10⁻⁵ mol/L
Answer: A — 1.34 × 10⁻⁵ mol/L
For AgCl, solubility s = √Ksp = √(1.8 × 10⁻¹⁰) ≈ 1.34 × 10⁻⁵ mol/L.AgCl के लिए विलेयता s = √Ksp = √(1.8 × 10⁻¹⁰) ≈ 1.34 × 10⁻⁵ mol/L।
Q15.Redox Reactions

The average oxidation number of sulphur in sodium thiosulphate (Na₂S₂O₃) is:

सोडियम थायोसल्फेट (Na₂S₂O₃) में सल्फर की औसत ऑक्सीकरण संख्या है:

  1. A.−2−2
  2. B.+4+4
  3. C.+6+6
  4. D.+2+2✓ Correct
Answer: D — +2
2(+1) + 2x + 3(−2) = 0 gives 2x = +4, so the average oxidation number of sulphur is +2. (The two sulphur atoms are actually in different environments.)2(+1) + 2x + 3(−2) = 0 से 2x = +4 मिलता है, अतः सल्फर की औसत ऑक्सीकरण संख्या +2 है। (वास्तव में दोनों सल्फर परमाणु भिन्न पर्यावरणों में होते हैं।)
Q16.Electrochemistry

One Faraday of electric charge is approximately equal to:

एक फैराडे विद्युत आवेश लगभग बराबर होता है:

  1. A.6.022 × 10²³ C6.022 × 10²³ C
  2. B.1.6 × 10⁻¹⁹ C1.6 × 10⁻¹⁹ C
  3. C.96500 C96500 C✓ Correct
  4. D.9650 C9650 C
Answer: C — 96500 C
One Faraday is the charge carried by one mole of electrons: 6.022 × 10²³ × 1.602 × 10⁻¹⁹ ≈ 96500 C.एक फैराडे एक मोल इलेक्ट्रॉनों द्वारा वहन किया गया आवेश है: 6.022 × 10²³ × 1.602 × 10⁻¹⁹ ≈ 96500 C।
Q17.Electrochemistry

In a dry cell (Leclanché cell), the anode is made of:

शुष्क सेल (लेक्लांशे सेल) में ऐनोड बना होता है:

  1. A.Graphite rodग्रेफाइट छड़
  2. B.Manganese dioxideमैंगनीज़ डाइऑक्साइड
  3. C.Ammonium chloride pasteअमोनियम क्लोराइड का लेप
  4. D.Zinc (the outer container)जस्ता (बाहरी पात्र)✓ Correct
Answer: D — Zinc (the outer container)
In a dry cell the zinc container itself acts as the anode; the graphite rod is the cathode, surrounded by MnO₂.शुष्क सेल में जस्ते का पात्र स्वयं ऐनोड का कार्य करता है; ग्रेफाइट छड़ कैथोड होती है, जिसके चारों ओर MnO₂ होता है।
Q18.Electrochemistry

Among the following, the strongest reducing agent in aqueous solution is:

निम्नलिखित में से जलीय विलयन में सबसे प्रबल अपचायक है:

  1. A.Sodiumसोडियम
  2. B.Potassiumपोटैशियम
  3. C.Lithiumलीथियम✓ Correct
  4. D.Rubidiumरुबिडियम
Answer: C — Lithium
Lithium has the most negative standard electrode potential (−3.04 V), because the very high hydration enthalpy of the small Li⁺ ion more than compensates for its ionisation enthalpy — so Li is the strongest reducing agent in aqueous solution.लीथियम का मानक इलेक्ट्रोड विभव सबसे अधिक ऋणात्मक (−3.04 V) है, क्योंकि छोटे Li⁺ आयन की अत्यधिक जलयोजन एन्थैल्पी उसकी आयनन एन्थैल्पी की भरपाई से अधिक हो जाती है — अतः जलीय विलयन में Li सबसे प्रबल अपचायक है।
Q19.Chemical Kinetics

For most chemical reactions, the rate approximately becomes ___ when the temperature is raised by 10 K.

अधिकांश रासायनिक अभिक्रियाओं के लिए, ताप 10 K बढ़ाने पर दर लगभग ___ हो जाती है।

  1. A.Doubleदोगुनी✓ Correct
  2. B.Halfआधी
  3. C.Four timesचार गुनी
  4. D.Ten timesदस गुनी
Answer: A — Double
The temperature coefficient of most reactions is about 2 (2–3), i.e., the rate roughly doubles for every 10 K rise in temperature because many more molecules cross the activation-energy barrier.अधिकांश अभिक्रियाओं का ताप गुणांक लगभग 2 (2–3) होता है, अर्थात् ताप में प्रत्येक 10 K वृद्धि पर दर लगभग दोगुनी हो जाती है, क्योंकि बहुत अधिक अणु सक्रियण-ऊर्जा की बाधा पार कर लेते हैं।
Q20.Solutions

The van't Hoff factor (i) for a dilute aqueous solution of NaCl is approximately:

NaCl के तनु जलीय विलयन के लिए वांट हॉफ गुणक (i) लगभग है:

  1. A.11
  2. B.33
  3. C.22✓ Correct
  4. D.0.50.5
Answer: C — 2
NaCl dissociates almost completely into Na⁺ and Cl⁻, giving two particles per formula unit, so i ≈ 2.NaCl लगभग पूर्णतः Na⁺ और Cl⁻ में वियोजित हो जाता है, जिससे प्रति सूत्र-इकाई दो कण मिलते हैं, अतः i ≈ 2।
Q21.Solutions

The osmotic pressure (π) of a dilute solution is given by:

तनु विलयन का परासरण दाब (π) दिया जाता है:

  1. A.π = C/RTπ = C/RT
  2. B.π = RT/Cπ = RT/C
  3. C.π = CRTπ = CRT✓ Correct
  4. D.π = C²RTπ = C²RT
Answer: C — π = CRT
For dilute solutions, πV = nRT, or π = (n/V)RT = CRT, where C is the molar concentration.तनु विलयनों के लिए πV = nRT, अर्थात् π = (n/V)RT = CRT, जहाँ C मोलर सांद्रता है।
Q22.Solid State

Schottky defect in an ionic crystal arises when:

आयनिक क्रिस्टल में शॉट्की दोष उत्पन्न होता है जब:

  1. A.Ions are displaced into interstitial sitesआयन अंतराकाशी स्थानों में विस्थापित हो जाते हैं
  2. B.A foreign ion replaces a lattice ionकोई बाहरी आयन जालक आयन का स्थान ले लेता है
  3. C.Extra cations occupy interstitial sitesअतिरिक्त धनायन अंतराकाशी स्थान घेर लेते हैं
  4. D.An equal number of cations and anions are missing from their lattice sitesधनायनों और ऋणायनों की समान संख्या अपने जालक स्थानों से अनुपस्थित होती है✓ Correct
Answer: D — An equal number of cations and anions are missing from their lattice sites
In a Schottky defect, equal numbers of cations and anions are missing, so electrical neutrality is maintained while the density of the crystal decreases. Displacement into interstitial sites is the Frenkel defect.शॉट्की दोष में धनायनों और ऋणायनों की समान संख्या अनुपस्थित होती है, जिससे विद्युत उदासीनता बनी रहती है परंतु क्रिस्टल का घनत्व घट जाता है। अंतराकाशी स्थानों में विस्थापन फ्रेंकेल दोष है।
Q23.Metallurgy

In the Mond process, nickel is purified through the formation of:

मॉन्ड प्रक्रम में निकेल का शुद्धिकरण किसके निर्माण द्वारा होता है:

  1. A.Nickel tetracarbonyl, Ni(CO)₄निकेल टेट्राकार्बोनिल, Ni(CO)₄✓ Correct
  2. B.Nickel oxide, NiOनिकेल ऑक्साइड, NiO
  3. C.Nickel chloride, NiCl₂निकेल क्लोराइड, NiCl₂
  4. D.Nickel sulphate, NiSO₄निकेल सल्फेट, NiSO₄
Answer: A — Nickel tetracarbonyl, Ni(CO)₄
Impure nickel reacts with carbon monoxide to form volatile Ni(CO)₄, which is then decomposed at higher temperature to give pure nickel.अशुद्ध निकेल कार्बन मोनोऑक्साइड से अभिक्रिया करके वाष्पशील Ni(CO)₄ बनाता है, जिसे फिर उच्च ताप पर विघटित करके शुद्ध निकेल प्राप्त होता है।
Q24.s-Block Elements

The chemical formula of gypsum is:

जिप्सम का रासायनिक सूत्र है:

  1. A.CaSO₄·2H₂OCaSO₄·2H₂O✓ Correct
  2. B.CaSO₄·½H₂OCaSO₄·½H₂O
  3. C.CaSO₄CaSO₄
  4. D.CaCO₃CaCO₃
Answer: A — CaSO₄·2H₂O
Gypsum is calcium sulphate dihydrate, CaSO₄·2H₂O. On heating to 393 K it loses water to give plaster of Paris, CaSO₄·½H₂O.जिप्सम कैल्शियम सल्फेट डाइहाइड्रेट, CaSO₄·2H₂O है। 393 K पर गर्म करने पर यह जल खोकर प्लास्टर ऑफ पेरिस, CaSO₄·½H₂O, देता है।
Q25.p-Block Elements

Which oxide of nitrogen is regarded as the anhydride of nitric acid?

नाइट्रोजन का कौन-सा ऑक्साइड नाइट्रिक अम्ल का ऐनहाइड्राइड माना जाता है?

  1. A.N₂ON₂O
  2. B.N₂O₅N₂O₅✓ Correct
  3. C.NONO
  4. D.NO₂NO₂
Answer: B — N₂O₅
N₂O₅ reacts with water to give nitric acid (N₂O₅ + H₂O → 2HNO₃), so it is the anhydride of HNO₃.N₂O₅ जल से अभिक्रिया करके नाइट्रिक अम्ल देता है (N₂O₅ + H₂O → 2HNO₃), अतः यह HNO₃ का ऐनहाइड्राइड है।
Q26.d- and f-Block Elements

The intense purple colour of KMnO₄ is mainly due to:

KMnO₄ का गहरा बैंगनी रंग मुख्यतः किसके कारण होता है:

  1. A.d–d electronic transitionsd–d इलेक्ट्रॉनिक संक्रमण
  2. B.Presence of unpaired electronsअयुग्मित इलेक्ट्रॉनों की उपस्थिति
  3. C.Polarisation of the MnO₄⁻ ionMnO₄⁻ आयन का ध्रुवण
  4. D.Charge-transfer transitionsआवेश-स्थानांतरण संक्रमण✓ Correct
Answer: D — Charge-transfer transitions
Mn in KMnO₄ is in the +7 state with a d⁰ configuration, so d–d transitions are impossible; the intense colour comes from ligand-to-metal charge transfer.KMnO₄ में Mn +7 अवस्था में d⁰ विन्यास में होता है, अतः d–d संक्रमण संभव नहीं है; गहरा रंग लिगन्ड-से-धातु आवेश-स्थानांतरण के कारण होता है।
Q27.Coordination Compounds

The hybridisation of the nickel atom in the complex [Ni(CN)₄]²⁻ is:

संकुल [Ni(CN)₄]²⁻ में निकेल परमाणु का संकरण है:

  1. A.sp³sp³
  2. B.sp³d²sp³d²
  3. C.dsp²dsp²✓ Correct
  4. D.d²sp³d²sp³
Answer: C — dsp²
CN⁻ is a strong-field ligand; it pairs up the electrons of Ni²⁺ (d⁸), freeing one d-orbital, so the complex is dsp² hybridised and square planar.CN⁻ प्रबल-क्षेत्र लिगन्ड है; यह Ni²⁺ (d⁸) के इलेक्ट्रॉनों को युग्मित करके एक d-कक्षक खाली कर देता है, अतः संकुल dsp² संकरित और वर्ग समतलीय होता है।
Q28.Coordination Compounds

In the spectrochemical series, the strongest field ligand among the following is:

स्पेक्ट्रोरासायनिक श्रेणी में निम्नलिखित में से सबसे प्रबल क्षेत्र लिगन्ड है:

  1. A.I⁻I⁻
  2. B.F⁻F⁻
  3. C.NH₃NH₃
  4. D.CN⁻CN⁻✓ Correct
Answer: D — CN⁻
The spectrochemical series increases I⁻ < Br⁻ < Cl⁻ < F⁻ < H₂O < NH₃ < en < CN⁻ ≈ CO; cyanide is one of the strongest field ligands and causes maximum crystal-field splitting.स्पेक्ट्रोरासायनिक श्रेणी का क्रम I⁻ < Br⁻ < Cl⁻ < F⁻ < H₂O < NH₃ < en < CN⁻ ≈ CO है; साइनाइड सबसे प्रबल क्षेत्र लिगन्डों में से एक है और अधिकतम क्रिस्टल-क्षेत्र विपाटन करता है।
Q29.Haloalkanes

The Finkelstein reaction is carried out by treating an alkyl chloride or bromide with:

फिंकेलस्टीन अभिक्रिया में ऐल्किल क्लोराइड या ब्रोमाइड को किसके साथ उपचारित किया जाता है:

  1. A.AgNO₃ solutionAgNO₃ विलयन
  2. B.NaCl in waterजल में NaCl
  3. C.NaI in dry acetoneशुष्क ऐसीटोन में NaI✓ Correct
  4. D.KBr in acetoneऐसीटोन में KBr
Answer: C — NaI in dry acetone
In the Finkelstein reaction, R–Cl or R–Br reacts with NaI in dry acetone to give R–I; NaCl/NaBr formed precipitates out, driving the exchange.फिंकेलस्टीन अभिक्रिया में R–Cl या R–Br शुष्क ऐसीटोन में NaI से अभिक्रिया करके R–I देता है; बनने वाला NaCl/NaBr अवक्षेपित हो जाता है, जिससे विनिमय आगे बढ़ता है।
Q30.Alcohols and Phenols

When small pieces of sodium metal are dropped into ethanol, the products formed are:

जब सोडियम धातु के छोटे टुकड़े एथेनॉल में डाले जाते हैं, तो बनने वाले उत्पाद हैं:

  1. A.Sodium ethoxide and hydrogen gasसोडियम एथॉक्साइड और हाइड्रोजन गैस✓ Correct
  2. B.Sodium hydroxide and ethaneसोडियम हाइड्रॉक्साइड और एथेन
  3. C.Sodium ethanoate and waterसोडियम एथेनोएट और जल
  4. D.Only hydrogen gas, sodium does not reactकेवल हाइड्रोजन गैस, सोडियम अभिक्रिया नहीं करता
Answer: A — Sodium ethoxide and hydrogen gas
Ethanol reacts with sodium (less vigorously than water does) to form sodium ethoxide, C₂H₅ONa, with the evolution of hydrogen gas.एथेनॉल सोडियम से (जल की तुलना में कम तीव्रता से) अभिक्रिया करके सोडियम एथॉक्साइड, C₂H₅ONa, बनाता है और हाइड्रोजन गैस मुक्त होती है।
Q31.Alcohols and Phenols

In the Reimer–Tiemann reaction, phenol is treated with chloroform and aqueous KOH to give mainly:

रीमर–टीमन अभिक्रिया में फीनॉल को क्लोरोफॉर्म और जलीय KOH के साथ उपचारित करने पर मुख्यतः प्राप्त होता है:

  1. A.Phenolphthaleinफीनॉल्फथेलीन
  2. B.Salicylaldehyde (o-hydroxybenzaldehyde)सैलिसिलैल्डिहाइड (o-हाइड्रॉक्सीबेंज़ैल्डिहाइड)✓ Correct
  3. C.Salicylic acidसैलिसिलिक अम्ल
  4. D.o-Chlorophenolo-क्लोरोफीनॉल
Answer: B — Salicylaldehyde (o-hydroxybenzaldehyde)
The Reimer–Tiemann reaction introduces a –CHO group ortho to the –OH of phenol, giving salicylaldehyde as the main product.रीमर–टीमन अभिक्रिया फीनॉल के –OH के ऑर्थो स्थान पर –CHO समूह जोड़ती है, जिससे मुख्य उत्पाद सैलिसिलैल्डिहाइड बनता है।
Q32.Aldehydes and Ketones

Which of the following aldehydes does NOT give a positive Fehling's test?

निम्नलिखित में से कौन-सा ऐल्डिहाइड फेलिंग परीक्षण धनात्मक नहीं देता?

  1. A.Benzaldehydeबेंज़ैल्डिहाइड✓ Correct
  2. B.Acetaldehydeऐसीटैल्डिहाइड
  3. C.Propanalप्रोपेनैल
  4. D.Formaldehydeफॉर्मैल्डिहाइड
Answer: A — Benzaldehyde
Fehling's solution is reduced by aliphatic aldehydes but not by aromatic aldehydes such as benzaldehyde.फेलिंग विलयन ऐलिफैटिक ऐल्डिहाइडों द्वारा अपचयित होता है, परंतु बेंज़ैल्डिहाइड जैसे ऐरोमैटिक ऐल्डिहाइडों द्वारा नहीं।
Q33.Aldehydes and Ketones

In Clemmensen reduction, a carbonyl group (>C=O) is converted into:

क्लीमेंसन अपचयन में कार्बोनिल समूह (>C=O) किसमें परिवर्तित होता है:

  1. A.A –CH₂– (methylene) group–CH₂– (मेथिलीन) समूह में✓ Correct
  2. B.A –CH(OH)– group–CH(OH)– समूह में
  3. C.A –COOH group–COOH समूह में
  4. D.A C=C double bondC=C द्विआबंध में
Answer: A — A –CH₂– (methylene) group
Clemmensen reduction (Zn–Hg/concentrated HCl) reduces the carbonyl group of aldehydes and ketones all the way to a methylene (–CH₂–) group.क्लीमेंसन अपचयन (Zn–Hg/सांद्र HCl) ऐल्डिहाइडों और कीटोनों के कार्बोनिल समूह को पूर्णतः मेथिलीन (–CH₂–) समूह में अपचयित कर देता है।
Q34.Carboxylic Acids

The Hell–Volhard–Zelinsky (HVZ) reaction is used for:

हेल–वोल्हार्ड–ज़ेलिंस्की (HVZ) अभिक्रिया का उपयोग होता है:

  1. A.Decarboxylation of carboxylic acidsकार्बोक्सिलिक अम्लों के विकार्बोक्सिलीकरण के लिए
  2. B.Esterification of carboxylic acidsकार्बोक्सिलिक अम्लों के एस्टरीकरण के लिए
  3. C.Reduction of carboxylic acids to alcoholsकार्बोक्सिलिक अम्लों के ऐल्कोहॉल में अपचयन के लिए
  4. D.α-Halogenation of carboxylic acidsकार्बोक्सिलिक अम्लों के α-हैलोजनीकरण के लिए✓ Correct
Answer: D — α-Halogenation of carboxylic acids
In the HVZ reaction, a carboxylic acid with an α-hydrogen is treated with Cl₂ or Br₂ in presence of red phosphorus to replace the α-hydrogen by halogen.HVZ अभिक्रिया में α-हाइड्रोजन युक्त कार्बोक्सिलिक अम्ल को लाल फॉस्फोरस की उपस्थिति में Cl₂ या Br₂ से उपचारित करके α-हाइड्रोजन को हैलोजन से प्रतिस्थापित किया जाता है।
Q35.Amines

The carbylamine reaction (heating with CHCl₃ and alcoholic KOH) is given by:

कार्बिलऐमीन अभिक्रिया (CHCl₃ और ऐल्कोहॉली KOH के साथ गर्म करना) कौन देता है:

  1. A.Secondary amines onlyकेवल द्वितीयक ऐमीन
  2. B.Primary amines onlyकेवल प्राथमिक ऐमीन✓ Correct
  3. C.Tertiary amines onlyकेवल तृतीयक ऐमीन
  4. D.All aminesसभी ऐमीन
Answer: B — Primary amines only
Only primary amines (aliphatic and aromatic) give the carbylamine reaction, forming a foul-smelling isocyanide; it is a test for primary amines.केवल प्राथमिक ऐमीन (ऐलिफैटिक और ऐरोमैटिक) कार्बिलऐमीन अभिक्रिया देते हैं, जिससे दुर्गंधयुक्त आइसोसाइनाइड बनता है; यह प्राथमिक ऐमीनों का परीक्षण है।
Q36.Amines

In the Sandmeyer reaction, benzene diazonium chloride on treatment with CuCl/HCl gives:

सैंडमेयर अभिक्रिया में बेंज़ीन डाइऐज़ोनियम क्लोराइड को CuCl/HCl के साथ उपचारित करने पर प्राप्त होता है:

  1. A.Chlorobenzeneक्लोरोबेंज़ीन✓ Correct
  2. B.Benzeneबेंज़ीन
  3. C.Phenolफीनॉल
  4. D.Anilineऐनिलीन
Answer: A — Chlorobenzene
The Sandmeyer reaction replaces the diazonium group (–N₂⁺Cl⁻) by chlorine using CuCl/HCl, giving chlorobenzene.सैंडमेयर अभिक्रिया में CuCl/HCl का उपयोग करके डाइऐज़ोनियम समूह (–N₂⁺Cl⁻) को क्लोरीन से प्रतिस्थापित किया जाता है, जिससे क्लोरोबेंज़ीन बनता है।
Q37.Biomolecules

The linkage that joins two monosaccharide units in a disaccharide or polysaccharide is called:

डाइसैकेराइड या पॉलिसैकेराइड में दो मोनोसैकेराइड इकाइयों को जोड़ने वाला बंध कहलाता है:

  1. A.Peptide linkageपेप्टाइड बंध
  2. B.Phosphodiester linkageफॉस्फोडाइएस्टर बंध
  3. C.Hydrogen bondहाइड्रोजन बंध
  4. D.Glycosidic linkageग्लाइकोसिडिक बंध✓ Correct
Answer: D — Glycosidic linkage
Monosaccharides are joined by glycosidic (ether-type C–O–C) linkages formed by loss of a water molecule; peptide bonds join amino acids and phosphodiester bonds join nucleotides.मोनोसैकेराइड जल के एक अणु के निष्कासन से बने ग्लाइकोसिडिक (ईथर-जैसे C–O–C) बंधों से जुड़े होते हैं; पेप्टाइड बंध अमीनो अम्लों को और फॉस्फोडाइएस्टर बंध न्यूक्लियोटाइडों को जोड़ते हैं।
Q38.Polymers

Buna-S rubber is a copolymer of:

बुना-S रबर किसका सहबहुलक है:

  1. A.1,3-Butadiene and isoprene1,3-ब्यूटाडाईन और आइसोप्रीन
  2. B.1,3-Butadiene and styrene1,3-ब्यूटाडाईन और स्टाइरीन✓ Correct
  3. C.Styrene and chloropreneस्टाइरीन और क्लोरोप्रीन
  4. D.1,3-Butadiene and acrylonitrile1,3-ब्यूटाडाईन और एक्रिलोनाइट्राइल
Answer: B — 1,3-Butadiene and styrene
Buna-S (SBR) is made from about 75% 1,3-butadiene and 25% styrene. Buna-N instead uses acrylonitrile in place of styrene.बुना-S (SBR) लगभग 75% 1,3-ब्यूटाडाईन और 25% स्टाइरीन से बनता है। बुना-N में स्टाइरीन के स्थान पर एक्रिलोनाइट्राइल होता है।
Q39.Polymers

Natural rubber is a polymer of:

प्राकृतिक रबर किसका बहुलक है:

  1. A.Chloropreneक्लोरोप्रीन
  2. B.Isoprene (2-methyl-1,3-butadiene)आइसोप्रीन (2-मेथिल-1,3-ब्यूटाडाईन)✓ Correct
  3. C.1,3-Butadiene1,3-ब्यूटाडाईन
  4. D.Styreneस्टाइरीन
Answer: B — Isoprene (2-methyl-1,3-butadiene)
Natural rubber is cis-polyisoprene, a polymer of isoprene (2-methyl-1,3-butadiene) obtained from the latex of the rubber tree.प्राकृतिक रबर सिस-पॉलिआइसोप्रीन है, जो रबर वृक्ष के क्षीर (लेटेक्स) से प्राप्त आइसोप्रीन (2-मेथिल-1,3-ब्यूटाडाईन) का बहुलक है।
Q40.Chemistry in Everyday Life

Aspirin, widely used as an analgesic and antipyretic, is chemically:

पीड़ाहारी और ज्वरनाशी के रूप में व्यापकतः प्रयुक्त ऐस्पिरिन रासायनिक रूप से है:

  1. A.Methyl salicylateमेथिल सैलिसिलेट
  2. B.Salol (phenyl salicylate)सैलोल (फेनिल सैलिसिलेट)
  3. C.Acetylsalicylic acidऐसीटिलसैलिसिलिक अम्ल✓ Correct
  4. D.Paracetamolपैरासिटामॉल
Answer: C — Acetylsalicylic acid
Aspirin is acetylsalicylic acid, prepared by acetylation of salicylic acid; methyl salicylate is oil of wintergreen.ऐस्पिरिन ऐसीटिलसैलिसिलिक अम्ल है, जो सैलिसिलिक अम्ल के ऐसीटिलीकरण से बनता है; मेथिल सैलिसिलेट विंटरग्रीन का तेल है।
▶ Play this set online — free, with timer, score & rank
← Set 4All BPSC TRE practice setsSet 6 →BPSC TRE exam guide →

Get daily exam updates on Telegram

Join the SarkariManzil channel — new jobs, results, admit cards and daily current affairs, first on Telegram. Free.

Join SarkariManzil on Telegram ↗