Read all 40 questions below with answers and explanations, or play the set online in the SarkariManzil practice app. In the app, sets unlock in order — submit Set N to open Set N+1.
Q1.Computer Fundamental
The binary equivalent of the decimal number 19 is:
दशमलव संख्या 19 का बाइनरी रूप है:
A.1001010010
B.1010110101
C.1001110011✓ Correct
D.1100111001
Answer: C — 10011 19 = 16 + 2 + 1 = 2⁴ + 2¹ + 2⁰, so 19 in binary is 10011.19 = 16 + 2 + 1 = 2⁴ + 2¹ + 2⁰, इसलिए 19 का बाइनरी रूप 10011 है।
Q2.Computer Fundamental
One kilobyte (KB) of memory is equal to:
एक किलोबाइट (KB) मेमोरी बराबर होती है:
A.1024 bytes1024 bytes✓ Correct
B.1000 bytes1000 bytes
C.100 bytes100 bytes
D.512 bytes512 bytes
Answer: A — 1024 bytes In computing, 1 KB = 1024 bytes, because memory sizes are counted in powers of 2 (2¹⁰ = 1024).कंप्यूटिंग में 1 KB = 1024 बाइट होते हैं, क्योंकि मेमोरी का आकार 2 की घातों में गिना जाता है (2¹⁰ = 1024)।
Q3.Computer Fundamental
The sum of the binary numbers 101 and 011 is:
बाइनरी संख्याओं 101 और 011 का योग है:
A.111111
B.10011001
C.110110
D.10001000✓ Correct
Answer: D — 1000 101 in decimal is 5 and 011 is 3; 5 + 3 = 8, which is 1000 in binary.101 का दशमलव मान 5 और 011 का 3 है; 5 + 3 = 8, जो बाइनरी में 1000 होता है।
Q4.Computer Fundamental
The idea that both instructions and data are stored together in the computer's memory is known as the:
वह सिद्धांत, जिसमें निर्देश और डेटा दोनों कंप्यूटर की मेमोरी में एक साथ रखे जाते हैं, कहलाता है:
Answer: B — Stored-program concept John von Neumann's stored-program concept keeps the program and its data in the same memory, so the computer can change its task by loading a new program.जॉन वॉन न्यूमैन के stored-program सिद्धांत में प्रोग्राम और उसका डेटा एक ही मेमोरी में रहते हैं, इसलिए नया प्रोग्राम लोड करके कंप्यूटर का कार्य बदला जा सकता है।
Q5.Computer Fundamental
Second-generation computers were based on:
द्वितीय पीढ़ी के कंप्यूटर आधारित थे:
A.Vacuum tubesवैक्यूम ट्यूब
B.Integrated circuitsएकीकृत परिपथ
C.Microprocessorsमाइक्रोप्रोसेसर
D.Transistorsट्रांजिस्टर✓ Correct
Answer: D — Transistors The second generation (about 1959-1965) replaced bulky vacuum tubes with smaller, cooler and more reliable transistors.द्वितीय पीढ़ी (लगभग 1959-1965) में बड़े वैक्यूम ट्यूबों का स्थान छोटे, कम गर्म और अधिक विश्वसनीय ट्रांजिस्टरों ने लिया।
Q6.Computer Hardware
MICR technology is mainly used in banks for processing:
MICR तकनीक का बैंकों में मुख्य उपयोग होता है:
A.Passportsपासपोर्ट में
B.Chequesचेकों के संसाधन में✓ Correct
C.Photographsफोटो में
D.Barcodesबारकोड में
Answer: B — Cheques MICR (Magnetic Ink Character Recognition) reads the special magnetic-ink characters printed on bank cheques, speeding up their clearing.MICR (Magnetic Ink Character Recognition) बैंक चेकों पर छपे विशेष चुंबकीय-स्याही अक्षरों को पढ़ती है, जिससे चेकों का समाशोधन तेज़ होता है।
Q7.Computer Hardware
Which output device is best suited for printing large engineering drawings and maps?
बड़े इंजीनियरिंग चित्र और मानचित्र छापने के लिए सबसे उपयुक्त आउटपुट उपकरण है:
A.Dot-matrix printerडॉट-मैट्रिक्स प्रिंटर
B.Monitorमॉनिटर
C.Plotterप्लॉटर✓ Correct
D.Speakerस्पीकर
Answer: C — Plotter A plotter draws large, precise line drawings with pens, which is why engineers and architects use it for plans and maps.प्लॉटर कलम से बड़े और सटीक रेखाचित्र बनाता है, इसलिए इंजीनियर और वास्तुकार इसका उपयोग नक्शों व मानचित्रों के लिए करते हैं।
Q8.Computer Hardware
A joystick is an input device mainly used for:
Joystick एक इनपुट उपकरण है जिसका मुख्य उपयोग होता है:
A.Playing computer gamesकंप्यूटर खेल खेलने में✓ Correct
B.Typing lettersअक्षर टाइप करने में
C.Scanning photographsफोटो स्कैन करने में
D.Printing chartsचार्ट छापने में
Answer: A — Playing computer games A joystick is moved in different directions to control movement in games and simulators, so it is chiefly a gaming input device.Joystick को विभिन्न दिशाओं में घुमाकर खेलों और simulators में गति नियंत्रित की जाती है, इसलिए यह मुख्यतः खेलों का इनपुट उपकरण है।
Answer: B — Dot-matrix printer A dot-matrix printer strikes an inked ribbon against the paper through pins, so it is an impact printer; laser and inkjet printers are non-impact.डॉट-मैट्रिक्स प्रिंटर पिनों द्वारा स्याही-रिबन को कागज़ पर ठोककर छापता है, इसलिए यह impact printer है; लेज़र व इंकजेट non-impact होते हैं।
Q10.Computer Hardware
Compared with a traditional hard disk, an SSD (Solid State Drive):
पारंपरिक हार्ड डिस्क की तुलना में SSD (Solid State Drive):
A.Has no moving parts and works fasterमें कोई गतिशील भाग नहीं होता और यह तेज़ काम करती है✓ Correct
B.Has spinning plattersमें घूमती हुई प्लेटें होती हैं
C.Always stores less dataसदैव कम डेटा रखती है
D.Works without electricityबिना बिजली के काम करती है
Answer: A — Has no moving parts and works faster An SSD stores data in flash memory chips and has no moving parts, so it reads and writes data much faster than a spinning hard disk.SSD डेटा को flash memory चिपों में रखती है और इसमें कोई गतिशील भाग नहीं होता, इसलिए यह घूमती हार्ड डिस्क से कहीं तेज़ डेटा पढ़ती-लिखती है।
Q11.Software
Tally software is mainly used for:
Tally सॉफ़्टवेयर का मुख्य उपयोग होता है:
A.Photo editingफोटो संपादन में
B.Video callingवीडियो कॉल में
C.Web browsingवेब browsing में
D.Accountingलेखांकन (accounting) में✓ Correct
Answer: D — Accounting Tally is accounting software used by businesses to keep accounts, prepare bills and maintain ledgers.Tally लेखांकन सॉफ़्टवेयर है, जिसका उपयोग व्यवसाय अपने खाते रखने, बिल बनाने और बही-खाते बनाए रखने के लिए करते हैं।
Q12.Software
The shortcut key used to save a file in most Windows applications is:
अधिकांश Windows अनुप्रयोगों में फाइल सहेजने की shortcut key है:
A.Ctrl + PCtrl + P
B.Ctrl + NCtrl + N
C.Ctrl + SCtrl + S✓ Correct
D.Ctrl + OCtrl + O
Answer: C — Ctrl + S Ctrl + S saves the file; Ctrl + P prints, Ctrl + N opens a new file and Ctrl + O opens an existing file.Ctrl + S से फाइल save होती है; Ctrl + P से print, Ctrl + N से नई फाइल और Ctrl + O से विद्यमान फाइल खुलती है।
Q13.Software
In MS Excel, the intersection point of a row and a column is called a:
MS Excel में किसी पंक्ति (row) और स्तंभ (column) के मिलने के बिंदु को कहते हैं:
A.CellCell✓ Correct
B.RangeRange
C.FieldField
D.BlockBlock
Answer: A — Cell Every box in an Excel worksheet, formed where a row meets a column, is a cell — identified by an address like B5.Excel worksheet का प्रत्येक खाना, जो पंक्ति और स्तंभ के मिलने से बनता है, cell कहलाता है — इसका पता B5 जैसा होता है।
Q14.Software
Which Excel function is used to add the values of a range of cells?
Excel में किन्हीं cells की श्रेणी के मान जोड़ने के लिए कौन-सा function प्रयुक्त होता है:
A.TOTAL()TOTAL()
B.ADD()ADD()
C.SUM()SUM()✓ Correct
D.PLUS()PLUS()
Answer: C — SUM() The SUM() function adds all the numbers in the selected cells, for example =SUM(A1:A5).SUM() function चयनित cells की सभी संख्याओं को जोड़ता है, उदाहरणतः =SUM(A1:A5)।
Q15.Software
In MS PowerPoint, pressing the F5 key starts the slide show:
MS PowerPoint में F5 दबाने से slide show प्रारंभ होता है:
A.From the current slideवर्तमान slide से
B.From the beginningप्रारंभ से✓ Correct
C.In print previewprint preview में
D.On the last slideअंतिम slide पर
Answer: B — From the beginning F5 begins the full slide show from the first slide; Shift + F5 starts it from the current slide.F5 से पूरा slide show पहली slide से प्रारंभ होता है; Shift + F5 से यह वर्तमान slide से शुरू होता है।
Q16.Software
In Windows, files deleted from the hard disk are first moved to the:
Windows में हार्ड डिस्क से हटाई गई फाइलें पहले जाती हैं:
A.ClipboardClipboard में
B.Control PanelControl Panel में
C.TaskbarTaskbar पर
D.Recycle BinRecycle Bin में✓ Correct
Answer: D — Recycle Bin Deleted files go to the Recycle Bin, from where they can be restored; emptying the Recycle Bin deletes them permanently.हटाई गई फाइलें Recycle Bin में जाती हैं, जहाँ से वे वापस लाई जा सकती हैं; Recycle Bin खाली करने पर वे स्थायी रूप से हट जाती हैं।
Q17.Networking
The main function of DNS (Domain Name System) on the Internet is to:
इंटरनेट पर DNS (Domain Name System) का मुख्य कार्य है:
A.Send e-mailse-mail भेजना
B.Store web pagesweb page रखना
C.Block virusesवायरस रोकना
D.Convert domain names into IP addressesdomain नामों को IP पतों में बदलना✓ Correct
Answer: D — Convert domain names into IP addresses DNS translates easy-to-remember domain names, like the name of a website, into the numeric IP addresses that computers use.DNS याद रखने योग्य domain नामों को उन संख्यात्मक IP पतों में बदलता है जिनका उपयोग कंप्यूटर करते हैं।
Q18.Networking
FTP, the protocol used to transfer files between computers, stands for:
FTP, कंप्यूटरों के बीच फाइलें भेजने वाला protocol, का पूर्ण रूप है:
A.Fast Text ProtocolFast Text Protocol
B.File Typing ProgramFile Typing Program
C.File Transfer ProtocolFile Transfer Protocol✓ Correct
D.Folder Transfer ProcessFolder Transfer Process
Answer: C — File Transfer Protocol FTP stands for File Transfer Protocol; it is the standard rule-set for uploading and downloading files on a network.FTP का अर्थ है File Transfer Protocol; यह नेटवर्क पर फाइलें upload व download करने के नियमों का मानक समूह है।
Q19.Networking
Web pages are mainly written in HTML, which stands for:
Web page मुख्यतः HTML में लिखे जाते हैं, जिसका पूर्ण रूप है:
B.HighText Machine LanguageHighText Machine Language
C.Hyperlink Text Mode LanguageHyperlink Text Mode Language
D.Home Tool Markup LanguageHome Tool Markup Language
Answer: A — HyperText Markup Language HTML stands for HyperText Markup Language, the standard language of tags used to structure web pages.HTML का अर्थ है HyperText Markup Language — web page की संरचना बनाने वाले tags की मानक भाषा।
Q20.Networking
Wi-Fi, used for wireless internet in homes and schools, stands for:
Wi-Fi, जो घरों और विद्यालयों में बेतार इंटरनेट के लिए प्रयुक्त होती है, का पूर्ण रूप माना जाता है:
A.Wide FibreWide Fibre
B.Wireless FidelityWireless Fidelity✓ Correct
C.Wireless FileWireless File
D.Web InterfaceWeb Interface
Answer: B — Wireless Fidelity Wi-Fi is short for Wireless Fidelity; it connects devices to a network through radio waves instead of cables.Wi-Fi, Wireless Fidelity का संक्षिप्त रूप है; यह केबल के स्थान पर रेडियो तरंगों से उपकरणों को नेटवर्क से जोड़ती है।
Q21.Networking
In a ring topology, the computers are connected:
Ring topology में कंप्यूटर जुड़े होते हैं:
A.To one central hub onlyकेवल एक केंद्रीय हब से
B.In a closed circular loopएक बंद वृत्ताकार घेरे में✓ Correct
C.In a straight line open at both endsदोनों सिरों से खुली सीधी रेखा में
D.Directly to the Internet onlyकेवल सीधे इंटरनेट से
Answer: B — In a closed circular loop In a ring topology each computer connects to the next one, forming a closed ring through which data travels from node to node.Ring topology में प्रत्येक कंप्यूटर अगले कंप्यूटर से जुड़कर एक बंद घेरा बनाता है, जिसमें डेटा एक node से दूसरे node तक घूमता है।
Q22.Networking
Which card fitted inside a computer connects it to a network?
कंप्यूटर के अंदर लगी कौन-सी card उसे नेटवर्क से जोड़ती है:
Answer: D — NIC (Network Interface Card) The NIC (Network Interface Card) gives the computer its network port and unique physical (MAC) address for joining a LAN.NIC (Network Interface Card) कंप्यूटर को नेटवर्क port और LAN से जुड़ने के लिए अद्वितीय भौतिक (MAC) पता देती है।
Q23.Programming
In C programming, the operator && represents:
C programming में && operator दर्शाता है:
A.Logical ORLogical OR
B.Bitwise NOTBitwise NOT
C.Logical ANDLogical AND✓ Correct
D.AssignmentAssignment
Answer: C — Logical AND && is the logical AND operator: the combined condition is true only when both sides are true. || is logical OR.&& logical AND operator है: संयुक्त शर्त तभी सत्य होती है जब दोनों पक्ष सत्य हों। || logical OR होता है।
Q24.Programming
In a C printf() statement, the format specifier used for an integer value is:
C के printf() में integer मान के लिए प्रयुक्त format specifier है:
A.%d%d✓ Correct
B.%f%f
C.%c%c
D.%s%s
Answer: A — %d %d prints a decimal integer; %f is for float, %c for a character and %s for a string.%d दशमलव integer छापता है; %f float के लिए, %c अक्षर के लिए और %s string के लिए होता है।
Q25.Programming
A function that calls itself again and again is an example of:
वह function, जो स्वयं को बार-बार पुकारती है, उदाहरण है:
A.RecursionRecursion का✓ Correct
B.Looping in an arrayArray में looping का
C.CompilationCompilation का
D.InheritanceInheritance का
Answer: A — Recursion When a function calls itself with a smaller problem each time, the technique is called recursion; it stops at a base case.जब कोई function प्रत्येक बार छोटी समस्या के साथ स्वयं को पुकारती है तो यह तकनीक recursion कहलाती है; यह base case पर रुकती है।
Q26.Programming
In object-oriented programming, the ability of one function name or operator to work in different ways in different situations is called:
Object-oriented programming में एक ही function नाम या operator का विभिन्न परिस्थितियों में भिन्न प्रकार से कार्य करना कहलाता है:
A.EncapsulationEncapsulation
B.PolymorphismPolymorphism✓ Correct
C.AbstractionAbstraction
D.Data hidingData hiding
Answer: B — Polymorphism Polymorphism means 'many forms' — for example, the + operator adds numbers but joins (concatenates) strings.Polymorphism का अर्थ है 'अनेक रूप' — उदाहरणतः + operator संख्याओं को जोड़ता है परंतु strings को आपस में जोड़ता (concatenate) है।
Q27.Programming
In a linear search, the elements of the list are checked:
Linear search में सूची के तत्व जाँचे जाते हैं:
A.By dividing the list into halvesसूची को आधा-आधा बाँटकर
B.From the middle onlyकेवल मध्य से
C.One by one, in sequence, from the startएक-एक करके, क्रम से, प्रारंभ से✓ Correct
D.Only in reverse sorted orderकेवल उल्टे क्रम में
Answer: C — One by one, in sequence, from the start Linear search compares the wanted value with each element one after another from the beginning until it is found or the list ends.Linear search में खोजा जाने वाला मान प्रत्येक तत्व से एक-एक करके प्रारंभ से तुलना किया जाता है, जब तक मान मिल न जाए या सूची समाप्त न हो जाए।
Q28.Programming
The conditional operator (?:) in C is special because it is the only operator that takes:
C में conditional operator (?:) विशेष है, क्योंकि यह एकमात्र operator है जो लेता है:
A.One operandएक operand
B.Two operandsदो operand
C.Four operandsचार operand
D.Three operandsतीन operand✓ Correct
Answer: D — Three operands The ?: operator works on three operands — a condition, a value if true and a value if false — so it is called the ternary operator.?: operator तीन operands पर कार्य करता है — एक शर्त, सत्य होने पर मान और असत्य होने पर मान — इसलिए इसे ternary operator कहते हैं।
Q29.Programming
In C, which data type is used to store a decimal number like 45.75?
C में 45.75 जैसी दशमलव संख्या रखने के लिए कौन-सा data type प्रयुक्त होता है:
A.intint
B.charchar
C.floatfloat✓ Correct
D.voidvoid
Answer: C — float The float data type stores numbers with a fractional part; int stores whole numbers and char stores a single character.float data type भिन्नात्मक भाग वाली संख्याएँ रखता है; int पूर्ण संख्याएँ और char एकल अक्षर रखता है।
Q30.Programming
The execution of every C program begins from the:
प्रत्येक C प्रोग्राम का निष्पादन (execution) प्रारंभ होता है:
A.header fileheader file से
B.last lineअंतिम पंक्ति से
C.printf() statementprintf() कथन से
D.main() functionmain() function से✓ Correct
Answer: D — main() function However many functions a C program has, the computer always starts running it from main().C प्रोग्राम में चाहे कितने भी function हों, कंप्यूटर उसे सदैव main() से चलाना प्रारंभ करता है।
Q31.DBMS
In SQL, the ORDER BY clause is used to:
SQL में ORDER BY clause का उपयोग होता है:
A.Delete rowsपंक्तियाँ हटाने के लिए
B.Sort the result rowsपरिणाम-पंक्तियों को क्रमबद्ध करने के लिए✓ Correct
C.Create a new tableनई तालिका बनाने के लिए
D.Join two tablesदो तालिकाएँ जोड़ने के लिए
Answer: B — Sort the result rows ORDER BY arranges the rows produced by a SELECT statement, by default in ascending order of the chosen column.ORDER BY, SELECT द्वारा प्राप्त पंक्तियों को चयनित स्तंभ के आरोही क्रम में (डिफ़ॉल्ट रूप से) व्यवस्थित करता है।
Q32.DBMS
In SQL, the WHERE clause in a SELECT statement is used to:
SQL में SELECT कथन का WHERE clause प्रयुक्त होता है:
A.Filter rows according to a conditionशर्त के अनुसार पंक्तियाँ छाँटने के लिए✓ Correct
B.Sort the outputआउटपुट क्रमबद्ध करने के लिए
C.Rename the tableतालिका का नाम बदलने के लिए
D.Count all the columnsसभी स्तंभ गिनने के लिए
Answer: A — Filter rows according to a condition WHERE keeps only those rows that satisfy the given condition, for example WHERE marks > 60.WHERE केवल उन्हीं पंक्तियों को रखता है जो दी गई शर्त पूरी करती हैं, उदाहरणतः WHERE marks > 60।
Q33.DBMS
Which of the following is a database management system (DBMS) software?
निम्नलिखित में से कौन-सा database management system (DBMS) सॉफ़्टवेयर है:
A.MS PaintMS Paint
B.MySQLMySQL✓ Correct
C.Google ChromeGoogle Chrome
D.Windows Media PlayerWindows Media Player
Answer: B — MySQL MySQL is a widely used relational DBMS; Paint is a drawing tool, Chrome a web browser and Media Player a media application.MySQL एक व्यापक रूप से प्रयुक्त relational DBMS है; Paint चित्रकारी का साधन, Chrome web browser और Media Player मीडिया अनुप्रयोग है।
Q34.DBMS
In a relational table, the total number of columns (attributes) is called the:
Relational तालिका में स्तंभों (attributes) की कुल संख्या कहलाती है:
A.CardinalityCardinality
B.DomainDomain
C.DegreeDegree✓ Correct
D.TupleTuple
Answer: C — Degree The degree of a relation is its number of attributes (columns); the number of rows (tuples) is its cardinality.किसी relation की degree उसके attributes (स्तंभों) की संख्या होती है; पंक्तियों (tuples) की संख्या उसकी cardinality होती है।
Q35.DBMS
The overall design or structure of a database is called its:
डेटाबेस की समग्र रूपरेखा या संरचना कहलाती है:
A.SchemaSchema✓ Correct
B.InstanceInstance
C.QueryQuery
D.RecordRecord
Answer: A — Schema The schema is the fixed design of the database — its tables, fields and relations; the data stored at a moment is the instance.Schema डेटाबेस की निश्चित रूपरेखा है — उसकी तालिकाएँ, field और संबंध; किसी क्षण रखा गया डेटा instance कहलाता है।
Q36.Data Structures
In a graph data structure, the points are called vertices and the lines joining them are called:
Graph data structure में बिंदुओं को vertices और उन्हें जोड़ने वाली रेखाओं को कहते हैं:
A.RootsRoots
B.LeavesLeaves
C.LevelsLevels
D.EdgesEdges✓ Correct
Answer: D — Edges A graph is a set of vertices (nodes) joined by edges; trees are a special kind of graph without cycles.Graph, vertices (nodes) का समूह होता है जो edges से जुड़े होते हैं; tree बिना चक्र वाला विशेष प्रकार का graph होता है।
Q37.Cyber Safety
'Malware' is a general term used for:
'Malware' सामान्य शब्द है:
A.Computer hardware partsकंप्यूटर hardware भागों के लिए
B.Internet cablesइंटरनेट केबलों के लिए
C.Licensed softwareलाइसेंसयुक्त सॉफ़्टवेयर के लिए
D.Harmful software like viruses and wormsवायरस व worm जैसे हानिकारक सॉफ़्टवेयर के लिए✓ Correct
Answer: D — Harmful software like viruses and worms Malware (malicious software) is any program made to harm a computer or steal data — viruses, worms and trojans are its common types.Malware (हानिकारक सॉफ़्टवेयर) वह कोई भी प्रोग्राम है जो कंप्यूटर को हानि पहुँचाने या डेटा चुराने के लिए बनाया गया हो — वायरस, worm व trojan इसके सामान्य प्रकार हैं।
Q38.Cyber Safety
In the web address beginning with 'https://', the letter 's' stands for:
'https://' से शुरू होने वाले web पते में अक्षर 's' का अर्थ है:
A.SecureSecure✓ Correct
B.ServerServer
C.SystemSystem
D.SpeedSpeed
Answer: A — Secure HTTPS is the secure form of HTTP: the data exchanged with the website is encrypted, and the 's' stands for Secure.HTTPS, HTTP का सुरक्षित रूप है: वेबसाइट से आदान-प्रदान किया गया डेटा encrypted रहता है, और 's' का अर्थ है Secure।
Q39.ICT in Education
DIKSHA, the national digital platform for school education, mainly helps teachers and students with:
DIKSHA, विद्यालयी शिक्षा का राष्ट्रीय डिजिटल मंच, शिक्षकों और विद्यार्थियों की मुख्यतः सहायता करता है:
A.Buying computersकंप्यूटर खरीदने में
B.Digital learning resources and teacher-training contentडिजिटल अधिगम-सामग्री और शिक्षक-प्रशिक्षण सामग्री में✓ Correct
C.Online bankingऑनलाइन banking में
D.Booking railway ticketsरेल टिकट बुक करने में
Answer: B — Digital learning resources and teacher-training content DIKSHA provides free digital textbooks, lessons, worksheets and teacher-training courses aligned to school curricula.DIKSHA विद्यालयी पाठ्यक्रमों से जुड़ी निःशुल्क डिजिटल पाठ्यपुस्तकें, पाठ, कार्यपत्रक और शिक्षक-प्रशिक्षण पाठ्यक्रम उपलब्ध कराता है।
Q40.Cyber Safety
Keeping backup copies of important data is necessary mainly so that:
महत्त्वपूर्ण डेटा की backup प्रतियाँ रखना मुख्यतः इसलिए आवश्यक है ताकि:
A.The computer runs games fasterकंप्यूटर खेल तेज़ चलाए
B.Files become smaller in sizeफाइलों का आकार छोटा हो जाए
C.Data can be recovered if the original is lost or damagedमूल डेटा खोने या क्षतिग्रस्त होने पर उसे पुनः प्राप्त किया जा सके✓ Correct
D.The monitor lasts longerमॉनिटर अधिक चले
Answer: C — Data can be recovered if the original is lost or damaged A backup is a spare copy kept separately; if the original data is deleted, corrupted or the device fails, the data can be restored from the backup.Backup अलग रखी गई अतिरिक्त प्रति होती है; यदि मूल डेटा मिट जाए, खराब हो जाए या उपकरण विफल हो जाए तो backup से डेटा पुनः प्राप्त किया जा सकता है।