SarkariManzil
BSEB · Bihar STET

Bihar STET Computer Science Set 5

By Archit Kumar · Published: 18 October 2026 · 40 questions · English + हिंदी
Bihar STET marking rule: +1 for a correct answer. There is no negative marking — a wrong or blank answer scores 0, so attempt every question.
▶ Play this set online — free, with timer, score & rank

Read all 40 questions below with answers and explanations, or play the set online in the SarkariManzil practice app. In the app, sets unlock in order — submit Set N to open Set N+1.

Q1.Computer Fundamental

The smallest unit of data in a computer is a:

कंप्यूटर में डाटा की सबसे छोटी इकाई है:

  1. A.ByteByte (बाइट)
  2. B.NibbleNibble (निबल)
  3. C.BitBit (बिट)✓ Correct
  4. D.WordWord (वर्ड)
Answer: C — Bit
All data in a computer is stored as binary digits; a single binary digit, 0 or 1, is a bit — the smallest unit of data. Eight bits make one byte.कंप्यूटर में सारा डाटा बाइनरी अंकों के रूप में सहेजा जाता है; एक बाइनरी अंक, 0 या 1, एक बिट है — डाटा की सबसे छोटी इकाई। आठ बिट से एक बाइट बनता है।
Q2.Computer Fundamental

The decimal value of the binary number 1111 is:

बाइनरी संख्या 1111 का दशमलव मान है:

  1. A.1414
  2. B.1616
  3. C.1111
  4. D.1515✓ Correct
Answer: D — 15
1111 = 1×2³ + 1×2² + 1×2¹ + 1×2⁰ = 8 + 4 + 2 + 1 = 15.1111 = 1×2³ + 1×2² + 1×2¹ + 1×2⁰ = 8 + 4 + 2 + 1 = 15।
Q3.Computer Fundamental

One petabyte (PB) of storage is equal to:

एक पेटाबाइट (PB) स्टोरेज बराबर होता है:

  1. A.1024 GB1024 GB
  2. B.1024 TB1024 TB✓ Correct
  3. C.1024 EB1024 EB
  4. D.1000 TB1000 TB
Answer: B — 1024 TB
Storage sizes grow in multiples of 1024: 1 PB = 1024 TB, 1 TB = 1024 GB and 1 GB = 1024 MB.स्टोरेज आकार 1024 के गुणक में बढ़ते हैं: 1 PB = 1024 TB, 1 TB = 1024 GB और 1 GB = 1024 MB।
Q4.Computer Fundamental

'PARAM', developed by C-DAC, is famous in India as:

'PARAM', जिसे C-DAC ने विकसित किया, भारत में किस रूप में प्रसिद्ध है?

  1. A.India's first laptopभारत का पहला लैपटॉप
  2. B.India's first web browserभारत का पहला वेब ब्राउज़र
  3. C.India's first supercomputerभारत का पहला सुपरकंप्यूटर✓ Correct
  4. D.India's first operating systemभारत का पहला ऑपरेटिंग सिस्टम
Answer: C — India's first supercomputer
PARAM 8000, built by C-DAC (Centre for Development of Advanced Computing) in 1991, is regarded as India's first supercomputer.C-DAC (Centre for Development of Advanced Computing) द्वारा 1991 में बनाया गया PARAM 8000 भारत का पहला सुपरकंप्यूटर माना जाता है।
Q5.Computer Fundamental

The base (radix) of the hexadecimal number system is:

हेक्साडेसिमल संख्या पद्धति का आधार (radix) है:

  1. A.1616✓ Correct
  2. B.88
  3. C.1010
  4. D.22
Answer: A — 16
The hexadecimal system uses 16 symbols — the digits 0 to 9 and the letters A to F — so its base is 16.हेक्साडेसिमल पद्धति में 16 प्रतीक होते हैं — अंक 0 से 9 और अक्षर A से F — इसलिए इसका आधार 16 है।
Q6.Computer Hardware

A webcam connected to a computer is mainly used to:

कंप्यूटर से जुड़ा वेबकैम मुख्यतः किस काम आता है?

  1. A.Print photographsतस्वीरें छापना
  2. B.Store backup dataबैकअप डाटा सहेजना
  3. C.Capture live video for video calls and conferencingवीडियो कॉल और कॉन्फ्रेंसिंग के लिए लाइव वीडियो कैप्चर करना✓ Correct
  4. D.Increase the speed of the CPUCPU की गति बढ़ाना
Answer: C — Capture live video for video calls and conferencing
A webcam is a small digital camera whose images are fed into the computer in real time, so it is used for video calling, online classes and conferencing.वेबकैम एक छोटा डिजिटल कैमरा है जिसकी छवियाँ वास्तविक समय में कंप्यूटर को मिलती हैं, इसलिए इसका उपयोग वीडियो कॉल, ऑनलाइन कक्षा और कॉन्फ्रेंसिंग में होता है।
Q7.Computer Hardware

The standard storage capacity of a single-layer Blu-ray disc is about:

एकल-परत (single-layer) Blu-ray डिस्क की मानक क्षमता लगभग होती है:

  1. A.4.7 GB4.7 GB
  2. B.700 MB700 MB
  3. C.1.44 MB1.44 MB
  4. D.25 GB25 GB✓ Correct
Answer: D — 25 GB
A single-layer Blu-ray disc stores about 25 GB — far more than a DVD (4.7 GB) or a CD (700 MB).एकल-परत Blu-ray डिस्क में लगभग 25 GB डाटा आता है — DVD (4.7 GB) या CD (700 MB) से कहीं अधिक।
Q8.Computer Hardware

The resolution of a computer monitor refers to:

कंप्यूटर मॉनिटर का रेज़ोल्यूशन किसे कहते हैं?

  1. A.The size of the screen in inchesइंच में स्क्रीन का आकार
  2. B.The number of pixels displayed on the screenस्क्रीन पर प्रदर्शित पिक्सेल की संख्या✓ Correct
  3. C.The number of colours in a pictureकिसी तस्वीर में रंगों की संख्या
  4. D.The speed at which the screen refreshesस्क्रीन के रिफ्रेश होने की गति
Answer: B — The number of pixels displayed on the screen
Resolution is the total number of pixels (picture elements) shown on the screen, expressed as width × height, such as 1920 × 1080; more pixels give a sharper image.रेज़ोल्यूशन स्क्रीन पर दिखने वाले कुल पिक्सेल (picture elements) की संख्या है, जो चौड़ाई × ऊँचाई के रूप में लिखी जाती है, जैसे 1920 × 1080; अधिक पिक्सेल से छवि अधिक स्पष्ट होती है।
Q9.Computer Hardware

The SMPS (Switched Mode Power Supply) in a desktop computer mainly:

डेस्कटॉप कंप्यूटर में SMPS (Switched Mode Power Supply) का मुख्य कार्य है:

  1. A.Converts AC supply into the DC voltages needed by the computer's partsAC आपूर्ति को कंप्यूटर के भागों के लिए ज़रूरी DC वोल्टेज में बदलना✓ Correct
  2. B.Stores data permanentlyडाटा स्थायी रूप से सहेजना
  3. C.Connects the computer to the Internetकंप्यूटर को इंटरनेट से जोड़ना
  4. D.Cools the processorप्रोसेसर को ठंडा रखना
Answer: A — Converts AC supply into the DC voltages needed by the computer's parts
The SMPS takes the alternating current (AC) from the mains and converts it into the steady low DC voltages (such as +3.3V, +5V and +12V) that the motherboard and other parts need.SMPS मुख्य बिजली की alternating current (AC) को उन स्थिर निम्न DC वोल्टेज (जैसे +3.3V, +5V और +12V) में बदलता है जिनकी मदरबोर्ड और अन्य भागों को ज़रूरत होती है।
Q10.Computer Hardware

Which printer prints by spraying tiny droplets of ink onto the paper?

कौन-सा प्रिंटर कागज़ पर स्याही की सूक्ष्म बूँदें छिड़ककर छपाई करता है?

  1. A.Inkjet printerInkjet printer (इंकजेट प्रिंटर)✓ Correct
  2. B.Laser printerLaser printer (लेज़र प्रिंटर)
  3. C.Dot-matrix printerDot-matrix printer (डॉट-मैट्रिक्स प्रिंटर)
  4. D.PlotterPlotter (प्लॉटर)
Answer: A — Inkjet printer
An inkjet printer forms characters and pictures by spraying very fine droplets of ink through tiny nozzles onto the paper; it is a non-impact printer.इंकजेट प्रिंटर छोटे-छोटे नॉज़ल से स्याही की अत्यंत महीन बूँदें कागज़ पर छिड़ककर अक्षर और चित्र बनाता है; यह एक non-impact प्रिंटर है।
Q11.Computer Software

In most Windows applications, the shortcut key Ctrl + Z is used to:

अधिकांश Windows एप्लिकेशन में Ctrl + Z शॉर्टकट का उपयोग होता है:

  1. A.Redo the last actionअंतिम क्रिया को फिर से (redo) करने के लिए
  2. B.Cut the selected partचुने भाग को काटने (cut) के लिए
  3. C.Undo the last actionअंतिम क्रिया को पूर्ववत (undo) करने के लिए✓ Correct
  4. D.Select the whole documentपूरा दस्तावेज़ चुनने के लिए
Answer: C — Undo the last action
Ctrl + Z reverses (undoes) the most recent action in most applications; Ctrl + Y is generally used to redo it.Ctrl + Z अधिकांश एप्लिकेशन में सबसे हाल की क्रिया को उलट देता है (undo); उसे फिर से करने के लिए सामान्यतः Ctrl + Y का उपयोग होता है।
Q12.Computer Software

Which MS Excel function returns the largest value in a range of cells?

MS Excel का कौन-सा फंक्शन किसी सेल-श्रेणी का सबसे बड़ा मान देता है?

  1. A.SUM()SUM()
  2. B.COUNT()COUNT()
  3. C.MIN()MIN()
  4. D.MAX()MAX()✓ Correct
Answer: D — MAX()
MAX() gives the greatest number in the selected range; MIN() gives the smallest, SUM() the total and COUNT() the number of entries.MAX() चुनी हुई श्रेणी की सबसे बड़ी संख्या देता है; MIN() सबसे छोटी, SUM() योग और COUNT() प्रविष्टियों की संख्या देता है।
Q13.Computer Software

In MS PowerPoint, a 'transition' is:

MS PowerPoint में 'transition' क्या है?

  1. A.The movement of text within one slideएक ही स्लाइड के भीतर पाठ की गति
  2. B.The visual effect seen when moving from one slide to the nextएक स्लाइड से दूसरी स्लाइड पर जाते समय दिखने वाला दृश्य प्रभाव✓ Correct
  3. C.The sound played during the showशो के दौरान बजने वाली ध्वनि
  4. D.The background colour of a slideस्लाइड का पृष्ठभूमि रंग
Answer: B — The visual effect seen when moving from one slide to the next
A transition is the special effect — such as fade, push or wipe — that appears when the presentation moves from one slide to the next; movement of objects within a slide is called animation.Transition वह विशेष प्रभाव है — जैसे fade, push या wipe — जो प्रस्तुति के एक स्लाइड से दूसरी पर जाने पर दिखता है; स्लाइड के भीतर वस्तुओं की गति को animation कहते हैं।
Q14.Computer Software

WinZip and WinRAR are utility software mainly used for:

WinZip और WinRAR यूटिलिटी सॉफ़्टवेयर मुख्यतः किस काम आते हैं?

  1. A.Removing virusesवायरस हटाना
  2. B.Editing photographsतस्वीरें संपादित करना
  3. C.Playing video filesवीडियो फ़ाइलें चलाना
  4. D.Compressing files and extracting compressed filesफ़ाइलों को संपीड़ित (compress) करना और संपीड़ित फ़ाइलों को खोलना✓ Correct
Answer: D — Compressing files and extracting compressed files
WinZip and WinRAR compress files into smaller archives (such as .zip and .rar) and extract files back from such archives, saving space and making sharing easier.WinZip और WinRAR फ़ाइलों को छोटे archive (जैसे .zip और .rar) में संपीड़ित करते हैं और ऐसे archive से फ़ाइलें वापस निकालते हैं, जिससे स्थान बचता है और साझा करना आसान होता है।
Q15.Computer Software

A 'device driver' in a computer is:

कंप्यूटर में 'device driver' क्या है?

  1. A.Software that lets the operating system communicate with a hardware deviceवह सॉफ़्टवेयर जो ऑपरेटिंग सिस्टम को हार्डवेयर यंत्र से संवाद करने देता है✓ Correct
  2. B.A person who maintains computersकंप्यूटरों की देखभाल करने वाला व्यक्ति
  3. C.A cable that joins two devicesदो यंत्रों को जोड़ने वाला केबल
  4. D.A chip fitted on the motherboardमदरबोर्ड पर लगी चिप
Answer: A — Software that lets the operating system communicate with a hardware device
Every hardware device, such as a printer or scanner, needs its driver — a small program through which the operating system sends commands to the device and receives its responses.हर हार्डवेयर यंत्र, जैसे प्रिंटर या स्कैनर, के लिए उसका driver चाहिए — एक छोटा प्रोग्राम जिसके द्वारा ऑपरेटिंग सिस्टम यंत्र को आदेश भेजता है और उसकी प्रतिक्रिया पाता है।
Q16.Computer Networks

A repeater in a computer network is used to:

कंप्यूटर नेटवर्क में repeater का उपयोग होता है:

  1. A.Connect two different networksदो अलग नेटवर्कों को जोड़ना
  2. B.Regenerate and amplify weak signals so they can travel longer distancesकमज़ोर सिग्नल को पुनः मज़बूत बनाकर आगे भेजना, ताकि वह अधिक दूरी तय कर सके✓ Correct
  3. C.Store web pagesवेब पेज सहेजना
  4. D.Protect the network from virusesनेटवर्क को वायरस से बचाना
Answer: B — Regenerate and amplify weak signals so they can travel longer distances
As a signal travels along a cable it becomes weak and distorted; a repeater receives it, rebuilds it at full strength and sends it on, extending the length of the network.केबल में चलते-चलते सिग्नल कमज़ोर और विकृत हो जाता है; repeater उसे ग्रहण कर पूरी शक्ति से पुनः बनाकर आगे भेजता है, जिससे नेटवर्क की लंबाई बढ़ जाती है।
Q17.Computer Networks

IMAP, used with e-mail, is a protocol for:

ई-मेल के साथ प्रयुक्त IMAP किसके लिए एक प्रोटोकॉल है?

  1. A.Sending e-mail to a serverसर्वर को ई-मेल भेजने के लिए
  2. B.Transferring files between computersकंप्यूटरों के बीच फ़ाइलें भेजने के लिए
  3. C.Accessing and reading e-mail stored on a mail serverमेल सर्वर पर सहेजे ई-मेल को खोलकर पढ़ने के लिए✓ Correct
  4. D.Converting domain names into IP addressesडोमेन नाम को IP पते में बदलने के लिए
Answer: C — Accessing and reading e-mail stored on a mail server
IMAP (Internet Message Access Protocol) lets a user read and manage e-mail that stays stored on the mail server, so the same mailbox can be used from many devices.IMAP (Internet Message Access Protocol) उपयोगकर्ता को वह ई-मेल पढ़ने और प्रबंधित करने देता है जो मेल सर्वर पर ही सहेजा रहता है, इसलिए एक ही मेलबॉक्स कई यंत्रों से उपयोग हो सकता है।
Q18.Computer Networks

VoIP technology mainly allows users to:

VoIP तकनीक मुख्यतः उपयोगकर्ताओं को क्या करने देती है?

  1. A.Watch television channelsटेलीविज़न चैनल देखना
  2. B.Make voice calls over the Internetइंटरनेट पर आवाज़ वाली कॉल (voice call) करना✓ Correct
  3. C.Send printed documents by faxफ़ैक्स से छपे दस्तावेज़ भेजना
  4. D.Store files in the cloudक्लाउड में फ़ाइलें सहेजना
Answer: B — Make voice calls over the Internet
VoIP (Voice over Internet Protocol) converts the voice into data packets and carries the call over the Internet, as used in apps for Internet voice and video calling.VoIP (Voice over Internet Protocol) आवाज़ को डाटा पैकेटों में बदलकर कॉल को इंटरनेट पर ले जाता है, जैसा इंटरनेट voice और video calling वाले ऐप में होता है।
Q19.Computer Networks

The permanent, unique hardware address assigned to a network interface card (NIC) is called its:

नेटवर्क इंटरफ़ेस कार्ड (NIC) को दिया गया स्थायी, अद्वितीय हार्डवेयर पता कहलाता है:

  1. A.IP addressIP address (आईपी पता)
  2. B.URLURL
  3. C.MAC addressMAC address (मैक पता)✓ Correct
  4. D.Domain nameDomain name (डोमेन नाम)
Answer: C — MAC address
Every NIC carries a unique 48-bit MAC (Media Access Control) address fixed by its manufacturer; unlike an IP address, it does not change from network to network.हर NIC पर उसके निर्माता द्वारा तय किया गया अद्वितीय 48-bit MAC (Media Access Control) पता होता है; IP पते के विपरीत यह नेटवर्क बदलने से नहीं बदलता।
Q20.Computer Networks

Which type of cable carries data as pulses of light at very high speed?

किस प्रकार का केबल डाटा को प्रकाश की तरंगों के रूप में अत्यधिक गति से ले जाता है?

  1. A.Optical fibre cableOptical fibre cable (ऑप्टिकल फ़ाइबर केबल)✓ Correct
  2. B.Twisted-pair cableTwisted-pair cable (ट्विस्टेड-पेयर केबल)
  3. C.Coaxial cableCoaxial cable (कोएक्सियल केबल)
  4. D.USB cableUSB cable (यूएसबी केबल)
Answer: A — Optical fibre cable
An optical fibre cable carries data as light pulses through thin glass fibres; it gives very high speed, long distance and freedom from electrical interference.ऑप्टिकल फ़ाइबर केबल पतले काँच के तंतुओं में डाटा को प्रकाश-तरंगों के रूप में ले जाता है; इससे अत्यधिक गति, लंबी दूरी और विद्युत बाधा से मुक्ति मिलती है।
Q21.Programming in C

In a C program, the format specifier used in printf() and scanf() for a float value is:

C प्रोग्राम में printf() और scanf() में float मान के लिए प्रयुक्त format specifier है:

  1. A.%d%d
  2. B.%c%c
  3. C.%s%s
  4. D.%f%f✓ Correct
Answer: D — %f
In C, %f is used for floating-point (decimal) values, %d for integers, %c for a single character and %s for a string.C में %f दशमलव (floating-point) मानों के लिए, %d पूर्णांकों के लिए, %c एक अक्षर के लिए और %s string के लिए प्रयुक्त होता है।
Q22.Programming in C

The 'continue' statement inside a loop in C is used to:

C में loop के भीतर 'continue' कथन का उपयोग होता है:

  1. A.Skip the rest of the current iteration and begin the next oneवर्तमान चरण (iteration) के शेष भाग को छोड़कर अगला चरण शुरू करना✓ Correct
  2. B.End the whole programपूरा प्रोग्राम समाप्त करना
  3. C.Stop the loop permanentlyलूप को स्थायी रूप से रोकना
  4. D.Jump to the start of the programप्रोग्राम के आरंभ पर जाना
Answer: A — Skip the rest of the current iteration and begin the next one
'continue' abandons the remaining statements of the current pass of the loop and moves straight to the next iteration, whereas 'break' leaves the loop altogether.'continue' लूप के वर्तमान चरण के शेष कथनों को छोड़कर सीधे अगले चरण पर चला जाता है, जबकि 'break' लूप से पूरी तरह बाहर निकाल देता है।
Q23.Programming in C

In C, all the elements of an array are stored in memory:

C में किसी array के सभी तत्व मेमोरी में सहेजे जाते हैं:

  1. A.At random locationsबिखरे हुए यादृच्छ स्थानों पर
  2. B.At consecutive (contiguous) locationsलगातार (contiguous) स्थानों पर✓ Correct
  3. C.In the hard diskहार्ड डिस्क में
  4. D.Inside the CPU registers onlyकेवल CPU रजिस्टरों के भीतर
Answer: B — At consecutive (contiguous) locations
An array occupies one continuous block of memory: its elements sit one after another at consecutive addresses, which is why any element can be reached directly by its index.Array मेमोरी का एक निरंतर खंड घेरता है: इसके तत्व एक के बाद एक लगातार पतों पर रहते हैं, इसीलिए किसी भी तत्व तक उसके index से सीधे पहुँचा जा सकता है।
Q24.Programming in C

In C++, the special member function that has the same name as the class and runs automatically when an object is created is called a:

C++ में वह विशेष member function, जिसका नाम class के नाम के समान होता है और जो object बनते ही स्वतः चलता है, कहलाता है:

  1. A.DestructorDestructor (डिस्ट्रक्टर)
  2. B.PointerPointer (पॉइंटर)
  3. C.OperatorOperator (ऑपरेटर)
  4. D.ConstructorConstructor (कंस्ट्रक्टर)✓ Correct
Answer: D — Constructor
A constructor is a special function, named exactly after its class, that is called automatically when an object is created and is used to initialise the object.Constructor एक विशेष function है, जिसका नाम ठीक उसकी class के नाम पर होता है, जो object बनते ही स्वतः चलता है और object को प्रारंभिक मान देने के काम आता है।
Q25.Programming in C

A 'pseudocode' in programming is:

प्रोग्रामिंग में 'pseudocode' क्या है?

  1. A.A program written in machine languageमशीनी भाषा में लिखा प्रोग्राम
  2. B.Another name for a flowchartफ़्लोचार्ट का दूसरा नाम
  3. C.An informal, step-by-step description of a program's logic in simple statementsकिसी प्रोग्राम के तर्क का सरल कथनों में अनौपचारिक, क्रमवार वर्णन✓ Correct
  4. D.An error found in a programप्रोग्राम में मिली त्रुटि
Answer: C — An informal, step-by-step description of a program's logic in simple statements
Pseudocode expresses the logic of a program in plain, language-like steps — 'pseudo' means false or imitation code: it is not real code, but a plan from which real code is written.Pseudocode किसी प्रोग्राम के तर्क को साधारण, भाषा-जैसे चरणों में व्यक्त करता है — 'pseudo' का अर्थ है छद्म या नकली code: यह असली code नहीं, बल्कि वह योजना है जिससे असली code लिखा जाता है।
Q26.Programming in C

The selection sort algorithm sorts a list by:

Selection sort एल्गोरिथ्म सूची को कैसे क्रमबद्ध करता है?

  1. A.Comparing and swapping neighbouring elementsपड़ोसी तत्वों की तुलना और अदला-बदली करके
  2. B.Choosing a pivot and dividing the list around itएक pivot चुनकर सूची को उसके चारों ओर बाँटकर
  3. C.Repeatedly selecting the smallest remaining element and placing it in its correct positionशेष तत्वों में से सबसे छोटा तत्व बार-बार चुनकर उसे सही स्थान पर रखकर✓ Correct
  4. D.Dividing the list into halves again and againसूची को बार-बार आधों में बाँटकर
Answer: C — Repeatedly selecting the smallest remaining element and placing it in its correct position
In selection sort, each pass finds the smallest element from the unsorted part and places it at its proper place; the sorted part grows one element at a time.Selection sort में हर चरण में बिना क्रम वाले भाग से सबसे छोटा तत्व खोजकर उसे सही स्थान पर रखा जाता है; क्रमबद्ध भाग एक-एक तत्व करके बढ़ता है।
Q27.Programming in C

The worst-case time complexity of a linear search in a list of n elements is:

n तत्वों की सूची में linear search की worst-case time complexity है:

  1. A.O(n)O(n)✓ Correct
  2. B.O(log n)O(log n)
  3. C.O(1)O(1)
  4. D.O(n²)O(n²)
Answer: A — O(n)
In the worst case, a linear search may have to examine every element of the list, so the work grows in direct proportion to n — O(n).Worst case में linear search को सूची का हर तत्व देखना पड़ सकता है, इसलिए कार्य n के सीधे अनुपात में बढ़ता है — O(n)।
Q28.DBMS

In SQL, the HAVING clause is used together with GROUP BY to:

SQL में HAVING clause का उपयोग GROUP BY के साथ होता है:

  1. A.Sort the result rowsपरिणाम पंक्तियों को क्रमबद्ध करने के लिए
  2. B.Filter the groups formed, according to a conditionबने हुए समूहों को किसी शर्त के अनुसार छाँटने (filter) के लिए✓ Correct
  3. C.Join two tablesदो तालिकाओं को जोड़ने के लिए
  4. D.Remove duplicate rowsदोहराई पंक्तियाँ हटाने के लिए
Answer: B — Filter the groups formed, according to a condition
WHERE filters individual rows before grouping, while HAVING is applied after GROUP BY to keep or reject whole groups — for example, groups whose total crosses a limit.WHERE समूह बनने से पहले अलग-अलग पंक्तियों को छाँटता है, जबकि HAVING GROUP BY के बाद लागू होकर पूरे समूहों को रखता या हटाता है — जैसे वे समूह जिनका योग किसी सीमा से अधिक हो।
Q29.DBMS

In database normalisation, the second normal form (2NF) mainly removes:

डाटाबेस normalisation में दूसरा normal form (2NF) मुख्यतः क्या हटाता है?

  1. A.All duplicate rowsसभी दोहराई पंक्तियाँ
  2. B.Transitive dependencyसकर्मक निर्भरता (transitive dependency)
  3. C.The need for a primary keyप्राथमिक कुंजी की आवश्यकता
  4. D.Partial dependency — a part of a composite key determining other columnsआंशिक निर्भरता — संयुक्त कुंजी के एक भाग पर अन्य स्तंभों की निर्भरता✓ Correct
Answer: D — Partial dependency — a part of a composite key determining other columns
A table is in 2NF when it is in 1NF and no column depends on only a part of a composite primary key; removing such partial dependencies is the work of 2NF. Transitive dependency is removed in 3NF.तालिका 2NF में तब होती है जब वह 1NF में हो और कोई स्तंभ संयुक्त प्राथमिक कुंजी के केवल एक भाग पर निर्भर न हो; ऐसी आंशिक निर्भरता हटाना 2NF का कार्य है। सकर्मक निर्भरता 3NF में हटती है।
Q30.DBMS

A candidate key that is NOT chosen as the primary key of a table is called an:

वह candidate key, जिसे तालिका की primary key नहीं चुना जाता, कहलाती है:

  1. A.Foreign keyForeign key (बाह्य कुंजी)
  2. B.Composite keyComposite key (संयुक्त कुंजी)
  3. C.Super keySuper key (अधि कुंजी)
  4. D.Alternate keyAlternate key (वैकल्पिक कुंजी)✓ Correct
Answer: D — Alternate key
A table may have several candidate keys; the one selected becomes the primary key, and every remaining candidate key is called an alternate key.किसी तालिका में कई candidate key हो सकती हैं; चुनी हुई primary key बन जाती है, और शेष प्रत्येक candidate key को alternate key कहते हैं।
Q31.DBMS

In SQL, the REVOKE command belongs to which category of commands?

SQL में REVOKE कमांड किस श्रेणी की कमांड है?

  1. A.DDL (Data Definition Language)DDL (Data Definition Language)
  2. B.DML (Data Manipulation Language)DML (Data Manipulation Language)
  3. C.DCL (Data Control Language)DCL (Data Control Language)✓ Correct
  4. D.TCL (Transaction Control Language)TCL (Transaction Control Language)
Answer: C — DCL (Data Control Language)
GRANT and REVOKE, which give and take back permissions on database objects, form the Data Control Language (DCL).GRANT और REVOKE, जो डाटाबेस वस्तुओं पर अनुमतियाँ देते और वापस लेते हैं, Data Control Language (DCL) बनाते हैं।
Q32.Data Structures

In a stack data structure, the operation of adding (pushing) an element to the stack is called:

Stack डाटा संरचना में तत्व जोड़ने (push करने) की क्रिया कहलाती है:

  1. A.PopPop (पॉप)
  2. B.PushPush (पुश)✓ Correct
  3. C.PeekPeek (पीक)
  4. D.EnqueueEnqueue (एनक्यू)
Answer: B — Push
Inserting an element onto the top of a stack is 'push'; removing the top element is 'pop', and only seeing the top element is 'peek'.Stack के शीर्ष पर तत्व रखना 'push' है; शीर्ष तत्व हटाना 'pop' और केवल शीर्ष तत्व देखना 'peek' कहलाता है।
Q33.Data Structures

A deque (double-ended queue) is a data structure in which:

Deque (double-ended queue) वह डाटा संरचना है जिसमें:

  1. A.Elements can be inserted and deleted at both endsदोनों सिरों से तत्व जोड़े और हटाए जा सकते हैं✓ Correct
  2. B.Elements can only be inserted at one endतत्व केवल एक सिरे से जोड़े जा सकते हैं
  3. C.Elements are always kept sortedतत्व सदैव क्रमबद्ध रखे जाते हैं
  4. D.Only one element can be storedकेवल एक तत्व सहेजा जा सकता है
Answer: A — Elements can be inserted and deleted at both ends
A deque allows insertion and deletion from both the front and the rear ends, combining the behaviour of a stack and a queue.Deque में आगे और पीछे — दोनों सिरों से तत्व जोड़े और हटाए जा सकते हैं, इसलिए यह stack और queue दोनों का स्वभाव मिलाता है।
Q34.Cyber Safety & ICT

A digital signature on an electronic document is mainly used to ensure:

किसी इलेक्ट्रॉनिक दस्तावेज़ पर digital signature मुख्यतः किसे सुनिश्चित करने के लिए होता है?

  1. A.That the document prints quicklyकि दस्तावेज़ जल्दी छपे
  2. B.The authenticity of the sender and that the document has not been alteredप्रेषक की प्रामाणिकता और यह कि दस्तावेज़ में बदलाव नहीं हुआ✓ Correct
  3. C.That the document stays secret foreverकि दस्तावेज़ सदैव गुप्त रहे
  4. D.That the document is very small in sizeकि दस्तावेज़ का आकार बहुत छोटा हो
Answer: B — The authenticity of the sender and that the document has not been altered
A digital signature uses the sender's private key and can be checked with the public key; it proves who sent the document and that its contents were not changed on the way.Digital signature प्रेषक की private key से बनता है और public key से जाँचा जा सकता है; यह सिद्ध करता है कि दस्तावेज़ किसने भेजा और रास्ते में उसकी सामग्री नहीं बदली गई।
Q35.Cyber Safety & ICT

'Ransomware' is a type of malware that:

'Ransomware' एक प्रकार का malware है जो:

  1. A.Encrypts the victim's data and demands money to unlock itपीड़ित का डाटा encrypt करके उसे खोलने के बदले पैसे माँगता है✓ Correct
  2. B.Shows unwanted advertisementsअनचाहे विज्ञापन दिखाता है
  3. C.Steals passwords typed on the keyboardकीबोर्ड पर टाइप किए पासवर्ड चुराता है
  4. D.Slows down the Internet connectionइंटरनेट कनेक्शन धीमा कर देता है
Answer: A — Encrypts the victim's data and demands money to unlock it
Ransomware locks or encrypts the files on a computer and demands a ransom payment for the key to open them again.Ransomware कंप्यूटर की फ़ाइलों को ताला लगाकर या encrypt करके उन्हें फिर खोलने की कुंजी के बदले फिरौती माँगता है।
Q36.Cyber Safety & ICT

Two-factor authentication (2FA) makes an account safer mainly because it requires:

Two-factor authentication (2FA) किसी खाते को मुख्यतः इसलिए सुरक्षित बनाता है क्योंकि इसमें चाहिए:

  1. A.Two passwords of the same kindएक ही प्रकार के दो पासवर्ड
  2. B.Logging in from two computersदो कंप्यूटरों से लॉग-इन
  3. C.Changing the password every dayरोज़ पासवर्ड बदलना
  4. D.Two different proofs of identity, such as a password plus a one-time codeपहचान के दो भिन्न प्रमाण, जैसे पासवर्ड और एक बार का code✓ Correct
Answer: D — Two different proofs of identity, such as a password plus a one-time code
2FA combines something you know (a password) with something you have (a phone receiving a one-time code) or something you are (a fingerprint), so a stolen password alone is not enough.2FA में 'जो आप जानते हैं' (पासवर्ड) के साथ 'जो आपके पास है' (फ़ोन पर आया one-time code) या 'जो आप हैं' (उँगली का निशान) जुड़ता है, इसलिए केवल चुराया पासवर्ड पर्याप्त नहीं होता।
Q37.Cyber Safety & ICT

DigiLocker, a Government of India service, mainly provides citizens with:

भारत सरकार की सेवा DigiLocker मुख्यतः नागरिकों को क्या देती है?

  1. A.Free Internet accessमुफ़्त इंटरनेट पहुँच
  2. B.An online shopping storeऑनलाइन खरीदारी की दुकान
  3. C.A digital wallet to store and share official documentsआधिकारिक दस्तावेज़ सहेजने और साझा करने का डिजिटल वॉलेट✓ Correct
  4. D.A video-calling facilityवीडियो कॉल की सुविधा
Answer: C — A digital wallet to store and share official documents
DigiLocker gives every citizen a digital locker linked to Aadhaar, in which official documents such as certificates and licences can be stored, and shared digitally wherever required.DigiLocker हर नागरिक को आधार से जुड़ा डिजिटल लॉकर देता है, जिसमें प्रमाणपत्र और लाइसेंस जैसे आधिकारिक दस्तावेज़ सहेजे और जहाँ ज़रूरत हो वहाँ डिजिटल रूप से साझा किए जा सकते हैं।
Q38.Cyber Safety & ICT

The full form of MOOC, as in the courses offered on SWAYAM, is:

MOOC का पूर्ण रूप है (जैसे SWAYAM पर दिए जाने वाले course):

  1. A.Modern Open Online ClassModern Open Online Class
  2. B.Massive Open Online CourseMassive Open Online Course✓ Correct
  3. C.Massive Official Online CourseMassive Official Online Course
  4. D.Monthly Open Online CourseMonthly Open Online Course
Answer: B — Massive Open Online Course
MOOC stands for Massive Open Online Course — a course open to a very large number of learners over the Internet, such as those hosted on the SWAYAM platform.MOOC का अर्थ है Massive Open Online Course — इंटरनेट पर बहुत बड़ी संख्या में शिक्षार्थियों के लिए खुला course, जैसे SWAYAM मंच पर दिए जाने वाले course।
Q39.Computer Fundamental

The process of dividing a hard disk into tracks and sectors so that it can store data is called:

हार्ड डिस्क को tracks और sectors में बाँटने की वह प्रक्रिया, जिससे वह डाटा सहेजने योग्य बनती है, कहलाती है:

  1. A.DefragmentationDefragmentation (डिफ्रैगमेंटेशन)
  2. B.ScanningScanning (स्कैनिंग)
  3. C.BootingBooting (बूटिंग)
  4. D.FormattingFormatting (फ़ॉर्मेटिंग)✓ Correct
Answer: D — Formatting
Formatting prepares a disk by dividing its surface into tracks and sectors and creating a file system, after which data can be stored on it in an organised way.Formatting डिस्क की सतह को tracks और sectors में बाँटकर file system बनाती है, जिसके बाद उस पर डाटा व्यवस्थित रूप से सहेजा जा सकता है।
Q40.Computer Fundamental

The ASCII code of the digit character '0' (zero) is:

अंक-अक्षर '0' (शून्य) का ASCII code है:

  1. A.4848✓ Correct
  2. B.00
  3. C.6565
  4. D.3232
Answer: A — 48
In the ASCII table, the digit characters '0' to '9' carry the codes 48 to 57, so '0' is 48; the capital letter 'A' is 65.ASCII तालिका में अंक-अक्षरों '0' से '9' के code 48 से 57 हैं, इसलिए '0' का code 48 है; बड़ा अक्षर 'A' का code 65 है।
▶ Play this set online — free, with timer, score & rank
← Set 4All Bihar STET practice setsBihar STET exam guide →

Get daily exam updates on Telegram

Join the SarkariManzil channel — new jobs, results, admit cards and daily current affairs, first on Telegram. Free.

Join SarkariManzil on Telegram ↗