OPENTRAININGTrade / Technician Apprentice · 272 seats · Barauni Refinery, Begusarai (Bihar)By Archit Kumar · Last verified: 9 November 2026
Published On: 6 November 2026 · Last updated: 9 November 2026
✅ Applications are OPEN. Indian Oil Corporation Limited (IOCL) is engaging 272 Trade & Technician Apprentices at its Barauni Refinery, Begusarai (Bihar) under the Apprentices Act, 1961 (Advt. BR/HR/APPR/2026-27/II, dated 06.11.2026). Apply online 6 November 2026 – 6 December 2026 in both steps: Step I on the NAPS portal (codes 101 & 103) or the NATS portal (codes 105 & 107), and Step II — the mandatory “Apprenticeship Additional Data Form: Barauni Refinery 2026” (Microsoft Forms) through iocl.com. No written test — selection is on merit of marks in the prescribed qualification, then document verification and a pre-engagement medical examination. This is apprenticeship training, not a regular job, and IOCL has no obligation to offer employment after the training ends.
⚡ Verified from the official advertisement PDF. Every fact on this page is taken from the official “Detailed Advertisement of Barauni Refinery” (9 pages, dated 06.11.2026) published by IOCL on iocl.com and read on 9 November 2026 — not from any aggregator. Not the same as the IOCL Pipelines Division apprentice notification (Advt. PL/HR/ESTB/APPR (2026), around 500 seats, also dated 06.11.2026) — see that guide separately. Read the official advertisement before applying — the official notice is final.
Overview
Organisation
Indian Oil Corporation Limited (IOCL) — Barauni Refinery, Begusarai, Bihar (a Government of India undertaking)
Advertisement No.
BR/HR/APPR/2026-27/II, dated 06.11.2026
Engagement
Apprentices under the Apprentices Act, 1961 — a Skill Building Initiative. This is training, not employment: on completion of the apprenticeship period, the Corporation shall have no obligation to offer employment to the apprentices, and no apprentice can claim a right to employment on the ground of completing the training.
Training location
Barauni Refinery, Begusarai, Bihar
Total seats
272 (tentative) — Trade Apprentice Attendant Operator (Chemical Plant) 190, Trade Apprentice (Boiler) 38, Technician Apprentice (Mechanical) 21, Technician Apprentice (Instrumentation) 23. The number of seats is tentative and may increase or decrease at the discretion of the management.
6 November 2026 – 6 December 2026 (both Step I and Step II)
Application fee
No application fee is mentioned in the official advertisement.
Stipend
As prescribed under the Apprentices Act / Apprentices Rules and the Corporation’s guidelines — the advertisement does not print any stipend amount.
Selection
No written test — merit list on percentage of marks in the prescribed qualification (descending order), then Document Verification and Pre-Engagement Medical Examination; an offer of engagement is issued after that.
इंडियन ऑयल कॉर्पोरेशन लिमिटेड (IOCL), बरौनी रिफाइनरी, बेगूसराय (बिहार) ने अप्रेंटिस अधिनियम, 1961 के अंतर्गत ट्रेड व टेक्नीशियन अप्रेंटिस की कुल 272 (अनंतिम) सीटों के लिए विज्ञापन संख्या BR/HR/APPR/2026-27/II, दिनांक 06.11.2026 जारी किया है — कोड 101 अटेंडेंट ऑपरेटर (केमिकल प्लांट) 190, कोड 103 बॉयलर 38, कोड 105 मैकेनिकल 21 और कोड 107 इंस्ट्रूमेंटेशन 23। ऑनलाइन आवेदन 6 नवंबर से 6 दिसंबर 2026 तक दोनों चरणों में करना अनिवार्य है: चरण I — कोड 101 व 103 के लिए NAPS पोर्टल (apprenticeshipindia.gov.in, Establishment ID E11191000001) या कोड 105 व 107 के लिए NATS पोर्टल (nats.education.gov.in, Establishment ID EBRBEC000003) पर; चरण II — iocl.com के माध्यम से Microsoft Forms “Apprenticeship Additional Data Form: Barauni Refinery 2026” भरना। आयु 30.11.2026 को 18–24 वर्ष है। कोई लिखित परीक्षा नहीं होगी — चयन निर्धारित योग्यता के अंकों की मेरिट, दस्तावेज़ सत्यापन और नियुक्ति-पूर्व चिकित्सा जाँच से होगा। यह प्रशिक्षण है, नियमित नौकरी नहीं; प्रशिक्षण पूरा होने पर IOCL रोज़गार देने के लिए बाध्य नहीं है। आवेदन से पहले आधिकारिक विज्ञापन अवश्य पढ़ें।
Important Dates
Advertisement / notification date
6 November 2026 (Advt. BR/HR/APPR/2026-27/II)
Online applications open
6 November 2026 — on the NAPS / NATS portal and for the Microsoft Forms additional data form
Last date to apply online
6 December 2026 — both Step I (NAPS / NATS) and Step II (Microsoft Forms) must be completed by this date
Reckoning date for age & qualification
30 November 2026
Tentative list of candidates called for Document Verification
11 December 2026
Tentative Document Verification
14 December 2026 to 18 December 2026
Vacancy & Post Details — 272 Seats
Seats are tentative. Reservation is as per the prescribed reservation of the concerned state. PwBD candidates can apply only against codes 105 & 107 (the identified seats); PwBD reservation is horizontal.
Code
Trade / Discipline
Qualification
Training
Total
UR
EWS
SC
ST
OBC (NCL)
PwBD
101
Trade Apprentice — Attendant Operator (Chemical Plant), Discipline: Chemical
3-year B.Sc (Maths, Physics, Chemistry or Industrial Chemistry)
12 months
190
88
19
30
2
51
0
103
Trade Apprentice (Boiler), Discipline: Mechanical
3-year B.Sc (Maths, Physics, Chemistry or Industrial Chemistry)
3-year Diploma in Instrumentation Engineering / Instrumentation & Electronics / Instrumentation & Control Engineering / Applied Electronics and Instrumentation Engineering
12 months
23
11
2
4
0
6
5
Total
272
126
27
43
3
73
10
UR = Unreserved, EWS = Economically Weaker Section, SC = Scheduled Caste, ST = Scheduled Tribe, OBC (NCL) = Other Backward Class — Non-Creamy Layer, PwBD = Persons with Benchmark Disability. The PwBD figures are part of the horizontal reservation within the totals above.
Eligibility
The candidate must already have passed the prescribed qualification as on the reckoning date, 30 November 2026. Candidates whose result of the qualifying examination is awaited as on that date are not eligible. Only the branch / subjects specified against a code count — no claim of an equivalent qualification will be entertained.
Codes 101 & 103 (Trade Apprentice)
3-year B.Sc (Maths, Physics, Chemistry or Industrial Chemistry), regular full-time, from a recognised Board / University / Institute
Code 105 (Technician Apprentice — Mechanical)
3-year Diploma in Mechanical Engineering, regular full-time
3-year Diploma in Instrumentation Engineering / Instrumentation & Electronics / Instrumentation & Control Engineering / Applied Electronics and Instrumentation Engineering, regular full-time
Minimum marks
50% aggregate — relaxed to 45% for SC / ST and PwBD candidates for the seats reserved for them. Where CGPA / OGPA or a letter grade is awarded, the equivalent aggregate percentage must be entered in the Microsoft Form as per the Board / University / Institute norms, and the conversion certificate must be produced at document verification.
Mode of study
Regular full-time only. Qualifications acquired through part-time / correspondence / distance education are NOT eligible.
Lateral-entry diploma
Diploma holders admitted under the recognised lateral-entry scheme (Class-XII (Sc.) / ITI admitted in the 2nd year) are also eligible, on the aggregate of all semesters, subject to the prescribed percentage.
Higher professional qualifications are NOT eligible: candidates possessing BE / B.Tech, MBA, CA, LLB, MCA or any such equivalent qualification — or who complete such a qualification on or before joining the apprenticeship training — shall not be eligible. A declaration to this effect is obtained at the time of engagement.
Five-year rule: candidates who have completed five years after acquiring the prescribed qualification as on 30.11.2026 are not eligible.
Experience bar: candidates with job experience of one year or more after attaining the prescribed qualification are not eligible.
One trade only: a candidate can apply for only one trade / discipline. A B.Sc candidate must choose either code 101 or code 103. Applications for more than one trade / discipline will be summarily rejected.
Earlier apprenticeship: candidates who have completed apprenticeship training earlier in a different trade / discipline may apply, subject to the gap rules in the advertisement (normally a minimum one-year gap as on 30.11.2026 from completion of the previous training, with the exceptions stated there); preference is given to candidates applying for apprenticeship training for the first time. A candidate whose earlier contract was terminated for failure to carry out the terms of the contract is not eligible. An affidavit (Annexure-A of the advertisement) confirming compliance with the eligibility conditions is required at document verification.
PwBD: engagement is only against the identified seats under codes 105 & 107, for the disability categories listed in the advertisement (low vision / blind, hard of hearing / deaf, musculoskeletal and multiple disabilities), with a disability certificate from the competent authority.
Age Limit
Age (General / EWS)
Minimum 18 years, maximum 24 years as on 30 November 2026
Relaxation — SC / ST
Up to 5 years (for candidates considered against reserved positions)
Relaxation — OBC (NCL)
Up to 3 years (for candidates considered against reserved positions)
Relaxation — PwBD
Up to 10 years, irrespective of reservation of the seat; a further 5 years for PwBD candidates belonging to SC / ST and 3 years for PwBD-OBC (NCL) candidates, for reserved positions of the respective category
Proof of age
Only the mark sheet / certificate issued by the Board of Secondary Education for passing the Matriculation (Class X) examination is accepted
Reservation & certificates: OBC (NCL) candidates must submit the caste certificate in the Government of India proforma, with non-creamy-layer status valid as on 30.11.2026; creamy-layer OBC candidates may apply only as UR if they meet the UR age criteria. EWS candidates must submit an Income & Asset Certificate from the competent authority (or the prescribed undertaking at document verification). SC / ST / PwBD candidates appearing for document verification are reimbursed single second-class railway fare by the shortest route (distance not less than 30 km) on production of the ticket.
Application Fee
No application fee is mentioned in the official advertisement. Apply only through the official NAPS / NATS portals and the IOCL website (iocl.com) — IOCL cautions candidates not to fall prey to dubious agencies or individuals demanding money; rely only on information hosted on www.iocl.com and Employment News / press notifications.
Selection Process — No Written Test
There shall be no written test. Candidates registered on the NAPS / NATS portal and applying against this notification are considered as follows:
Merit on qualification marks: selection is on the basis of the percentage of marks in descending order (aggregate of marks of all subjects of all years / semesters) obtained in the prescribed qualification for the trade applied for, subject to meeting the notified eligibility criteria. Preference is given to candidates applying for apprenticeship training for the first time.
Tie-break: if two or more candidates have the same percentage, the candidate senior by age (date of birth) ranks higher; if the date of birth is also the same, the candidate with the higher percentage of marks in Matriculation is considered.
Document Verification: candidates shortlisted on their position in the merit list, subject to the number of seats in the respective trade / discipline, are called for document verification. The tentative list of candidates called for document verification is to be published on 11 December 2026, and document verification is tentatively scheduled for 14–18 December 2026.
Pre-Engagement Medical Examination: candidates must fulfil the minimum physical fitness standards under the Apprentices Act (the guidelines are on www.iocl.com). Only candidates declared fit are considered for engagement.
Offer of engagement: finally shortlisted candidates whose documents, including the pre-engagement medical fitness certificate, are found in order are issued the offer of engagement.
Filling of seats is solely at the discretion of the management, based on the suitability of candidates.
Stipend & Other Conditions of Training
Stipend: the rate of stipend payable per month shall be as prescribed under the Apprentices Act, 1961/1973 and the Apprentices Rules, 1992 (as amended) and the Corporation’s guidelines. The advertisement does not state any amount.
No employment obligation: on completion of the apprenticeship period, the Corporation shall have no obligation to offer employment, and no apprentice can claim a right to employment on the ground of completion of apprenticeship.
PPE: apprentices selected against codes 101, 103, 105 & 107 are provided one pair of safety shoes and a helmet (returnable on completion of training), wherever applicable.
Accommodation / HRA: no HRA or company accommodation is provided to apprentices.
Leave: General Leave 32 days (at 8 days per quarter, including on medical grounds) and Casual Leave 12 days per calendar year (pro-rata), plus the holidays observed in the establishment; leave not availed lapses at the end of the apprenticeship period.
Insurance: apprentices are covered under suitable accident insurance coverage, and are governed by the Certified Standing Orders applicable to workmen at the establishment.
Declarations: candidates must declare reported ailments / deficiencies, any past UNFIT finding in a medical examination for apprentice engagement or regular employment, and any arrest, prosecution, detention, conviction or debarment, as required by the advertisement.
Documents for Document Verification
Bring the following in original, along with one self-attested copy of each:
10th Pass / Matriculation certificate issued by the concerned education board, as proof of date of birth
Conversion certificate from CGPA / OGPA / letter grade to percentage of marks, if applicable, from the concerned University / Institute
Certificate mentioning the date of publication of result, if applicable, from the Principal of the Polytechnic / College / Institute — the certificate must also state that the course was completed through regular full-time mode and mention the candidate’s good conduct
SC / ST / Disability Certificate / OBC (NCL) Certificate along with the “Declaration” / EWS Income & Asset Certificate / “Declaration for Economically Weaker Sections candidates” — in the prescribed format (available on www.iocl.com), issued by the competent authority
Print of the NATS / NAPS portal registration with applicant details
Affidavit confirming compliance with all eligibility conditions for undergoing apprenticeship, as per the standard template (Annexure-A of the advertisement)
One photo ID proof in original — Aadhaar Card / PAN Card / Voter ID Card / Driving License / Passport — and any other certificate or document as specified
How to Apply — Both Steps Are Compulsory
Applications are accepted online only, from 06.11.2026 to 06.12.2026. On iocl.com, go to ‘What’s New’ → “Engagement of Apprentices at Barauni Refinery 2026-27 (II)” to read the detailed advertisement and reach the apply links. You must have a valid Apprentice Registration / Enrolment Number on the NAPS / NATS portal, a profile that is 100% correctly updated, and an active email ID and mobile number (the same in both steps) that remain valid for at least the next one year.
Step I — Register and apply on the NAPS / NATS portal
Codes 101 & 103 (Trade Apprentice): register on the NAPS portal apprenticeshipindia.gov.in, open “Apprenticeship Opportunities”, search by location for the IOCL Refinery Unit and select the respective trade, then apply against the opportunity of Barauni Refinery — Establishment ID E11191000001.
Codes 105 & 107 (Technician Apprentice): register on the NATS portal / Board of Apprenticeship Training (BOAT) nats.education.gov.in, then apply on your dashboard to the advertisement notified by IOCL Barauni Refinery — Establishment ID EBRBEC000003.
Before applying, make sure your profile (personal details, educational details, category and aggregate percentage) appears correctly; contact the NAPS / NATS office for any correction. Ensure you have successfully applied for the relevant opportunity.
Step II — Fill the Microsoft Forms additional data form
After applying on the NAPS / NATS portal, submit your details mandatorily in the Microsoft Form “Apprenticeship Additional Data Form: Barauni Refinery 2026”, reached through the link on iocl.com. Submit only one response.
The details in the Microsoft Form — including the Enrolment No. / Student ID / Registration No. — must be factually correct and must match Step I.
Completion of both Step I and Step II is compulsory for the application to be complete and for the candidature to be considered. Incomplete applications, applications not fulfilling the eligibility criteria, and applications in any mode other than online will be treated as rejected.
Helpdesk
Barauni Refinery — phone 06243-275258 and 06243-275240; email [email protected]. Further information about the document verification call, results and any corrigendum / addendum will be available only on www.iocl.com and by email — keep visiting the website and check your registered email regularly. Disputes, if any, are subject to the jurisdiction of the local court at Begusarai. Canvassing in any form renders a candidate ineligible.
FAQs
What is the last date to apply for IOCL Barauni Refinery Apprentice 2026-27?
The last date is 6 December 2026. Both steps must be completed by then — Step I on the NAPS portal (codes 101 & 103) or NATS portal (codes 105 & 107), and Step II, the Microsoft Forms “Apprenticeship Additional Data Form: Barauni Refinery 2026” through iocl.com.
Is there a written test for IOCL Barauni apprentice selection?
No. The advertisement states there shall be no written test. Selection is on the percentage of marks in the prescribed qualification, in descending order, followed by document verification and a pre-engagement medical examination.
What is the application fee?
No application fee is mentioned in the official advertisement.
What is the age limit?
18–24 years as on 30 November 2026 for General / EWS candidates, with relaxation of 5 years for SC / ST, 3 years for OBC (NCL) and 10 years for PwBD candidates (with the additional category relaxation stated in the advertisement).
Can I apply for more than one trade?
No. A candidate can apply for only one trade / discipline — B.Sc candidates must choose either code 101 or code 103. Applications for more than one trade / discipline are summarily rejected.
What stipend will apprentices get?
The stipend is as prescribed under the Apprentices Act / Apprentices Rules and the Corporation’s guidelines. The advertisement does not print any amount.
Will I get a job in IOCL after the apprenticeship?
No — this is training under the Apprentices Act, 1961. The advertisement states clearly that on completion of the apprenticeship period the Corporation shall have no obligation to offer employment, and no apprentice can claim a right to employment on the ground of completing the training.
Follow this engagement through every stage — apply from the official links on this page, then track the document verification list here as it is released.
Around 500 apprentice seats — Technician Apprentice, Trade Apprentice (Assistant–HR, Accountant) and Data Entry Operator across the five pipeline regions; 12 months training under the Apprentices Act, 1961 — not a regular job.